Uses:

ZAP-O CA+ Is a true odorless CA that really does work. If you are one of the unfortunate ones that are sensitive to or have allergic type reactions to the odors given off when regular CA’s set, this is the glue for you. ZAP-O CA+ has the same gap filling properties as the regular ZAP-A-GAP CA+ but without the fumes. ZAP-O CA+ works great on balsa, plywood, bass wood and most other modeling and hobby materials. ZAP-O CA+ is also great for craft work when gluing foam shapes or various materials to foam products. If you are sensitive, the ZAP-O CA+ “No-more-tears” formula lets you work quickly without suffering. 

Helpful Hints: 

ZAP-O CA+ is a gap filling formula, however it will penetrate into porous woods and materials, therefore a couple of applications may be necessary to totally fill in a large gap or crack. To speed the cure time ZIP KICKER may be sprayed on the joint after the glue has been applied. Note: ZIP KICKER is not compatible with foam, so if you want to speed the cure time when gluing another material to a foam piece, treat the part you want to glue to the foam with ZIP KICKER AND LET IT DRY, apply the ZAP-O CA+ to the foam, then put the other piece on the foam part, hold the pieces in position for several seconds until the glue has cured. ZAP-O CA+ will take longer to cure when gluing foam to foam, tape or pin the pieces together and let cure. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. For critical applications test sample joints for designed strength requirements. Note: ZAP-O CA+ is a great alternative to those individuals that have reactions to the fumes given off by regular CA type glues. In rare cases some individuals may still have a reaction to ZAP-O CA+. If you do, discontinue use immediately, see your physician or allergist, you may be allergic to one or more of the chemicals common to all CA glues.