PART NUMBER |
VMA-N0014 |
HISTORICAL INFO |
|
- First Introduced |
Summer 1998 |
- Availability Status |
Available |
- Supercedes |
Brand New Release |
- Superceded by |
Brand New Release |
RECOMMENDED FOR |
Introductory Sport - Intermediate |
Great as a first low wing model. |
|
HOURS TO FINISH |
Eight |
WING |
|
- Location on Fuselage |
Below |
- Span |
63-3/4 in |
- Area* |
627 sq in |
- Airfoil |
[Semi-Sym?/Sym?] |
- Taper |
[None?/swept LE&/orTE ___deg?] |
- Chord Size |
Root = ___in Tip = ____in |
- Thickness |
____ in |
- Construction |
Wood - Built Up |
- Aileron Type |
Strip w/Torq Rods |
- Pre-Hinged |
Yes |
- Hinge Type |
Real Hinge with Metal Pin |
- How Joined? |
Wood Dihedral Brace |
& 2 Wood Align Pins |
|
& 30 minute Epoxy Glue |
|
- How Mount to Fuse? |
[Qty___] Nylon Bolts |
- Servo for Wing? |
Yes 1 (not provided) |
- Servo Location |
Centre Top of Wing |
- Second Wing Servo |
Not provided for. Flaperons |
require user mods to wing? |
|
- Color Top |
[?] |
- Color Bottom |
[?] |
- Color Pattern Top vs Bottom |
[Different?] |
FUSELAGE |
|
- Length* |
43-1/4" in |
- Construction |
Wood - Built Up |
- Pushrods |
Preinstalled |
- Pushrod Material |
Steel Rods w/thread end in plastic guide tubes. Z-bend Rod for Throttle & Nose Wheel |
- Servo Tray |
Preinstalled. Universal adjustable for F/JR/Air/HiT |
- Color |
White with Red, Blue & Black Trim |
- Servos Needed? |
1 Throttle, 1 Elev, 1 Rudder |
- Servo Locations |
Tray Centre Inside Fuse |
HORIZONTAL STAB/ELEV |
|
- Horiz Stab Area |
_____ in |
- Elevator Area |
_____ in |
- Construction |
Wood - Built Up |
- Pre-Hinged |
Yes |
- Hinge Type |
Real Hinge with Metal Pin |
- Airfoil |
Slab |
- How Mount to Fuse? |
[Glue with Epoxy?] |
- Support Struts? |
No. Not Required |
- Color Top |
[?] |
- Color Bottom |
[?] |
- Color Pattern Top vs Bottom |
[Same?/Different?] |
VERTICAL STAB/RUDDER |
|
- Vertical Stab Area |
_____ in |
- Rudder Area |
_____ in |
- Construction |
Wood - Built Up |
- Pre-Hinged |
Yes |
- Hinge Type |
Real Hinge with Metal Pin |
- Airfoil |
Slab |
- How Mount to Fuse? |
[Glue with Epoxy?] |
- Color |
[?] |
- Color Pattern Left vs Right | [Same?/Different?] |
COVERING |
|
- "Sure Seal" |
Thermal Shrink Film |
- Self Adhesive |
Low Temperature |
- Patchable |
Yes. Use patch sheet provided or aftermarket use Ultracote Plus or Ultracote Regular. |
- Patch Sheet Provided? |
Yes. White patch sheet provided. |
- Ultracote Approx Color Match | [Click Here] |
LANDING GEAR |
Tail Dragger. All parts supplied. |
- Main Gear |
Wire - Preformed chrome with shock loop |
- Stance - Between Wheels | [?] |
- Main Wheels |
Two of 2-7/16 in / 62 mm |
- Main Wheel Pants | na. |
- Retract Ready? | No |
- Retracts that fit... | na. Not Retract Ready. |
- Nose Gear |
Wire |
- Nose Wheel |
2-7/16 in / 62 mm |
- Tail Wheel Assembly | na. Trike gear. |
- Tail Wheel | na. Trike gear. |
COWL |
|
- included | na |
- material | na |
- color | na |
- trim supplied | na |
- trim applied by? | na |
ENGINE |
Not included. See Options |
- 2 cycle |
.40-.53 cu in?] |
- 4 cycle |
.48-.60 cu in?] |
ENGINE MOUNT |
Round Aluminum. Clamp Type all pretapped |
- Firewall Predrilled for Mount? |
Yes |
- Predrilled orientation choices |
na |
- Orientation Recommended |
45 degrees from upright |
- Mount Installed? |
Yes at 45 degrees from vertical |
- Engine Lug Length - Max |
1-3/32 in. |
- Engine Width - Max |
At Crankcase = 1-1/2 in |
- Beam Length |
2-1/2 in |
- Power Module System |
No Single Fixed Firewall |
RADIO |
Not included. See Options |
- 4 channels |
Need four servos |
SERVO TRAY | Preinstalled. Universal adjustable for F/JR/Air/HiT |
- Picture of Servo Tray with universally adjustable sliders highlighted in purple shading. Adjust to fit length of Futaba, Airtronics, JR or Hi-Tech standard servo. Tighten screws to lock slider into position. | |
More Pictures of Servo Tray & Linkages | |
FUEL TANK |
|
- Type |
Plastic |
- Size |
10.5 oz / 300cc |
- Clunk |
Yes |
- Silicone Tubing |
No |
- Metal Tubing |
2 - Prebent & fitted in stopper |
WEIGHT |
|
- Empty* - Assembled |
____ lbs / _____g |
- Flying Dry* - 2 cycle |
____ lbs / _____g |
- Flying Dry* - 4 cycle |
____ lbs / _____g |
WING LOADING |
|
- Empty* - Assembled |
____ lbs / _____g |
- Flying Dry* - 2 cycle |
____ lbs / _____g |
- Flying Dry* - 4 cycle |
____ lbs / _____g |
SET UP SPECS |
|
- CG Location |
____ in / ____ mm from LE |
- Aileron Throw |
____ in / ____ mm |
- Rudder Throw |
____ in / ____ mm |
- Elevator Throw |
____ in / ____ mm |
- Engine Thrust Line |
___ in / ____ mm from top of firewall |
- Engine Offset |
[None?] |
SHIPPING BOX |
|
- Cardboard |
Brown |
- Size Length x Width x Depth |
__ x___ x___ in ___ x ___ x ___ mm |
- Length plus Girth |
___ in /___ mm |
- Volume |
___ cu ft / _____ cu m |
- Weight with kit |
____ lbs / _____g |
DISPLAY BOX |
|
- Cardboard |
White |
- Protected by |
Plastic Bag & Shipping Box |
- Size Length x Width x Depth |
__ x___ x___ in ___ x ___ x ___ mm |
- Length plus girth |
___ in /___ mm |
- Volume |
___ cu ft / _____ cu m |
- Weight with kit |
____ lbs / _____g |
- Label front colors |
Colors = |
- Label front size | __ x___ x___ in ___ x ___ x ___ mm |
- Label front picture | |
- Label end panel |
Colors = |
- Label end panel size | __ x___ x___ in ___ x ___ x ___ mm |
- Label end panel picture | |
* NOTES & LEGEND |
|
- na |
Not applicable this model |
- blank data or information | Not known at this time |
- [info?] | Estimated. Yet to be confirmed. |
- Area* of Wing |
Includes wing saddle area |
- Length* of Fuse |
From Spinner back plate |
to Trailing Edge of Rudder |
|
- Empty* Weight |
No radio, engine or fuel |
- Flying Dry* Weight |
With radio, engine. No fuel |
- Flying Dry* Loading |
With radio, engine. No fuel |