PART NUMBER | VMA-H014 | ||||||||||||||||||||||||||||||||||||
HISTORICAL INFO |
|||||||||||||||||||||||||||||||||||||
- First Introduced |
19990917 | ||||||||||||||||||||||||||||||||||||
- Availability Status |
Shipping as of 19991023 | ||||||||||||||||||||||||||||||||||||
- Supercedes |
Ugly Stik 40 #VMA-050 |
||||||||||||||||||||||||||||||||||||
- Superceded by |
Brand New Release | ||||||||||||||||||||||||||||||||||||
- Change Log Highlights | [Click Here] | ||||||||||||||||||||||||||||||||||||
RECOMMENDED FOR |
Sport Fun Fly - Aerobatic - Advanced Trainer. Not intended as a primary trainer. For those who can fly already and want More Fun for less Funds! |
||||||||||||||||||||||||||||||||||||
HOURS TO FINISH |
Six |
||||||||||||||||||||||||||||||||||||
WING |
|||||||||||||||||||||||||||||||||||||
- Location on Fuselage |
Above fuselage |
||||||||||||||||||||||||||||||||||||
- Span |
57 in. |
||||||||||||||||||||||||||||||||||||
- Area* |
570 sq in. |
||||||||||||||||||||||||||||||||||||
- Airfoil |
Symmetrical |
||||||||||||||||||||||||||||||||||||
- Taper |
None |
||||||||||||||||||||||||||||||||||||
- Chord Size |
Root = 10 in. (254 mm) Tip = 10 in. (254 mm) |
||||||||||||||||||||||||||||||||||||
- Thickness |
1-21/32 in. (42 mm) |
||||||||||||||||||||||||||||||||||||
- Construction |
Wood - Built Up |
||||||||||||||||||||||||||||||||||||
- Aileron Type |
Strip w/Torq Rods |
||||||||||||||||||||||||||||||||||||
- Pre-Hinged |
Yes. 4 Hinges per Aileron. |
||||||||||||||||||||||||||||||||||||
- Hinge Type |
Real Hinge with Metal Pin |
||||||||||||||||||||||||||||||||||||
- Hinges Factory Pinned? | Yes. Inboard and outboard on both ailerons. 4 pins per pinned hinge. | ||||||||||||||||||||||||||||||||||||
- How Joined? |
Wood Dihedral Brace plus 2 Wood Alignment Dowels and 30 minute Epoxy. |
||||||||||||||||||||||||||||||||||||
- How Mount to Fuse? |
4 Nylon Bolts |
||||||||||||||||||||||||||||||||||||
- Servo for Wing? |
Yes 1 (not provided) |
||||||||||||||||||||||||||||||||||||
- Servo Location |
Centre Section Bottom of Wing |
||||||||||||||||||||||||||||||||||||
- Second Wing Servo |
na |
||||||||||||||||||||||||||||||||||||
- Color Top |
Red with White and Black Trim. Grey Panel Lines | ||||||||||||||||||||||||||||||||||||
- Color Bottom |
Yellow with Black and Red Trim. Grey Panel Lines | ||||||||||||||||||||||||||||||||||||
- Color Pattern Top vs Bottom |
Different (Very) |
||||||||||||||||||||||||||||||||||||
- Picture of Wing Top and Bottom.
