1 | Part#: | VMA-T210XPMV |
20110224 00009781 |
2 | Dimensions: | na |
20070504 00009782 |
3 | Terminology: | na |
20070504 00009783 |
4 | Motor (Electric) Mount General Information 1: | na |
20070504 00009784 |
5 | Motor (Electric) Mount General Information 2: | na |
20070504 00009785 |
6 | Motor Mount Type: | Flat vertical surface to which backing plate of motor is attached |
20070504 00009786 |
7 | Motor Mount Material: | Wood |
20070504 00009787 |
8 | Motor Mount Attaches to Firewall with: | na |
20070504 00009788 |
9 | Motor Mount Retains Motor backing plate with: | Machine Bolts, Nuts and Washers |
20070504 00009789 |
10 | Motor Mount Drilling Required: | No if using motor backing plate with either of the two most common configurations. (Backing plates of VMAX motors, VMAX Power Packs & VMAX Power Modules mount without drilling) |
20070504 00009790 |
11 | Motor Mount Drilling Optional: | Yes. Drilling can be done to mount motors with backing plates that have non-standard configurations |
20070504 00009791 |
12 | Motor Mounting Bolt Type Recommended: | Black Allen Head Machine Bolt |
20070504 00009792 |
13 | Motor Mount Length Max using factory cowl: | .00 in. (.00 mm) |
20070504 00009793 |
14 | Motor Mount Max Motor Lug Hole Spacing if using 4mm bolts through lugs into existing threaded holes in T-beams but not using clamps: | .00 in. (.00 mm) |
20070504 00009794 |
15 | Motor Mount T-Bar Beam Length Max: | .00 in. (.00 mm) |
20070504 00009795 |
16 | Motor Mount More Information: | na |
20070504 00009796 |
17 | Motor (Electric) Mount More Information 1: | na |
20070504 00009797 |
18 | Motor (Electric) Mount More Information 2: | na |
20070504 00009798 |
19 | Motor (Electric) Mount More Information 3: | na |
20070504 00009799 |