The VMAR IN COWL "Pitt's Style" MUFFLER - nothing beats it!
If you've ever needed a low cost high performance Pitt's Style muffler for your .61-.76 size engine... this is it! Our muffler fits our VMAX .61PRO and most popular .61-.76 engines (see dimensions for compatibility). Better yet it weighs less than 3.5 oz and has been tuned to minimize RPM losses commonly found when using Pitts Mufflers. Testing on our VMAX .61PRO engine demonstrated only minimal RPM loss when compared to the VMAX straight factory muffler!!
Quality Engineered by Modelers for Modelers!
Only from VMAR Manufacturing... setting the standard in Affordable RC products.
|Description:||IN COWL "Pitt's Style" MUFFLER|
|Engine Range:||.60 - .91 cu. in.|
|Fits:||VMAX 61PRO, and|
|VMAX 90PRO, and|
|Other Popular .60-.91 Engines compatible with specifications listed below.|
|Booking Orders as of:||20050226|
|Shipping Orders as of:||20050226|
Specifications within 3% as of 20050305
|A = Threaded Hole:||.1378 in. (3.5 mm)|
|B = Port Height:||.354 in. (9 mm)|
|C = Flange Height:||.649 in. (16.5 mm)|
|D = Flange Width:||1.968 in. (50 mm)|
|E = Mounting Holes Center to Center:||1.653 in. (42 mm)|
|F = Port Width:||1.083 in. (27.5 mm)|
|G = Exhaust Inside Diameter:||.256 in. (6.5 mm)|
|H = Exhaust (Tube) Separation Center to Center:||1.280 in. (32.5 mm)|
|I = Overall Length:||4.843 in. (123 mm)|
|J = Exhaust (Tube) Distance from End:||1.338 in. (34 mm)|
|K = Barrel Diameter:||1.614 in. (41 mm)|
|Overall Width with Flange & Exhaust Tubes:||3.149 in. (80 mm)|
|L = Exhaust (Tube) Length:||1.496 in. (38 mm)|
|Weight:||4.33 oz (110 g)|
|©Copyright. All rights reserved.|
|Prices, Specifications, Features and Availability subject to change without notice|
|Production Colors and Graphic Schemas may differ from that shown.|