Note totally different colors and graphics pattern of the top vs bottom of the wings. Makes for high visibility and easy orientation. |
imagescommon/h014/h014_pix_singles_common/
h014_wing_topandbottom.jpg Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
-
Picture of Wing Tip illustrating graphics and shape.. Note, wing tip is built up from wood and covering. No plastic!. |
imagescommon/h014/h014_pix_singles_common/
h014_wing_tip_ graphics.jpg Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
More Pictures of Wing | |||||||||||||||||||||||||||||||||||||
FUSELAGE |
|||||||||||||||||||||||||||||||||||||
- Length* |
44 in (1117 mm) |
||||||||||||||||||||||||||||||||||||
- Construction |
Wood - Built Up |
||||||||||||||||||||||||||||||||||||
- Pushrods |
Preinstalled |
||||||||||||||||||||||||||||||||||||
- Pushrod Material |
Steel Rods w/thread on both ends. Running in plastic guide tubes. Plain Rod for Nose Wheel. Variable Length two piece rod for throttle w/thread on both ends. | ||||||||||||||||||||||||||||||||||||
- Servo Tray |
Preinstalled. Universal adjustable for F/JR/Air/HiT |
||||||||||||||||||||||||||||||||||||
- Color |
Red with White and Black Trim. White Panel Lines. Yellow Bottom. | ||||||||||||||||||||||||||||||||||||
- Servos Needed? |
1 Throttle, 1 Elev, 1 Rudder |
||||||||||||||||||||||||||||||||||||
- Servo Locations |
Tray Centre Inside Fuse |
||||||||||||||||||||||||||||||||||||
- Picture of Fuselage as seen from right front quarter. | imagescommon/h014/h014_pix_singles_common/
h014_ fuse_from_front_right copy.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
HORIZONTAL STAB/ELEV |
|||||||||||||||||||||||||||||||||||||
- Horiz Stab Span | 21-7/8 in. (555 mm) | ||||||||||||||||||||||||||||||||||||
- Horiz Stab Area |
76 sq in | ||||||||||||||||||||||||||||||||||||
- Elevator Area |
28 sq in | ||||||||||||||||||||||||||||||||||||
- Construction |
Wood - Built Up | ||||||||||||||||||||||||||||||||||||
- Pre-Hinged |
Yes. 6 Hinges. |
||||||||||||||||||||||||||||||||||||
- Hinge Type |
Real Hinge with Metal Pin |
||||||||||||||||||||||||||||||||||||
- Hinges Factory Pinned? | Yes. Inboard and outboard on stabilizers.4 Pins per pinned hinge. | ||||||||||||||||||||||||||||||||||||
- Airfoil |
Slab |
||||||||||||||||||||||||||||||||||||
- How Mount to Fuse? |
Insert into horizontal slot in fuselage and glue with 30 minute Epoxy. | ||||||||||||||||||||||||||||||||||||
- Support Struts? |
No. Not Required |
||||||||||||||||||||||||||||||||||||
- Color Top |
Red with White and Black Trim. Grey Panel Lines | ||||||||||||||||||||||||||||||||||||
- Color Bottom |
Yellow with Black and Red Trim. Grey Panel Lines | ||||||||||||||||||||||||||||||||||||
- Color Pattern Top vs Bottom |
Different (Very) |
||||||||||||||||||||||||||||||||||||
- Picture of Horizontal Stabilizer and Elevator. Top and Bottom views shown. |
imagescommon/h014/h014_pix_singles_common/ h014_ stab_horiz_ top_ and_ bottom.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
VERTICAL STAB/RUDDER |
|||||||||||||||||||||||||||||||||||||
- Vertical Stab Area |
26 sq in | ||||||||||||||||||||||||||||||||||||
- Rudder Area |
16 sq in | ||||||||||||||||||||||||||||||||||||
- Construction |
Wood - Built Up |
||||||||||||||||||||||||||||||||||||
- Pre-Hinged |
Yes. 3 Hinges. |
||||||||||||||||||||||||||||||||||||
- Hinge Type |
Real Hinge with Metal Pin |
||||||||||||||||||||||||||||||||||||
- Hinges Factory Pinned? | Yes. Upper and Lower on Rudder. 4 pins per pinned hinge. | ||||||||||||||||||||||||||||||||||||
- Airfoil |
Slab |
||||||||||||||||||||||||||||||||||||
- How Mount to Fuse? |
Insert in vertical slot in fuselage and glue with 30 minute Epoxy. |
||||||||||||||||||||||||||||||||||||
- Color |
Red with White and Black Trim. Grey Panel Lines | ||||||||||||||||||||||||||||||||||||
- Color Pattern Left vs Right | Same | ||||||||||||||||||||||||||||||||||||
- Picture of Vertical Stabilizer and Rudder. [Note Bolt-On hardware with unique captive system. No Glue Needed!] |
imagescommon/h014/h014_pix_singles_common/ h014_stab_vert copy.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
COVERING |
|||||||||||||||||||||||||||||||||||||
- "Sure Seal" |
Thermal Shrink Film |
||||||||||||||||||||||||||||||||||||
- Self Adhesive |
Low Temperature |
||||||||||||||||||||||||||||||||||||
- Patchable |
Yes. Use patch sheet provided or aftermarket use Ultracote Plus or Ultracote Regular. |
||||||||||||||||||||||||||||||||||||
- Patch Sheet Provided? |
Yes. Red and Yellow. Use Factory Patch Sheets if possible. Aftermarket covering will not match colors exactly. |
||||||||||||||||||||||||||||||||||||
-
Ultracote System Approx Color Match.
