VMA-C360X CESSNA 182 45-60 SEMISCALE ARF ECS
	HORIZONTAL STABILIZER & ELEVATOR SPECIFICATIONS
	Location	Slot in Fuselage
	Span	Tip to Tip	22.625	in.	575	mm
	Area	Without Elevator	91	sq in	587	sq cm
	Airfoil	Slab
	Dihedral	na
	Polyhedral	na
	Taper	Leading Edge	Yes
	Taper	Trailing Edge	No
	Chord	At Root	4.5	in.	114	mm
	Chord	At tip end Elevator	3.5	in.	89	mm
	Thickness	Maximum	0.3125	in.	8	mm
	Material	Wood
	Method	Built Up
	Sheeted	Fully	No
	Ribs	Capped	Yes
	Covering	Factory Applied	Yes
	Covering	Type	PolyCote	ECS
	Covering	Heat Shrinkable	Yes	Med	Temp
	Covering	Repairable	Yes	Soft	Cloth	& Gun
	Elevators	Installed	Yes
	Elevators	Type	Split	2
	Elevators	Pinned in place	Yes
	Elevators	Hinges/Elevator	2
	Elevator	Hinges Metal Pin	Yes
	Elevator	Servo in Fuselage	Yes	1
	Elevator	Area	49	sq in	316	sq cm
	Elevators	Factory Joined	No	Stay	Split
	Horiz Stab	Struts	na
	Mounting	Use 30min Epoxy	and	Slot	in	Fuse
	Markings	Top	Rivets	&	Panel	Lines
	Markings	Bottom	Rivets	&	Panel	Lines
*	Color	Top vs Bottom	Similar
*	Color	Top Primary	White
*	Color	Top Trim	Silver
*	Color	Top Lines	Gray
*	Color	Top Rivets	Gray
*	Color	Bottom Primary	White
*	Color	Bottom Trim	Silver
*	Color	Bottom Lines	Gray
*	Color	Bottom Rivets	Gray
	NOTES:
	Accuracy of Dimensions provided here is within 3% in production
	"na" =	not applicable
	"?" =	estimated and yet to be confirmed
	Colors	May vary within and between production runs
		M Blue = Midnight Blue
		L Blue = Light Blue
		Blk = Black
	Area of Horiz Stab includes wing saddle area but not Elevator