VMA-D260D DORNIER 60 SEMISCALE ARF ECS - MILITARY
	LANDING GEAR SPECIFICATIONS
	Type	Tail Dragger	Yes
	Type	Trike	No
	Nose Gear	Type	na
	Nose Gear	Wire diameter	na
	Nose Gear	Mounted to	na
	Nose Gear	Factory Bent	na
	Nose Gear	Shock Coil	na
	Nose Gear	Axle Points	na
	Nose Gear	Height axle to fuse	na
	Nose	Wheel Provided	na
	Nose	Wheel Diameter	na
	Nose	Wheel Treaded	na
	Nose Gear	Axle Provided	na
	Nose Gear	Collars Provided	na
	Nose Gear	Strut Provided	na
	Nose Gear	Strut Pre-installed	na
	Nose Gear	Wheel Pant	na
	Nose Gear	Retract Ready	na
	Nose Gear	Retract Possible	na
	Nose Gear	Steerable	na
	Nose Gear	Steers from Side	na
	Main Gear	Type	Wire	with	Struts &	Spats
	Main Gear	Wire diameter	0.157	in.	4	mm
	Main Gear	Mounted to	Fuselage
	Main Gear	Factory Bent	Yes
	Main Gear	Shock Coil	na
	Main Gear	Axles Point	Out
	Main Gear	Stance (wh<>wh)	12.75	in.	324	mm
	Main	Wheels Provided	Yes	2
	Main	Wheel Diameter	2.438	in.	62	mm
	Main	Wheels Treaded	Yes	Plain	Tread
	Main Gear	Axles Provided	na
	Main Gear	Collars Provided	Yes	2
	Main Gear	Struts Provided	Yes	2
	Main Gear	Struts Pre-installed	Yes	2
	Main Gear	Wheel Pants	na
	Main Gear	Retract Ready	na
	Main Gear	Retract Possible	na
	Tail Gear	Type	Connects	to	Rudder
	Tail Gear	Wire diameter	0.079	in.	2	mm
	Tail Gear	Mounted to	Fuselage
	Tail Gear	Factory Bent	Yes
	Tail Gear	Shock Coil	No
	Tail Gear	Axle Points	Left
	Tail Gear	Height axle to fuse	2.625	in.	67	mm
	Tail	Wheel Provided	Yes
	Tail	Wheel Diameter	1.1875	in.	30	mm
	Tail	Wheel Treaded	Yes
	Tail Gear	Axle Provided	Yes
	Tail Gear	Collars Provided	Yes	1
	Tail Gear	Strut Provided	na
	Tail Gear	Strut Pre-installed	na
	Tail Gear	Wheel Pant	na
	Tail Gear	Retract Ready	na
	Tail Gear	Retract Possible	na
	Tail Gear	Steerable	Yes
	Tail Gear	Steering Arm	Connects	to	Rudder
	NOTES:
	Accuracy of Dimensions provided here is within 3% in production
	"na" =	not applicable
	"?" =	estimated and yet to be confirmed