Note: We recommend Ultracote Plus and a Heat GUN for patching using after market covering. |
|
||||||||||||||||||||||||||||||||||||
LANDING GEAR |
Trike |
||||||||||||||||||||||||||||||||||||
- Main Gear |
5/32 wire pre-bent and chromed |
||||||||||||||||||||||||||||||||||||
- Picture of Main Gear. [Shows right end only]. Approx 5/32" wire. |
imagescommon/h014/h014_pix_singles_common/ h014_main_gear copy.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
- Picture of Nose Gear.
|
imagescommon/h014/h014_pix_singles_common/ h014_nose_gear copy.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
- Stance - Between Wheels | 12-3/4 in. (324 mm) between inboard side of wheels. | ||||||||||||||||||||||||||||||||||||
- Main Wheels |
Two of 2-7/16 in / 62 mm. Ultralight Treaded. |
||||||||||||||||||||||||||||||||||||
- Main Wheel Pants | na | ||||||||||||||||||||||||||||||||||||
- Retract Ready? | No | ||||||||||||||||||||||||||||||||||||
- Retracts that fit... | na | ||||||||||||||||||||||||||||||||||||
- Nose Gear |
Prebent Chrome Steel with shock coil |
||||||||||||||||||||||||||||||||||||
- Nose Wheel |
One of 2-7/16 in / 62 mm. Ultralight Treaded. |
||||||||||||||||||||||||||||||||||||
- Nose Wheel Pant | No | ||||||||||||||||||||||||||||||||||||
- Tail Wheel Assembly |
na |
||||||||||||||||||||||||||||||||||||
- Tail Wheel Steerable? | na | ||||||||||||||||||||||||||||||||||||
- Tail Wheel |
na | ||||||||||||||||||||||||||||||||||||
COWL |
|||||||||||||||||||||||||||||||||||||
- included | na | ||||||||||||||||||||||||||||||||||||
- material | na | ||||||||||||||||||||||||||||||||||||
- color | na | ||||||||||||||||||||||||||||||||||||
- trim supplied | na | ||||||||||||||||||||||||||||||||||||
- trim applied by? | na | ||||||||||||||||||||||||||||||||||||
ENGINE |
Not included. See Options. |
||||||||||||||||||||||||||||||||||||
- 2 cycle |
.32-.46 cu in (ENYA Super Sport 40 Recommended) |
||||||||||||||||||||||||||||||||||||
- 4 cycle |
.30-.48 cu in | ||||||||||||||||||||||||||||||||||||
ENGINE MOUNT |
T-bar Beams - Aluminum Clamp Type all pretapped. |
||||||||||||||||||||||||||||||||||||
- Firewall Predrilled for Mount? |
Yes. Mount Pre-installed. |
||||||||||||||||||||||||||||||||||||
- Predrilled orientation choices |
na |
||||||||||||||||||||||||||||||||||||
- Orientation Recommended |
Upright as pre-installed. |
||||||||||||||||||||||||||||||||||||
- Mount Installed? |
Yes. Upright |
||||||||||||||||||||||||||||||||||||
- Engine Lug Length - Max |
1-5/8 in. (41 mm) |
||||||||||||||||||||||||||||||||||||
- Engine Width - Max |
At Crankcase = 1-7/16 in. (36 mm) |
||||||||||||||||||||||||||||||||||||
- Beam Length |
2-7/8 (73 mm) flat useable. 3-1/2 in. (89 mm) from firewall to tips. | ||||||||||||||||||||||||||||||||||||
- Power Module System |
No. Single Fixed Firewall |
||||||||||||||||||||||||||||||||||||
-
