PART NUMBER |
VMA-[______?] |
HISTORICAL INFO |
|
- First Introduced |
[YYYYMMDD?] |
- Availability Status |
[Available?/YYYYMMDD?] |
- Supercedes |
[____/Brand New Release?] |
- Superceded by |
[?] |
- Change Log Highlights | [Click Here] |
RECOMMENDED FOR |
[Beginner?/Intermediate?Other?] |
[Great for _________?] |
|
HOURS TO FINISH |
[Eight?] |
WING |
|
- Location on Fuselage |
[Above?/Below?/Mid? fuselage] |
- Span |
______in |
- Area* |
_____sq in |
- Airfoil |
[Flat Bottom?Semi-Sym?/Sym?] |
- Taper |
[None?/swept LE&/orTE ___deg?] |
- Chord Size |
Root = ___in Tip = ____in |
- Thickness |
____ in |
- Construction |
[Wood - Built Up?] |
- Aileron Type |
[Strip w/Torq Rods?] |
- Pre-Hinged |
[Yes?] |
- Hinge Type |
[Real Hinge with Metal Pin?] |
- How Joined? |
[Wood Dihedral Brace |
& 2 Wood Align Pins |
|
& 30 minute Epoxy Glue?] |
|
- How Mount to Fuse? |
[Qty___ Nylon Bolts or ___Bands?] |
[Consumers Choice?] |
|
- Servo for Wing? |
[Yes 1 (not provided)?] |
- Servo Location |
[Centre Bottom of Wing?] |
- Second Wing Servo |
[Not provided for. Flaperons |
require user mods to wing?] |
|
- Color Top |
[?] |
- Color Bottom |
[?] |
- Color Pattern Top vs Bottom |
[Different?] |
FUSELAGE |
|
- Length* |
_____ in |
- Construction |
[Wood - Built Up?] |
- Pushrods |
[Preinstalled?] |
- Pushrod Material |
[Alum Tube w/thread end?] |
[Z-bend Rod for Throttle?] |
|
- Servo Tray |
[Preinstalled. Universal |
Adjustable for F/JR/Air/HiT?] |
|
- Color |
[?] |
- Servos Needed? |
[1 Throttle, 1 Elev, 1 Rudder?] |
- Servo Locations |
[Tray Centre Inside Fuse?] |
HORIZONTAL STAB/ELEV |
|
- Horiz Stab Area |
_____ in |
- Elevator Area |
_____ in |
- Construction |
[Wood - Built Up?] |
- Pre-Hinged |
[Yes?] |
- Hinge Type |
[Real Hinge with Metal Pin?] |
- Airfoil |
[Slab?/True Flying Surface. Not Slab?] |
- How Mount to Fuse? |
[Glue with Epoxy?] |
- Support Struts? |
[No. Not Required?] |
- Color Top |
[?] |
- Color Bottom |
[?] |
- Color Pattern Top vs Bottom |
[Same?/Different?] |
VERTICAL STAB/RUDDER |
|
- Vertical Stab Area |
_____ in |
- Rudder Area |
_____ in |
- Construction |
[Wood - Built Up?] |
- Pre-Hinged |
[Yes?] |
- Hinge Type |
{Real Hinge with Metal Pin?] |
- Airfoil |
[Slab?/True Flying Surface. Not Slab?] |
- How Mount to Fuse? |
[Glue with Epoxy?] |
- Color |
[?] |
- Color Pattern Left vs Right | [Same?/Different?] |
COVERING |
|
- "Sure Seal" |
Thermal Shrink Film |
- Self Adhesive |
Low Temperature |
- Patch Sheet Provided? |
[Yes. Main Color Sheet Provided?] |
- Patchable |
Yes. Use Patch Sheet Provided or |
aftermarket use Ultracote Plus or Ultracote Regular. |
|
- Ultracote Approx Color Match | [Click Here] |
LANDING GEAR |
[Trike or Tail Dragger |
-all parts supplied?] |
|
- Main Gear |
[Wire?/Aluminum ___mm |
- with 2 chromed steel axles?] |
|
- Main Wheels |
[Two of ___ in?] |
- Main Wheel Pants | [Yes?/No?] |
- Retract Ready? | [Yes?/No?] |
