| 1 | Part#: | VMA-T210WTH |
20070428 00010563 |
| 2 | Source Data - Wing Area: | 429.37 sq in. (2770.12 sq cm) |
20070428 00010564 |
| 3 | Source Data - Wing Area without Saddle: | 429.37 sq in. (2770.12 sq cm) |
20070428 00010565 |
| 4 | Dimensions: | Please See Note |
20070425 00010567 |
| The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
| 5 | Terminology: | Please See Note |
20070425 00010568 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 6 | Horiz Stabilizer General Information 1: | na |
20070425 00010569 |
| 7 | Horiz Stabilizer General Information 2: | na |
20070425 00010570 |
| 8 | Horiz Stabilizer Location: | Horizontal Stabilizer slot in aft end of Fuselage |
20070425 00010571 |
| 9 | Horiz Stabilizer Span Tip to Tip: | .00 in. (.00 mm) |
20070425 00010572 |
| 10 | Horiz Stabilizer Span (effective): | .00 in. (.00 mm) |
20070425 00010573 |
| 11 | Horiz Stabilizer Chord Maximum: | .00 in. (.00 mm) |
20070425 00010574 |
| 12 | Horiz Stabilizer Chord at outboard end of Elevator: | .00 in. (.00 mm) |
20070425 00010575 |
| 13 | Horiz Stabilizer Chord (effective): | .00 in. (.00 mm) |
20070425 00010576 |
| 14 | Horiz Stabilizer Area: | .00 sq in. (.00 sq cm) |
20070425 00010577 |
| 15 | Horiz Stabilizer Area relative to Wing Area: | .00 % |
20070428 00010578 |
| 16 | Horiz Stabilizer Length of Saddle: | .00 in. (.00 mm) |
20070425 00010579 |
| 17 | Horiz Stabilizer Width of Saddle: | .00 in. (.00 mm) |
20070425 00010580 |
| 18 | Horiz Stabilizer Area of Saddle: | .00 sq in. (.00 sq cm) |
20070425 00010581 |
| 19 | Horiz Stabilizer Area without Saddle: | .00 sq in. (.00 sq cm) |
20070425 00010582 |
| 20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | .00 % |
20070506 00010583 |
| 21 | Horiz Stabilizer Airfoil Shape: | Slab |
20070425 00010584 |
| 22 | Horiz Stabilizer Thickness Maximum: | .000 in. (.00 mm) |
20070425 00010585 |
| 23 | Horiz Stabilizer Anhedral: | na |
20070425 00010586 |
| 24 | Horiz Stabilizer Dihedral at Center: | na |
20070425 00010587 |
| 25 | Horiz Stabilizer Polyhedral: | na |
20070425 00010588 |
| 26 | Horiz Stabilizer Taper along Leading Edge: | na |
20070425 00010589 |
| 27 | Horiz Stabilizer Taper along Trailing Edge: | na |
20070425 00010590 |
| 28 | Horiz Stabilizer Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070425 00010591 |
| 29 | Horiz Stabilizer Construction Method: | Built Up |
20070425 00010592 |
| 30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070425 00010593 |
| 31 | Horiz Stabilizer Sheeted Fully: | No |
20070425 00010594 |
| 32 | Horiz Stabilizer Sheeted Center Section: | .00 in. (0 mm) |
20070425 00010595 |
| 33 | Horiz Stabilizer Sheeted Leading Edge (effective): | .00 in. (0 mm) |
20070425 00010596 |
| 34 | Horiz Stabilizer Sheeted Trailing Edge: | .000 in. (0 mm) |
20070425 00010597 |
| 35 | Horiz Stabilizer Ribs Capped: | Yes |
20070425 00010598 |
| 36 | Horiz Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070425 00010599 |
| 37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070425 00010600 |
| 38 | Horiz Stabilizer Requires Struts: | No |
20070425 00010601 |
| 39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070425 00010602 |
| 40 | Horiz Stabilizer Elevator Quantity: | 1 (i.e. not split into left & right halves) |
20070425 00010603 |
| 41 | Horiz Stabilizer Elevator Length (effective): | .00 in. (.00 mm) |
20070425 00010604 |
| Horiz Stablizer Elevator Length is ___ mm at the hinge line (closest to the wing). The Elevator Length is ___ mm at the trailing edge. | |||
| 42 | Horiz Stabilizer Elevator Chord (effective): | .00 in. (0 mm) |
20070425 00010605 |
| Horiz Stabilizer Elevator Chord varies from ___ mm at the inboard end (closest to the fuselage) to ___ mm at the outboard end. | |||
| 43 | Horiz Stabilizer Elevator Area: | .00 sq in. (.00 sq cm) |
20070425 00010606 |
| 44 | Horiz Stabilizer Elevator Area relative to Wing Area: | .00 % |
20070428 00010607 |
| 45 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | .00 % |
20070428 00010608 |
| 46 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | .0 % |
20070425 00010609 |
| 47 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | .0 % |
20070425 00010610 |
| 48 | Horiz Stabilizer Elevator Hinges per Elevator: | na |
20070425 00010611 |
| 49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070425 00010612 |
| 50 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070425 00010613 |
| 51 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070425 00010614 |
| 52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070425 00010615 |
| 53 | Horiz Stabilizer Elevator Servo Required: | Yes 1 Sub-Micro |
20070425 00010616 |
| 54 | Horiz Stabilizer Elevator Servo Location: | Exterior right side of fuselage near the tail |
20070425 00010617 |
| 55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070425 00010618 |
| 56 | Horiz Stabilizer Elevator Servo Cover Plate: | na |
20070425 00010619 |
| 57 | Horiz Stabilizer Elevator Servo Wiring Tube: | na |
20070425 00010620 |
| 58 | Horiz Stabilizer Hatches: | na |
20070425 00010621 |
| 59 | Horiz Stabilizer Color Top Schema: | na |
20070425 00010622 |
| 60 | Horiz Stabilizer Color Top Main: | na |
20070425 00010623 |
| 61 | Horiz Stabilizer Color Top Trim: | na |
20070425 00010624 |
| 62 | Horiz Stabilizer Color Top Lines: | na |
20070425 00010625 |
| 63 | Horiz Stabilizer Color Top Rivets: | na |
20070425 00010626 |
| 64 | Horiz Stabilizer Color Top vs Bottom: | na |
20070425 00010627 |
| 65 | Horiz Stabilizer Color Bottom Schema: | na |
20070425 00010628 |
| 66 | Horiz Stabilizer Color Bottom Main: | na |
20070425 00010629 |
| 67 | Horiz Stabilizer Color Bottom Trim: | na |
20070425 00010630 |
| 68 | Horiz Stabilizer Color Bottom Lines: | na |
20070425 00010631 |
| 69 | Horiz Stabilizer Color Bottom Rivets: | na |
20070425 00010632 |
| 70 | Horiz Stabilizer Weight: | .000 lbs (.00 g) |
20070425 00010633 |
| 71 | Horiz Stabilizer More Information 1: | na |
20070425 00010634 |
| 72 | Horiz Stabilizer More Information 2: | na |
20070425 00010635 |
| 73 | Horiz Stabilizer More Information 3: | na |
20070425 00010636 |