Picture of T-bar Engine Mounts preinstalled by factory. Mounts are solid cast aluminum with all holes pretapped. Engine clamps make installing and aligning engine easy with no drilling required. |
imagescommon/h014/h014_pix_singles_common/h014_ fuse_from front_right copy.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
More Pictures of Engine Mount | |||||||||||||||||||||||||||||||||||||
RADIO |
Not included. See Options |
||||||||||||||||||||||||||||||||||||
- 4 channels |
Need four servos. |
||||||||||||||||||||||||||||||||||||
SERVO TRAY | Preinstalled. Universal adjustable for F/JR/Air/HiT. | ||||||||||||||||||||||||||||||||||||
- Picture of Servo Tray with universally adjustable sliders highlighted in purple shading. Adjust to fit length of Futaba, Airtronics, JR or Hi-Tech standard servo. Tighten screws to lock slider into position. | |||||||||||||||||||||||||||||||||||||
FUEL TANK |
|||||||||||||||||||||||||||||||||||||
- Type |
Plastic |
||||||||||||||||||||||||||||||||||||
- Size |
10.5oz / 300 cc |
||||||||||||||||||||||||||||||||||||
- Clunk |
Yes |
||||||||||||||||||||||||||||||||||||
- Silicone Tubing |
No |
||||||||||||||||||||||||||||||||||||
- Metal Tubing |
2 - Prebent & fitted in stopper |
||||||||||||||||||||||||||||||||||||
HARDWARE SET | |||||||||||||||||||||||||||||||||||||
imagescommon/h014/h014_pix_singles_common/
h014_hardware_set_all.jpg
Picture will be added here shortly. Please check again soon. |
|||||||||||||||||||||||||||||||||||||
WEIGHT |
|||||||||||||||||||||||||||||||||||||
- Empty* - Assembled |
3.50 lbs (1590 g) | ||||||||||||||||||||||||||||||||||||
- Flying Dry* - 2 cycle |
5.0-5.5 lbs (2273 - 2500 g) | ||||||||||||||||||||||||||||||||||||
- Flying Dry* - 4 cycle |
5.5 - 6.0 lbs (2500 - 2727 g) | ||||||||||||||||||||||||||||||||||||
WING LOADING |
|||||||||||||||||||||||||||||||||||||
- Empty* - Assembled |
14.1 oz/sq ft @ 3.50 lbs | ||||||||||||||||||||||||||||||||||||
- Flying Dry* - 2 cycle |
21.2 oz/sq ft @ 5.25 lbs | ||||||||||||||||||||||||||||||||||||
- Flying Dry* - 4 cycle |
23.2 oz/sq ft @ 5.75 lbs | ||||||||||||||||||||||||||||||||||||
SET UP SPECS |
|||||||||||||||||||||||||||||||||||||
- CG Location |
3 to 3-1/2 in. (76-89) back from leading edge of wing | ||||||||||||||||||||||||||||||||||||
- Aileron Throw. (Use Low Rate for first flights and/or if your radio does not support dual rates) |
|
||||||||||||||||||||||||||||||||||||
- Rudder Throw at Widest section of Rudder. (Use Low Rate for first flights and/or if your radio does not support dual rates) |
|
||||||||||||||||||||||||||||||||||||
- Elevator Throw (Use Low Rate for first flights and/or if your radio does not support dual rates) |
|
||||||||||||||||||||||||||||||||||||
- Engine Thrust Line |
1-11/16 in. (43 mm) from top of firewall |
||||||||||||||||||||||||||||||||||||
- Engine Offset |
None |
||||||||||||||||||||||||||||||||||||
SHIPPING BOX |
|||||||||||||||||||||||||||||||||||||
- Cardboard |
Brown |
||||||||||||||||||||||||||||||||||||