- Retracts that fit... | [na?/Name #?] |
- Nose Gear |
[Prebent Chrome Steel |
- with shock coil?] |
|
- Nose Wheel |
[One of ___ in?] |
- Nose Wheel Pants | [Yes?/No?] |
- Tail Wheel Assembly |
[na?/Provided. Prebent wire & |
bracket. User chooses to |
|
install.?] |
|
- Tail Wheel |
[na/One ___ in |
- with tail wheel assy?] |
|
COWL |
|
- included | [na?/Yes?] |
- material | [na?/Fibreglass?] |
- color | [?] |
- trim supplied | [na?/No?/Yes?] |
- trim applied by? | [Consumer?/Factory?] |
ENGINE |
Not included. See Options |
- 2 cycle |
[.___-.___ cu in?] |
- 4 cycle |
[.___-.___ cu in?] |
ENGINE MOUNT |
[Round?/T-bar Beams? Aluminum |
Clamp Type all pretapped?] |
|
- Firewall Predrilled for Mount? |
[No?/Yes?] |
- Predrilled orientation choices |
[na?/_____?] |
- Orientation Recommended |
[Up?/Inv?45 degrees from upright?] |
- Mount Installed? |
[Yes at ____degress?] |
- Power Module System |
[No Single Fixed Firewall?/Yes?] |
- Engine Lug Length - Max |
___ in |
- Engine Width - Max |
At Crankcase = ____ in |
- Beam Length |
____ in |
RADIO |
Not included. See Options |
- 4 channels |
[Need ____servos?] |
FUEL TANK |
|
- Type |
[Plastic?] |
- Size |
_____ oz |
- Clunk |
[Yes?] |
- Silicone Tubing |
[No?/Yes?] |
- Metal Tubing |
[2 - Prebent & fitted in stopper?] |
WEIGHT |
|
- Empty* - Assembled |
____ lbs / _____g |
- Flying Dry* - 2 cycle |
____ lbs / _____g |
- Flying Dry* - 4 cycle |
____ lbs / _____g |
WING LOADING |
|
- Empty* - Assembled |
____ lbs / _____g |
- Flying Dry* - 2 cycle |
____ lbs / _____g |
- Flying Dry* - 4 cycle |
____ lbs / _____g |
SET UP SPECS |
|
- CG Location |
____ in / ____ mm from LE |
- Aileron Throw |
____ in / ____ mm |
- Rudder Throw |
____ in / ____ mm |
- Elevator Throw |
____ in / ____ mm |
- Engine Thrust Line |
___ in / ____ mm from top of firewall |
- Engine Offset |
[None?] |
SHIPPING BOX |
|
- Cardboard |
[Brown?] |
- Size Length x Width x Depth |
__ x___ x___ in ___ x ___ x ___ mm |
- Length plus Girth |
___ in /___ mm |
- Volume |
___ cu ft / _____ cu m |
- Weight with kit |
____ lbs / _____g |
DISPLAY BOX |
|
- Cardboard |
[White?] |
- Protected by |
[Plastic Bag & Shipping Box?] |
- Size Length x Width x Depth |
__ x___ x___ in ___ x ___ x ___ mm |
- Length plus girth |
___ in /___ mm |
- Volume |
___ cu ft / _____ cu m |
- Weight with kit |
____ lbs / _____g |
- Label front colors |
Colors = |
__ x___ x___ in ___ x ___ x ___ mm |
|
- Label end panel |
Colors = |
__ x___ x___ in ___ x ___ x ___ mm |
|
* NOTES & LEGEND |
|
- na |
Not applicable this model |
- blank data or information | Not known at this time |
- [info?] | Estimated. Yet to be confirmed. |
- Area* of Wing |
Includes wing saddle area |
- Length* of Fuse |
From Spinner back plate |
to Trailing Edge of Rudder |
|
- Empty* Weight |
No radio, engine or fuel |
- Flying Dry* Weight |
With radio, engine. No fuel |
- Flying Dry* Loading |
With radio, engine. No fuel |