|
Uses:
Z-7 DEBONDER works to remove cured CA glues
from skin, work surfaces, most plastics, and model finishes. Z-7 DEBONDER
can also be used to remove adhesive left from stickers, pen and marker inks,
some paints and stains, decals, correction fluids and finger nail polish.
You can use Z-7 DEBONDER to weatherize and highlight your models and soften
CA glue prior to sanding.
Helpful Hints:
Z-7 DEBONDER Is best
applied directly from the bottle right onto the glue to be removed. Z-7
DEBONDER works by softening the glue so it can be wiped away. Several
applications may be necessary to completely remove all of the glue. To
remove from your fingers or other body parts, apply Z-7 DEBONDER directly on
the glue let it sit for a minute or so, rub the area with your finger, wipe
away the softened glue and apply additional Z-7 DEBONDER if needed. If your
fingers are glued together apply Z-7 DEBONDER all around the area glued, let
it work on the glue for a minute or so, then gently roll your fingers to
loosen the glue, apply more and continue working the glued area until yours
fingers separate. To remove from a surface, apply directly to the glue and
let sit for several minutes, wipe away the softened glue and repeat the
application if required. To weather your model apply debonder to a rag first
and gently wipe the painted areas you wish to look worn. Although Z-7
DEBONDER will work on most materials and paints, always test on samples for
compatibility. |