- Size Length x Width x Depth |
40-7/8 x 17-1/4 x 4-3/16 in. (1038 x 438 x 106 mm) |
||||||||||||||||||||||||||||||||||||
- Length plus Girth |
83-3/4 in. (2126 mm) | ||||||||||||||||||||||||||||||||||||
- Volume |
1.71 cu ft (.0482 cu m) | ||||||||||||||||||||||||||||||||||||
- Weight with kit |
8.5 lbs (3864 g) | ||||||||||||||||||||||||||||||||||||
DISPLAY BOX |
|||||||||||||||||||||||||||||||||||||
- Cardboard |
White |
||||||||||||||||||||||||||||||||||||
- Protected by |
Plastic Bag & Shipping Box |
||||||||||||||||||||||||||||||||||||
- Size Length x Width x Depth |
40-5/8 x 17 x 3-15/16 in. (1032 x 432 x 100 mm) |
||||||||||||||||||||||||||||||||||||
- Length plus girth |
82-1/2 in. (2096 mm) | ||||||||||||||||||||||||||||||||||||
- Volume |
1.58 cu ft (.0445 cu m) | ||||||||||||||||||||||||||||||||||||
- Weight with kit & protective plastic bag |
6.6 lbs (3003 g) | ||||||||||||||||||||||||||||||||||||
- Label front colors |
Colors = Red, Orange, Black, White, Yellow and Green |
||||||||||||||||||||||||||||||||||||
- Label front size | 30-5/8 x 15-5/8 in. (778 x 397 mm) |
||||||||||||||||||||||||||||||||||||
- Label front picture. |
imagescommon/h014/h014_pix_singles_common/ h014_boxart_front.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
- Label end panel |
Colors = Red, Orange, Black, White, Yellow and Green |
||||||||||||||||||||||||||||||||||||
- Label end panel size | 14-7/8 x 3-5/8 in. (378 x 92 mm) |
||||||||||||||||||||||||||||||||||||
- Label end panel picture. |
imagescommon/h014/h014_pix_singles_common/ h014_boxart_end.jpg
Picture will be added here shortly. Please check again soon. |
||||||||||||||||||||||||||||||||||||
* NOTES & LEGEND |
|||||||||||||||||||||||||||||||||||||
- Accuracy of Dimensions | Dimensions provided here are within +/- 3% in production. | ||||||||||||||||||||||||||||||||||||
- na |
Not applicable this model |
||||||||||||||||||||||||||||||||||||
- blank data or information | Not known at this time | ||||||||||||||||||||||||||||||||||||
- [info?] | Estimated. Yet to be confirmed. | ||||||||||||||||||||||||||||||||||||
- Area* of Wing |
Includes wing saddle area |
||||||||||||||||||||||||||||||||||||
- Length* of Fuse |
From Spinner back plate to Trailing Edge of Rudder | ||||||||||||||||||||||||||||||||||||
- Empty* Weight |
No radio, engine or fuel |
||||||||||||||||||||||||||||||||||||
- Flying Dry* Weight |
With radio, engine. No fuel |
||||||||||||||||||||||||||||||||||||
- Flying Dry* Loading |
With radio, engine. No fuel |
©Richmond RC Supply Ltd. All Rights Reserved. Unauthorized commercial use strictly prohibited. |
Prices, Specifications, Features and Availability subject to change without notice |
Production Colors and Graphic Schemas may differ from that shown. |
Artwork, text and information for the use of consumers and Richmond RC customers only |
For information contact webmaster@richmondrc.com |
2000-02-20 11:30:23