| 1 | Part#: | VMA-F590UTH |
20071031 00007234 |
| 2 | Source Data - Wing Area: | 668.62 sq in. (4313.66 sq cm) |
20070506 00007235 |
| 3 | Source Data - Wing Area without Saddle: | 525.18 sq in. (3388.26 sq cm) |
20070325 00007236 |
| 4 | Dimensions: | Please See Note |
20070321 00007237 |
| The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
| 5 | Terminology: | Please See Note |
20070321 00007238 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 6 | Horiz Stabilizer General Information 1: | na |
20070321 00007239 |
| 7 | Horiz Stabilizer General Information 2: | na |
20070321 00007240 |
| 8 | Horiz Stabilizer Location: | Horizontal Stabilizer saddle in bottom at aft end of Fuselage |
20070321 00007241 |
| 9 | Horiz Stabilizer Span Tip to Tip: | 27.56 in. (700 mm) |
20070321 00007242 |
| 10 | Horiz Stabilizer Span (effective): | 27.56 in. (700 mm) |
20070321 00007243 |
| 11 | Horiz Stabilizer Chord Maximum: | 7.91 in. (201 mm) |
20070321 00007244 |
| 12 | Horiz Stabilizer Chord at outboard end of Elevator: | 3.46 in. (88 mm) |
20070321 00007245 |
| 13 | Horiz Stabilizer Chord (effective): | 5.69 in. (145 mm) |
20070321 00007246 |
| Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Saddle Width is 142 mm at the aft end of the saddle. | |||
| 14 | Horiz Stabilizer Area: | 156.78 sq in. (1011.50 sq cm) |
20070321 00007247 |
| 15 | Horiz Stabilizer Area relative to Wing Area: | 23.45 % |
20070506 00007248 |
| 16 | Horiz Stabilizer Width of Saddle: | 6.24 in. (159 mm) |
20070321 00007249 |
| The Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Width is 142 mm at the aft end of the saddle. | |||
| 17 | Horiz Stabilizer Length of Saddle: | 7.95 in. (202 mm) |
20070321 00007250 |
| 18 | Horiz Stabilizer Area of Saddle: | 49.63 sq in. (320 sq cm) |
20070321 00007251 |
| 19 | Horiz Stabilizer Area without Saddle: | 107.16 sq in. (691.33 sq cm) |
20070321 00007252 |
| 20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 20.40 % |
20070325 00007253 |
| 21 | Horiz Stabilizer Airfoil Shape: | Slab |
20070321 00007254 |
| 22 | Horiz Stabilizer Thickness Maximum: | .394 in. (10.0 mm) |
20070321 00007255 |
| 23 | Horiz Stabilizer Anhedral: | na |
20070321 00007256 |
| 24 | Horiz Stabilizer Dihedral at Center: | na |
20070321 00007257 |
| 25 | Horiz Stabilizer Polyhedral: | na |
20070321 00007258 |
| 26 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20070321 00007259 |
| 27 | Horiz Stabilizer Taper along Trailing Edge: | Yes |
20070321 00007260 |
| 28 | Horiz Stabilizer Material: | Balsa |
20070321 00007261 |
| 29 | Horiz Stabilizer Construction Method: | Solid |
20070321 00007262 |
| 30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070321 00007263 |
| 31 | Horiz Stabilizer Sheeted Fully: | na |
20070321 00007264 |
| 32 | Horiz Stabilizer Sheeted Center Section: | .00 in. (0 mm) |
20070321 00007265 |
| 33 | Horiz Stabilizer Sheeted Leading Edge (effective): | .00 in. (0 mm) |
20070321 00007266 |
| 34 | Horiz Stabilizer Sheeted Trailing Edge: | .000 in. (0 mm) |
20070321 00007267 |
| 35 | Horiz Stabilizer Ribs Capped: | na |
20070321 00007268 |
| 36 | Horiz Stabilizer Attaches to Fuselage via: | Metal Bolts (x3) |
20070321 00007269 |
| 37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070321 00007270 |
| 38 | Horiz Stabilizer Requires Struts: | No |
20070321 00007271 |
| 39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070321 00007272 |
| 40 | Horiz Stabilizer Elevator Quantity: | 2 (i.e. split into left & right halves) |
20070321 00007273 |
| 41 | Horiz Stabilizer Elevator Length (effective): | 10.08 in. (256 mm) |
20070321 00007274 |
| Horiz Stabilizer Elevator Length is 256 mm at the hinge line (closest to the wing). The Elevator Length is 256 mm at the trailing edge. | |||
| 42 | Horiz Stabilizer Elevator Chord (effective): | 1.95 in. (50 mm) |
20070321 00007275 |
| Horiz Stabilizer Elevator Chord is 43 mm at the inboard end (closest to the fuselage). The Elevator Chord is 56 mm at the outboard end. | |||
| 43 | Horiz Stabilizer Elevator Area: | 39.28 sq in. (253 sq cm) |
20070321 00007276 |
| 44 | Horiz Stabilizer Elevator Area relative to Wing Area: | 5.88 % |
20070506 00007277 |
| 45 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | 7.48 % |
20070325 00007278 |
| 46 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | 25.06 % |
20070321 00007279 |
| 47 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | 36.66 % |
20070321 00007280 |
| 48 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070321 00007281 |
| 49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070321 00007282 |
| 50 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070321 00007283 |
| 51 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070321 00007284 |
| 52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070321 00007285 |
| 53 | Horiz Stabilizer Elevator Servo Required: | Yes 2 Standard |
20070321 00007286 |
| 54 | Horiz Stabilizer Elevator Servo Location: | In servo mounts attached to the upper surface of the horizontal stabilizer within the saddle area |
20070321 00007287 |
| 55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070321 00007288 |
| 56 | Horiz Stabilizer Elevator Servo Cover Plate: | na |
20070321 00007289 |
| 57 | Horiz Stabilizer Elevator Servo Wiring Tube: | na |
20070321 00007290 |
| 58 | Horiz Stabilizer Hatches: | na |
20070321 00007291 |
| 59 | Horiz Stabilizer Color Top Schema: | Camoflage |
20070321 00007292 |
| 60 | Horiz Stabilizer Color Top Main: | Khaki & Olive Drab |
20070321 00007293 |
| 61 | Horiz Stabilizer Color Top Trim: | Black. Very small elements. |
20070321 00007294 |
| 62 | Horiz Stabilizer Color Top Lines: | Gray |
20070321 00007295 |
| 63 | Horiz Stabilizer Color Top Rivets: | 3D Khaki & Olive Drab |
20070321 00007296 |
| 64 | Horiz Stabilizer Color Top vs Bottom: | Different |
20070321 00007297 |
| 65 | Horiz Stabilizer Color Bottom Schema: | One color |
20070321 00007298 |
| 66 | Horiz Stabilizer Color Bottom Main: | Khaki |
20070321 00007299 |
| 67 | Horiz Stabilizer Color Bottom Trim: | None |
20070321 00007300 |
| 68 | Horiz Stabilizer Color Bottom Lines: | Black |
20070321 00007301 |
| 69 | Horiz Stabilizer Color Bottom Rivets: | 3D Khaki |
20070321 00007302 |
| 70 | Horiz Stabilizer Weight: | .348 lbs (158 g) |
20070321 00007303 |
| 71 | Horiz Stabilizer More Information 1: | na |
20070321 00007304 |
| 72 | Horiz Stabilizer More Information 2: | na |
20070321 00007305 |
| 73 | Horiz Stabilizer More Information 3: | na |
20070321 00007306 |