VMA-D260D DORNIER 60 SEMISCALE ARF ECS - MILITARY
	WING SPECIFICATIONS
	Location	Below Fuselage					box says
	Span	Tip to Tip	67.5	in.	1715	mm	67.75
	Area	Includes Saddle	720	sq in	4646	sq cm	700
	Airfoil	Semi-Symmetrical
	Dihedral	At Centre	No
	Polyhedral	na	No
	Taper	Leading Edge	No
	Taper	Trailing Edge	No
	Chord	At Root	10	in.	254	mm
	Chord	At tip end Aileron	10.875	in.	276	mm
	Thickness	Maximum	1.875	in.	48	mm
	Material	Wood
	Method	Built Up
	Sheeted	Centre Section	19	in.	483	mm
	Ribs	Capped	Yes
	Covering	Factory Applied	Yes
	Covering	Type	PolyCote	ECS
	Covering	Heat Shrinkable	Yes	Med	Temp
	Covering	Repairable	Yes	w/Heat	Iron	& Gun
	Ailerons	Installed	Yes
	Aileron	Type	Strip	2
	Ailerons	Hinges Pinned	Yes
	Aileron	Hinges/Aileron	3
	Aileron	Hinges Metal Pin	No	Super	Strong	Mylar
	Aileron	Servo Required	Yes	2	Stand
	Aileron	Servo Location	Out	board	in	wing
	Aileron	Servo Rails	In	Cover	Plate
	Aileron	Servo Cover Plate	Yes	2	0
	Ailerons	Flaperon Ready	Yes	with	Comp	Radio
	Flaps	Installed	Yes
	Flaps	Type	Strip	2
	Flaps	Hinges Pinned	Yes
	Flaps	Hinges/Flap	3
	Flaps	Hinges Metal Pin	No	Super	Strong	Mylar
	Joining	Wood Spar Joiner	Yes	1	12x1	x7/32"
	Joining	Wood Dowels	Yes	2
	Joining	Use 30min Epoxy	Yes
	Mounting	Nylon Bolts	Yes	2	Front
	Mounting	LE Wood Dowel	Yes	2	Rear
	Markings	Top	Rivets	& Iron	Cross
	Markings	Bottom	Rivets	& Iron	Cross	& "HEER"
*	Color	Top vs Bottom	Different
*	Color	Top Main	Gray Blue
*	Color	Top Trim	Green	and	Orange	Tips
*	Color	Top Lines	White
*	Color	Top Rivets	White
*	Color	Bottom Main	Sky Blue
*	Color	Bottom Trim	White	Letters	Orange	Tips
*	Color	Bottom Lines	Gray
*	Color	Bottom Rivets	Gray
	NOTES:
	Accuracy of Dimensions provided here is within 3% in production
	"na" =	not applicable
	"?" =	estimated and yet to be confirmed
	Colors	May vary within and between production runs
		M Blue = Midnight Blue
		L Blue = Light Blue
		Blk = Black
		Red = Flame Red
	Area of Wing includes wing saddle area, ailerons & flaps etc