VMA-C260U F4U CORSAIR 60 SEMI SCALE ARF - USMC
VERTICAL STABILIZER & RUDDER SPECIFICATIONS
Location Slot in Fuselage        
Height Fuse to Top Tip 6.125 in. 156  mm
Area Without Rudder 31 sq in 200  sq cm
Airfoil Slab        
Dihedral na        
Polyhedral na        
Taper Leading Edge Yes      
Taper Trailing Edge No      
Chord At Root 3.875  in. 98  mm
Chord At tip end Rudder 2.875  in. 73  mm
Thickness Maximum 0.313  in. 8  mm
Material Wood        
Method Built Up        
Sheeted Fully Yes      
Ribs Capped na      
Covering Factory Applied Yes      
Covering Type Film      
Covering Heat Shrinkable Yes Low Temp  
Covering Repairable Yes Soft Cloth & Gun
Rudder Installed Yes      
Rudder Type Slab 1    
Rudder Pinned in place Yes      
Rudder Hinges/Elevator 2      
Rudder Hinges Metal Pin Yes      
Rudder Servo in Fuselage Yes 1    
Rudder Area 26 in. 660  mm
Rudder Tail Wheel Driver Yes      
Vert Stab Struts na      
Mounting Use 30min Epoxy and Slot in Fuse
Markings Left "WF"      
Markings Right "WF"      
* Color Left vs Right Same      
* Color Left Primary M Blue      
* Color Left Trim White      
* Color Left Lines Gray      
* Color Left Rivets Gray      
* Color Right Primary M Blue      
* Color Right Trim White      
* Color Right Lines Gray      
* Color Right Rivets Gray      
NOTES:
Accuracy of Dimensions provided here is within 3% in production
"na" =  not applicable
"?" = estimated and yet to be confirmed
Colors May vary within and between production runs
M Blue = Midnight Blue
L Blue = Light Blue
Blk = Black
Area of Vertical Stab does not include Rudder
Copyright Richmond RC Supply Ltd 2002 02 17