| VMA-C360X CESSNA 182 45-60 SEMISCALE ARF ECS | |||||||
| FUSELAGE SPECIFICATIONS | |||||||
| Location | Above Wing | ||||||
| * | Length | See Notes Below | 49 | in. | 1245 | mm | |
| Material | Wood | ||||||
| Method | Built Up | ||||||
| Sheeted | Fully | Yes | |||||
| Shape | Body | Curved | |||||
| Shape | Turtle Deck | Curved | |||||
| Covering | Factory Applied | Yes | |||||
| Covering | Type | PolyCote | ECS | ||||
| Covering | Heat Shrinkable | Yes | Med | Temp | |||
| Covering | Repairable | Yes | Soft | Cloth | & Gun | ||
| Pushrods | Factory Installed | Yes | |||||
| Pushrods | Rudder | 1 | |||||
| Pushrods | Elevator | 2 | |||||
| Pushrods | Throttle | 1 | Two | Piece | |||
| Pushrods | Material | Steel | 2 mm | ||||
| Pushrods | Threaded | Yes | Both | Ends | |||
| Pushrods | In Guide Tubes | Yes | Nylon | ||||
| Pushrod | Exit Guides | Yes | |||||
| Rudder | Servo Required | Yes | 1 | Stand | 0 | ||
| Rudder | Servo Location | In | Tray | Centre | of Fuse | ||
| Elevator | Servo Required | Yes | 1 | Stand | 0 | ||
| Elevator | Servo Location | In | Tray | Centre | of Fuse | ||
| Throttle | Servo Required | Yes | 1 | Stand | 0 | ||
| Throttle | Servo Location | In | Tray | Centre | of Fuse | ||
| Servo Tray | Included | Yes | 0 | 0 | 0 | ||
| Servo Tray | Plastic | Yes | 0 | 0 | 0 | ||
| Servo Tray | Number of Servos | 3 | 0 | 0 | 0 | ||
| Servo Tray | Servo Function | Throttle | Elev | Rud | 0 | ||
| Servo Tray | Switch Mount | Yes | 0 | 0 | 0 | ||
| Servo Tray | Universal | Yes | 0 | 0 | 0 | ||
| Servo Tray | Adjustable | Yes | 0 | 0 | 0 | ||
| Servo Tray | Fits Stand Airtron | Yes | 0 | 0 | 0 | ||
| Servo Tray | Fits Stand Futaba | Yes | 0 | 0 | 0 | ||
| Servo Tray | Fits Stand JR | Yes | 0 | 0 | 0 | ||
| Servo Tray | Fits Stand HiTech | Yes | 0 | 0 | 0 | ||
| Servo Tray | Location | in | Centre | of | Fuse | ||
| Windshield | Factory Installed | Yes | |||||
| Pilot | Factory Installed | Yes | 1 | ||||
| Cockpit | Instrument Panel | Yes | |||||
| Cockpit | Liner | na | |||||
| Markings | Top | na | |||||
| Markings | Bottom | Rivets | and | Panel | Lines | ||
| Markings | Left Side | N763PE | |||||
| Markings | Right Side | N763PE | |||||
| * | Color | Top vs Bottom | Not | Same | |||
| * | Color | Top Main | Red | or | Green | & White | |
| * | Color | Top Trim | Black | ||||
| * | Color | Top Lines | Gray | ||||
| * | Color | Top Rivets | Gray | ||||
| * | Color | Bottom Main | White | ||||
| * | Color | Bottom Trim | na | ||||
| * | Color | Bottom Lines | Gray | ||||
| * | Color | Bottom Rivets | Gray | ||||
| * | Color | Side Main | White | ||||
| * | Color | Side Trim | Red | or | Green | & Black | |
| * | Color | Side Lines | Gray | ||||
| * | Color | Side Rivets | Gray | ||||
| NOTES: | |||||||
| Accuracy of Dimensions provided here is within 3% in production | |||||||
| "na" = | not applicable | ||||||
| "?" = | estimated and yet to be confirmed | ||||||
| Colors | May vary within and between production runs | ||||||
| M Blue = Midnight Blue | |||||||
| L Blue = Light Blue | |||||||
| Blk = Black | |||||||
| Length of Fuse is from Spinner back plate to trailing edge of | |||||||
| Rudder or Elevator whichever is longest | |||||||
| Length may vary slightly depending on engine. | |||||||
| Left and Right are relative to sitting in the cockpit and | |||||||
| looking forward towards the front of the fuselage. | |||||||