1 | Part#: | VMA-F690NF |
20070222 00003934 |
2 | Dimensions: | Please See Note |
20070110 00003935 |
Fuselage Length is with Stabilizers and without Spinner unless otherwise noted. | |||
3 | Terminology: | Please See Note |
20070109 00003936 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. | |||
4 | Fuselage General Information 1: | na |
20070110 00003937 |
5 | Fuselage General Information 2: | na |
20070109 00003938 |
6 | Fuselage Location: | na |
20070109 00003939 |
7 | Fuselage Length with Stabilizers: | 64.57 in. (1640 mm) |
20070109 00003940 |
8 | Fuselage Length with Stabilizers and Spinner: | 68.94 in. (1751 mm) |
20070109 00003941 |
9 | Fuselage Length without Stabilizers or Spinner: | 59.33 in. (1507 mm) |
20070109 00003942 |
10 | Fuselage External Horizontal Width Maximum: | 10.87 in. (276 mm) |
20070109 00003943 |
11 | Fuselage External Horizontal Width at Firewall: | 4.06 in. (103 mm) |
20070109 00003944 |
12 | Fuselage External Vertical Thickness Maximum: | 9.25 in. (235 mm) |
20070109 00003945 |
13 | Fuselage External Vertical Thickness at Firewall: | 4.53 in. (115 mm) |
20070109 00003946 |
14 | Fuselage Internal Width of Radio Bay (effective): | 2.80 in. (71 mm) |
20070110 00003947 |
Radio Bay internal width tapers from 85 mm at the foreward former to 57 mm at the aft former. | |||
15 | Fuselage Internal Height of Radio Bay (effective): | 4.33 in. (110 mm) |
20070110 00003948 |
Radio Bay internal height varies from 107 mm at the forward former to 113 mm at the aft former. The turtle deck cavity is not included in these measurements. | |||
16 | Fuselage Internal Length of Radio Bay (effective): | 9.61 in. (244 mm) |
20070109 00003949 |
17 | Fuselage Internal Volume of Radio Bay: | 116.29 cu in. (1906 cu cm) |
20070110 00003950 |
18 | Fuselage Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070109 00003951 |
19 | Fuselage Construction Method: | Built Up |
20070109 00003952 |
20 | Fuselage Wing Saddle Tape: | No. This model utilizes foam gaskets between the wing roots and the sides of the fuselage. |
20070109 00003953 |
21 | Fuselage Sheeted Fully: | Yes |
20070109 00003954 |
22 | Fuselage Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070115 00004273 |
23 | Fuselage Shape of Main Section: | Complex semi-scale cross section |
20070109 00003955 |
24 | Fuselage Shape of Turtle Deck: | Elliptical |
20070109 00003956 |
25 | Fuselage Hatches: | Yes 2 on bottom. Forward hatch at mid ships for access to radio bay. Rear hatch near tail for access to servos. |
20070203 00003957 |
26 | Fuselage Pushrods Factory Installed: | Yes |
20070325 00003958 |
27 | Fuselage Pushrods Rudder: | 2 |
20070109 00003959 |
28 | Fuselage Pushrods Elevator: | 2 |
20070109 00003960 |
29 | Fuselage Pushrods Throttle: | 1 |
20070109 00003961 |
30 | Fuselage Pushrod Material: | Inner & outer plastic tubes and threaded rods are used for long pushrods. Threaded rods are used for short pushrods. |
20070109 00003962 |
31 | Fuselage Pushrods Threaded: | Yes both ends |
20070109 00003963 |
32 | Fuselage Pushrods In Guide Tubes: | Yes when long |
20070109 00003964 |
33 | Fuselage Pushrod Exit Guides: | Yes |
20070109 00003965 |
34 | Fuselage Canopy Factory Installed: | Yes. After factory fitting the canopy is removed for shipping |
20070109 00003966 |
35 | Fuselage Canopy attached to Fuselage with: | Screws. Canopy can be removed and then reattached. Please See Note |
20070209 00003967 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component | |||
36 | Fuselage Pilot Factory Installed: | Yes. 3D Pilot Bust |
20070128 00003968 |
37 | Fuselage Cockpit Instrument Panel: | Yes |
20070109 00003969 |
38 | Fuselage Cockpit Liner: | na |
20070109 00003970 |
39 | Fuselage Cockpit "Tub": | Yes |
20070109 00003971 |
40 | Fuselage Cockpit "Tub" attached to Fuselage with: | Screws. Cockpit Tub can be removed and then reattached |
20070110 00003972 |
41 | Fuselage Color Top Schema: | US Navy gray with black cockpit area |
20070109 00003973 |
42 | Fuselage Color Top Main: | Gray |
20070109 00003974 |
43 | Fuselage Color Top Trim: | Black with Gold exhaust nozzles |
20070109 00003975 |
44 | Fuselage Color Top Lines: | Gray and Black |
20070109 00003976 |
45 | Fuselage Color Top Rivets: | Gray 3D and Black graphics |
20070109 00003977 |
46 | Fuselage Color Top vs Bottom: | Slightly different |
20070109 00003978 |
47 | Fuselage Color Bottom Schema: | Light Camoflage pattern |
20070110 00003979 |
48 | Fuselage Color Bottom Main: | White |
20070109 00003980 |
49 | Fuselage Color Bottom Trim: | Gray with Black and Gold exhaust nozzles |
20070109 00003981 |
50 | Fuselage Color Bottom Lines: | Gray |
20070109 00003982 |
51 | Fuselage Color Bottom Rivets: | Gray 3D and Black graphics |
20070109 00003983 |
52 | Fuselage Color Left Side Schema: | US Navy Gray with "VFA 113" designator. |
20070128 00003984 |
53 | Fuselage Color Right Side Schema: | US Navy Gray with "VFA 113" designator |
20070128 00003985 |
54 | Fuselage Color Left vs Right: | Very Similar |
20070109 00003986 |
55 | Fuselage Color Side Main: | Gray |
20070109 00003987 |
56 | Fuselage Color Side Trim: | Small elements of Blue, Orange, Yellow & Black |
20070109 00003988 |
57 | Fuselage Color Side Lines: | Gray |
20070109 00003989 |
58 | Fuselage Color Side Rivets: | Gray 3D and Gray graphics |
20070109 00003990 |
59 | Fuselage Weight: | 2.94 lbs (1336 g). Please See Note |
20070109 00003991 |
The weight of the Fuselage is as it was when it is removed from the shipping box. This weight does NOT include weight related to any power systems, radio gear, control surfaces or other weight associated with end user assembly. | |||
60 | Fuselage More Information 1: | na |
20070109 00003992 |
61 | Fuselage More Information 2: | na |
20070109 00003993 |
62 | Fuselage More Information 3: | na |
20070109 00003994 |