VMA-D260D DORNIER 60 SEMISCALE ARF ECS - MILITARY
	HORIZONTAL STABILIZER & ELEVATOR SPECIFICATIONS
	Location	Slot in Fuselage
	Span	Tip to Tip	22.1875	in.	564	mm
	Area	Without Elevator	85.9766	sq in	555	sq cm
	Airfoil	Slab
	Dihedral	na
	Polyhedral	na
	Taper	Leading Edge	No
	Taper	Trailing Edge	No
	Chord	At Root	5.625	in.	143	mm
	Chord	At tip end Elevator	5.625	in.	143	mm
	Thickness	Maximum	0.3125	in.	8	mm
	Material	Wood
	Method	Built Up
	Sheeted	Fully	No
	Ribs	Capped	Yes
	Covering	Factory Applied	Yes
	Covering	Type	PolyCote	ECS
	Covering	Heat Shrinkable	Yes	Med	Temp
	Covering	Repairable	Yes	w/Heat	Iron	& Gun
	Elevators	Installed	Yes
	Elevators	Type	Split	2
	Elevators	Hinges Pinned	Yes
	Elevators	Hinges/Elevator	3
	Elevator	Hinges Metal Pin	No	Super	Strong	Mylar
	Elevator	Servo in Fuselage	Yes	1
	Elevator	Area	40.3125	sq in	260	sq cm
	Elevators	Factory Joined	No	Stay	Split
	Horiz Stab	Struts	na
	Mounting	Use 30min Epoxy	and	Slot	in	Fuse
	Markings	Top	Rivets	&	Panel	Lines
	Markings	Bottom	Rivets	&	Panel	Lines
*	Color	Top vs Bottom	Different
*	Color	Top Primary	Gray Blue
*	Color	Top Trim	Green
*	Color	Top Lines	White
*	Color	Top Rivets	White
*	Color	Bottom Primary	Sky Blue
*	Color	Bottom Trim	na
*	Color	Bottom Lines	Gray
*	Color	Bottom Rivets	Gray
	NOTES:
	Accuracy of Dimensions provided here is within 3% in production
	"na" =	not applicable
	"?" =	estimated and yet to be confirmed
	Colors	May vary within and between production runs
		M Blue = Midnight Blue
		L Blue = Light Blue
		Blk = Black
	Area of Horiz Stab includes wing saddle area but not Elevator