More Pictures of Hot Rod Vertical Stabilizer

Picture of Vertical Stabilizer and Rudder.

[Note Tail Wheel steering coupler pre-installalled at bottom of rudder.

Note Bolt-On hardware with unique captive system. No Glue Needed!]

imagescommon/h014/h014_pix_singles_common/

h014_stab_vert copy.jpg

Picture will be added here shortly. Please check again soon. 

Tail section of fuselage before mounting horizontal and vertical stabilizers [showing machined slot for horizontal stabilizer.]

View from left side of fuselage looking slightly aft.

h014_fuse_left_rear_with_clevis copy.jpg

Picture will be added here shortly. Please check again soon. 

Note holes for the vertical stabilizer mounting bolts which will pass from the vertical stab through the fuselage, through the horizontal stab to retainers on the bottom of the fuselage. ]

h014_ stab_horiz_ installation_ first_ step copy.jpg

Picture will be added here shortly. Please check again soon. 

View from top right side of tail section looking slightly forward. [Note horizontal stab inserted into machined slot in fuselage tail section and vertical stab mounting bolts partically inserted into fuselage and horizontal stab. The vertical stab is now ready to be pushed down and into the machined slot in the top of the fuselage]

h014_ stab_vert_ install_ first step copy.jpg

Picture will be added here shortly. Please check again soon. 

View from top right side of tail section looking slightly aft. [Note horizontal stab inserted into machined slot in fuselage tail section and vertical stab mounting bolts partically inserted into fuselage and horizontal stab. The vertical stab is now ready to be pushed down and into the machined slot in the top of the fuselage]

h014_ stab_vert_ install_ first step_ b copy.jpg

Picture will be added here shortly. Please check again soon. 

View from bottom of fuselage [after vertical stab has been pushed down and into the machined slot in the top of the fuselage. Note the two holes in bottom of fuselage. Within the holes can be seen the bottom of the vertical stab mounting bolts]

h014_ stab_vert_ bolts_ from_ bottom copy.jpg

Picture will be added here shortly. Please check again soon. 

View from bottom of fuselage [after vertical stab has been pushed down and into the machined slot in the top of the fuselage. Note the two screw on retainers that have been loosely fitted into the fuselage to engage with the vertical stab mouting bolts. Ready for tightening to cinch the vertical and horizontal stabilizers into position.]

h014_ stab_vert_captive_ retainers_ loose copy.jpg

Picture will be added here shortly. Please check again soon. 

View from bottom of fuselage [after the two screw on retainers have been tightened to cinch the vertical and horizontal stabilizers into position and attach them firmly to the fuselage].

h014_stab_vert_ captive_retainers_ tight copy.jpg

Picture will be added here shortly. Please check again soon.