| 1 | Part#: | VMA-F690NTH |
20070222 00004111 |
| 2 | Source Data - Wing Area: | 740.34 sq in. (4776.39 sq cm) |
20070111 00004112 |
| 3 | Source Data - Wing Area without Saddle: | 573.05 sq in. (3697.07 sq cm) |
20070128 00004113 |
| 4 | Dimensions: | Please See Note |
20070111 00004114 |
| The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
| 5 | Terminology: | Please See Note |
20070112 00004115 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 6 | Horiz Stabilizer General Information 1: | na |
20070111 00004116 |
| 7 | Horiz Stabilizer General Information 2: | na |
20070111 00004117 |
| 8 | Horiz Stabilizer Location: | Horizontal Stabilizer slot in aft end of Fuselage |
20070111 00004118 |
| 9 | Horiz Stabilizer Span Tip to Tip: | 32.48 in. (825 mm) |
20070111 00004119 |
| 10 | Horiz Stabilizer Span (effective): | 32.32 in. (821 mm) |
20070111 00004120 |
| 11 | Horiz Stabilizer Chord Maximum: | 7.76 in. (197 mm) |
20070111 00004121 |
| 12 | Horiz Stabilizer Chord at outboard end of Elevator: | 4.80 in. (122 mm) |
20070111 00004122 |
| 13 | Horiz Stabilizer Chord (effective): | 6.28 in. (160 mm) |
20070111 00004123 |
| 14 | Horiz Stabilizer Area: | 202.97 sq in. (1309.50 sq cm) |
20070111 00004124 |
| 15 | Horiz Stabilizer Area relative to Wing Area: | 27.42 % |
20070114 00004125 |
| 16 | Horiz Stabilizer Width of Saddle: | 9.02 in. (229 mm) |
20070111 00004184 |
| 17 | Horiz Stabilizer Length of Saddle: | 7.76 in. (197 mm) |
20070111 00004187 |
| 18 | Horiz Stabilizer Area of Saddle: | 69.93 sq in. (451 sq cm) |
20070111 00004126 |
| 19 | Horiz Stabilizer Area without Saddle: | 133.05 sq in. (858.37 sq cm) |
20070111 00004127 |
| 20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 23.22 % |
20070128 00004128 |
| 21 | Horiz Stabilizer Airfoil Shape: | Slab |
20070111 00004129 |
| 22 | Horiz Stabilizer Thickness Maximum: | .394 in. (10.0 mm) |
20070111 00004130 |
| 23 | Horiz Stabilizer Anhedral: | na |
20070111 00004131 |
| 24 | Horiz Stabilizer Dihedral at Center: | na |
20070111 00004132 |
| 25 | Horiz Stabilizer Polyhedral: | na |
20070111 00004133 |
| 26 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20070111 00004134 |
| 27 | Horiz Stabilizer Taper along Trailing Edge: | No |
20070111 00004135 |
| 28 | Horiz Stabilizer Material: | Balsa |
20070111 00004136 |
| 29 | Horiz Stabilizer Construction Method: | Solid |
20070111 00004137 |
| 30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070115 00004270 |
| 31 | Horiz Stabilizer Sheeted Fully: | na |
20070111 00004138 |
| 32 | Horiz Stabilizer Sheeted Center Section: | .00 in. (0 mm) |
20070111 00004139 |
| 33 | Horiz Stabilizer Sheeted Leading Edge (effective): | .00 in. (0 mm) |
20070111 00004140 |
| 34 | Horiz Stabilizer Sheeted Trailing Edge: | .000 in. (0 mm) |
20070111 00004141 |
| 35 | Horiz Stabilizer Ribs Capped: | na |
20070111 00004142 |
| 36 | Horiz Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070111 00004143 |
| 37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070111 00004144 |
| 38 | Horiz Stabilizer Requires Struts: | No |
20070111 00004145 |
| 39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070111 00004146 |
| 40 | Horiz Stabilizer Elevator Quantity: | 2 (i.e. split into left & right halves) |
20070112 00004147 |
| 41 | Horiz Stabilizer Elevator Length (effective): | 13.62 in. (346 mm) |
20070114 00004149 |
| Horiz Stabilizer Elevator Length is 346 mm at the hinge line (closest to the wing). The Elevator Length is 346 mm at the trailing edge. | |||
| 42 | Horiz Stabilizer Elevator Chord (effective): | 2.72 in. (69 mm) |
20070114 00004151 |
| Horiz Stabilizer Elevator Chord is 69 mm at the inboard end (closest to the fuselage). The Elevator Chord is 69 mm at the outboard end. | |||
| 43 | Horiz Stabilizer Elevator Area: | 74.01 sq in. (477 sq cm) |
20070114 00004152 |
| 44 | Horiz Stabilizer Elevator Area relative to Wing Area: | 10.00 % |
20070114 00004153 |
| 45 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | 12.92 % |
20070128 00004154 |
| 46 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | 36.46 % |
20070114 00004155 |
| 47 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | 55.63 % |
20070114 00004156 |
| 48 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070112 00004157 |
| 49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070116 00004158 |
| 50 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070116 00004160 |
| 51 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070116 00004159 |
| 52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070112 00004161 |
| 53 | Horiz Stabilizer Elevator Servo Required: | Yes 1 Standard |
20070112 00004162 |
| 54 | Horiz Stabilizer Elevator Servo Location: | In servo bay located in bottom of aft end of Fuselage |
20070112 00004163 |
| 55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070112 00004164 |
| 56 | Horiz Stabilizer Elevator Servo Cover Plate: | na |
20070112 00004165 |
| 57 | Horiz Stabilizer Elevator Servo Wiring Tube: | na |
20070112 00004166 |
| 58 | Horiz Stabilizer Hatches: | na |
20070112 00004167 |
| 59 | Horiz Stabilizer Color Top Schema: | US Navy Gray |
20070222 00004168 |
| 60 | Horiz Stabilizer Color Top Main: | Gray |
20070112 00004169 |
| 61 | Horiz Stabilizer Color Top Trim: | Black. Very small elements. |
20070112 00004170 |
| 62 | Horiz Stabilizer Color Top Lines: | Gray |
20070112 00004171 |
| 63 | Horiz Stabilizer Color Top Rivets: | 3D Gray |
20070112 00004172 |
| 64 | Horiz Stabilizer Color Top vs Bottom: | Different |
20070112 00004173 |
| 65 | Horiz Stabilizer Color Bottom Schema: | One color |
20070112 00004174 |
| 66 | Horiz Stabilizer Color Bottom Main: | US Navy White |
20070112 00004175 |
| 67 | Horiz Stabilizer Color Bottom Trim: | None |
20070112 00004176 |
| 68 | Horiz Stabilizer Color Bottom Lines: | Gray and Black |
20070112 00004177 |
| 69 | Horiz Stabilizer Color Bottom Rivets: | 3D White |
20070112 00004178 |
| 70 | Horiz Stabilizer Weight: | .407 lbs (185 g) |
20070112 00004179 |
| 71 | Horiz Stabilizer More Information 1: | na |
20070111 00004180 |
| 72 | Horiz Stabilizer More Information 2: | na |
20070111 00004181 |
| 73 | Horiz Stabilizer More Information 3: | na |
20070112 00004182 |