VMA-C360X CESSNA 182 45-60 SEMISCALE ARF ECS
	WING SPECIFICATIONS
	Location	Below Fuselage
	Span	Tip to Tip	63.5	in.	1613	mm
	Area	Includes Saddle	589	sq in	3800	sq cm
	Airfoil	Semi-Symmetrical
	Dihedral	At Centre	No
	Polyhedral	na	No
	Taper	Leading Edge	Yes
	Taper	Trailing Edge	Yes
	Chord	At Root	10	in.	254	mm
	Chord	At tip end Aileron	7.5	in.	191	mm
	Thickness	Maximum	1.625	in.	41	mm
	Material	Wood
	Method	Built Up
	Sheeted	Centre Section	33	in.	838	mm
	Ribs	Capped	Yes
	Covering	Factory Applied	Yes
	Covering	Type	PolyCote	ECS
	Covering	Heat Shrinkable	Yes	Med	Temp
	Covering	Repairable	Yes	Soft	Cloth	& Gun
	Ailerons	Installed	Yes
	Aileron	Type	Strip	2
	Ailerons	Pinned in place	Yes
	Aileron	Hinges/Aileron	3
	Aileron	Hinges Metal Pin	Yes
	Aileron	Servo Required	Yes	2	Stand
	Aileron	Servo Location	Out	board	in	wing
	Aileron	Servo Rails	In	Place	Yes
	Aileron	Servo Cover Plate	Yes	2	0
	Ailerons	Flaperon Ready	Yes	with	Comp	Radio
	Flaps	Installed	No
	Flaps	Type	na
	Flaps	Pinned in place	na
	Flaps	Hinges/Flap	na
	Flaps	Hinges Metal Pin	na
	Joining	Wood Spar Joiner	Yes	1
	Joining	Wood Dowels	Yes	2
	Joining	Use 30min Epoxy	Yes
	Mounting	Nylon Bolts	Yes	2
	Mounting	LE Wood Dowel	Yes	2
	Markings	Top	Rivets	&	Lines
	Markings	Bottom	Rivets	&	Lines
*	Color	Top vs Bottom	Similar
*	Color	Top Main	White
*	Color	Top Trim	Red	or	Green	& Black
*	Color	Top Lines	Gray
*	Color	Top Rivets	Gray
*	Color	Bottom Main	White
*	Color	Bottom Trim	Red	or	Green	& Black
*	Color	Bottom Lines	Gray
*	Color	Bottom Rivets	Gray
	NOTES:
	Accuracy of Dimensions provided here is within 3% in production
	"na" =	not applicable
	"?" =	estimated and yet to be confirmed
	Colors	May vary within and between production runs
		M Blue = Midnight Blue
		L Blue = Light Blue
		Blk = Black
		Red = Flame Red
	Area of Wing includes wing saddle area, ailerons & flaps etc