1 | Part#: | VMA-T210WTV |
20070428 00010637 |
2 | Source Data - Wing Area: | 429.37 sq in. (2770.12 sq cm) |
20070428 00010638 |
3 | Source Data - Wing Area without Saddle: | 429.37 sq in. (2770.12 sq cm) |
20070428 00010639 |
4 | Source Data - Horiz Stabilizer Area: | .00 sq in. (.00 sq cm) |
20070428 00010640 |
5 | Source Data - Horiz Stabilizer Area without Saddle: | .00 sq in. (.00 sq cm) |
20070428 00010641 |
6 | Source Data - Horiz Stabilizer Elevator Area: | .00 sq in. (.00 sq cm) |
20070428 00010642 |
7 | Dimensions: | Please See Note |
20070425 00010643 |
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments. | |||
8 | Terminology: | Please See Note |
20070425 00010644 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
9 | Vertical Stabilizer General Information 1: | na |
20070425 00010645 |
10 | Vertical Stabilizer General Information 2: | na |
20070425 00010646 |
11 | Vertical Stabilizer Location: | Vertical Slot in Top of aft end of Fuselage |
20070425 00010647 |
12 | Vertical Stabilizer Quantity: | 1 |
20070425 00010648 |
13 | Vertical Stabilizer Height Fuse to End Of Tip: | .00 in. (.00 mm) |
20070425 00010649 |
14 | Vertical Stabilizer Height (effective): | .00 in. (.00 mm) |
20070425 00010650 |
15 | Vertical Stabilizer Chord Maximum: | .00 in. (.00 mm) |
20070425 00010651 |
16 | Vertical Stabilizer Chord at tip end of Rudder: | .00 in. (.00 mm) |
20070425 00010652 |
17 | Vertical Stabilizer Chord (effective): | .00 in. (.00 mm) |
20070425 00010653 |
18 | Vertical Stabilizer Area: | .00 sq in. (.00 sq cm) |
20070425 00010654 |
19 | Vertical Stabilizer Area relative to Wing Area: | .00 % |
20070428 00010655 |
20 | Vertical Stabilizer Area relative to Wing Area without wing saddle: | .00 % |
20070428 00010656 |
21 | Vertical Stabilizer Airfoil Shape: | Semi-Symmetrical |
20070426 00010657 |
22 | Vertical Stabilizer Thickness Maximum: | .000 in. (.00 mm) |
20070425 00010658 |
23 | Vertical Stabilizer Taper along Leading Edge: | na |
20070425 00010659 |
24 | Vertical Stabilizer Taper along Trailing Edge: | na |
20070425 00010660 |
25 | Vertical Stabilizer Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070425 00010661 |
26 | Vertical Stabilizer Construction Method: | Built Up |
20070425 00010662 |
27 | Vertical Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070425 00010663 |
28 | Vertical Stabilizer Sheeted Fully: | na |
20070425 00010664 |
29 | Vertical Stabilizer Sheeted Leading Edge: | .000 in. (0 mm) |
20070425 00010665 |
30 | Vertical Stabilizer Sheeted Trailing Edge: | .000 in. (0 mm) |
20070425 00010666 |
31 | Vertical Stabilizer Ribs Capped: | na |
20070425 00010667 |
32 | Vertical Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070425 00010668 |
33 | Vertical Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070425 00010669 |
34 | Vertical Stabilizer Requires Struts: | No |
20070425 00010670 |
35 | Vertical Stabilizer Rudder Factory Installed: | Yes |
20070425 00010671 |
36 | Vertical Stabilizer Rudder Quantity: | 1 (i.e. not split, not dual rudders) |
20070425 00010672 |
37 | Vertical Stabilizer Rudder Length (effective): | .00 in. (0 mm) |
20070425 00010673 |
Vertical Stabilizer Rudder Length is ___ mm at the hinge line. The Rudder Length is ___ mm at the trailing edge. | |||
38 | Vertical Stabilizer Rudder Chord (effective): | .00 in. (0 mm) |
20070425 00010674 |
The Vertical Stablizer Rudder Chord is ___ mm at the tip end. The Rudder Chord is ___ mm at the root end. | |||
39 | Vertical Stabilizer Rudder Area: | .00 sq in. (.00 sq cm) |
20070425 00010675 |
40 | Vertical Stabilizer Rudder Area relative to Wing Area: | .00 % |
20070428 00010676 |
41 | Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle: | .00 % |
20070428 00010677 |
42 | Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area: | .0 % |
20070425 00010678 |
43 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area: | .0 % |
20070428 00010679 |
44 | Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle: | .0 % |
20070428 00010680 |
45 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area: | .0 % |
20070428 00010681 |
46 | Vertical Stabilizer Rudder Hinges per Rudder: | na |
20070425 00010682 |
47 | Vertical Stabilizer Rudder Hinge Type: | Flexible Live Low Gap |
20070425 00010683 |
48 | Vertical Stabilizer Rudder Hinge Material: | Proprietary Super Strong |
20070425 00010684 |
49 | Vertical Stabilizer Rudder Hinge Adhesive: | Cyanoacrylate |
20070425 00010685 |
50 | Vertical Stabilizer Rudder Hinges Pinned: | Yes |
20070425 00010686 |
51 | Vertical Stabilizer Rudder Servo Required: | Yes 1 Standard |
20070425 00010687 |
52 | Vertical Stabilizer Rudder Servo Location: | Exterior of left side of fuselage near the tail |
20070425 00010688 |
53 | Vertical Stabilizer Rudder Servo Mounting Method: | Tray |
20070425 00010689 |
54 | Vertical Stabilizer Rudder Servo Cover Plate: | na |
20070425 00010690 |
55 | Vertical Stabilizer Rudder Servo Wiring Tube: | na |
20070425 00010691 |
56 | Vertical Stabilizer Hatches: | na |
20070425 00010692 |
57 | Vertical Stabilizer Rudder Actuation Rod: | na |
20070425 00010693 |
58 | Vertical Stabilizer Color Left Schema: | na |
20070425 00010694 |
59 | Vertical Stabilizer Color Left Main: | na |
20070425 00010695 |
60 | Vertical Stabilizer Color Left Trim: | na |
20070425 00010696 |
61 | Vertical Stabilizer Color Left Lines: | na |
20070425 00010697 |
62 | Vertical Stabilizer Color Left Rivets: | na |
20070425 00010698 |
63 | Vertical Stabilizer Color Left vs Right: | na |
20070425 00010699 |
64 | Vertical Stabilizer Color Right Schema: | na |
20070425 00010700 |
65 | Vertical Stabilizer Color Right Main: | na |
20070425 00010701 |
66 | Vertical Stabilizer Color Right Trim: | na |
20070425 00010702 |
67 | Vertical Stabilizer Color Right Lines: | na |
20070425 00010703 |
68 | Vertical Stabilizer Color Right Rivets: | na |
20070425 00010704 |
69 | Vertical Stabilizer Weight: | .000 lbs (.00 g) |
20070425 00010705 |
70 | Vertical Stabilizer More Information 1: | na |
20070425 00010706 |
71 | Vertical Stabilizer More Information 2: | na |
20070425 00010707 |
72 | Vertical Stabilizer More Information 3: | na |
20070425 00010708 |