| 1 | Part#: | VMA-F590GTH |
20071031 00008337 |
| 2 | Source Data - Wing Area: | 668.62 sq in. (4313.66 sq cm) |
20070506 00008338 |
| 3 | Source Data - Wing Area without Saddle: | 525.18 sq in. (3388.26 sq cm) |
20070325 00008339 |
| 4 | Dimensions: | Please See Note |
20070325 00008340 |
| The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
| 5 | Terminology: | Please See Note |
20070325 00008341 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 6 | Horiz Stabilizer General Information 1: | na |
20070325 00008342 |
| 7 | Horiz Stabilizer General Information 2: | na |
20070325 00008343 |
| 8 | Horiz Stabilizer Location: | Horizontal Stabilizer saddle in bottom at aft end of Fuselage |
20070325 00008344 |
| 9 | Horiz Stabilizer Span Tip to Tip: | 27.56 in. (700 mm) |
20070325 00008345 |
| 10 | Horiz Stabilizer Span (effective): | 27.56 in. (700 mm) |
20070325 00008346 |
| 11 | Horiz Stabilizer Chord Maximum: | 7.91 in. (201 mm) |
20070325 00008347 |
| 12 | Horiz Stabilizer Chord at outboard end of Elevator: | 3.46 in. (88 mm) |
20070325 00008348 |
| 13 | Horiz Stabilizer Chord (effective): | 5.69 in. (145 mm) |
20070325 00008349 |
| Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Saddle Width is 142 mm at the aft end of the saddle. | |||
| 14 | Horiz Stabilizer Area: | 156.78 sq in. (1011.50 sq cm) |
20070325 00008350 |
| 15 | Horiz Stabilizer Area relative to Wing Area: | 23.45 % |
20070506 00008351 |
| 16 | Horiz Stabilizer Width of Saddle: | 6.24 in. (159 mm) |
20070325 00008352 |
| The Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Width is 142 mm at the aft end of the saddle. | |||
| 17 | Horiz Stabilizer Length of Saddle: | 7.95 in. (202 mm) |
20070325 00008353 |
| 18 | Horiz Stabilizer Area of Saddle: | 49.63 sq in. (320 sq cm) |
20070325 00008354 |
| 19 | Horiz Stabilizer Area without Saddle: | 107.16 sq in. (691.33 sq cm) |
20070325 00008355 |
| 20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 20.40 % |
20070325 00008356 |
| 21 | Horiz Stabilizer Airfoil Shape: | Slab |
20070325 00008357 |
| 22 | Horiz Stabilizer Thickness Maximum: | .394 in. (10.0 mm) |
20070325 00008358 |
| 23 | Horiz Stabilizer Anhedral: | na |
20070325 00008359 |
| 24 | Horiz Stabilizer Dihedral at Center: | na |
20070325 00008360 |
| 25 | Horiz Stabilizer Polyhedral: | na |
20070325 00008361 |
| 26 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20070325 00008362 |
| 27 | Horiz Stabilizer Taper along Trailing Edge: | Yes |
20070325 00008363 |
| 28 | Horiz Stabilizer Material: | Balsa |
20070325 00008364 |
| 29 | Horiz Stabilizer Construction Method: | Solid |
20070325 00008365 |
| 30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070325 00008366 |
| 31 | Horiz Stabilizer Sheeted Fully: | na |
20070325 00008367 |
| 32 | Horiz Stabilizer Sheeted Center Section: | .00 in. (0 mm) |
20070325 00008368 |
| 33 | Horiz Stabilizer Sheeted Leading Edge (effective): | .00 in. (0 mm) |
20070325 00008369 |
| 34 | Horiz Stabilizer Sheeted Trailing Edge: | .000 in. (0 mm) |
20070325 00008370 |
| 35 | Horiz Stabilizer Ribs Capped: | na |
20070325 00008371 |
| 36 | Horiz Stabilizer Attaches to Fuselage via: | Metal Bolts (x3) |
20070325 00008372 |
| 37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070325 00008373 |
| 38 | Horiz Stabilizer Requires Struts: | No |
20070325 00008374 |
| 39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070325 00008375 |
| 40 | Horiz Stabilizer Elevator Quantity: | 2 (i.e. split into left & right halves) |
20070325 00008376 |
| 41 | Horiz Stabilizer Elevator Length (effective): | 10.08 in. (256 mm) |
20070325 00008377 |
| Horiz Stabilizer Elevator Length is 256 mm at the hinge line (closest to the wing). The Elevator Length is 256 mm at the trailing edge. | |||
| 42 | Horiz Stabilizer Elevator Chord (effective): | 1.95 in. (50 mm) |
20070325 00008378 |
| Horiz Stabilizer Elevator Chord is 43 mm at the inboard end (closest to the fuselage). The Elevator Chord is 56 mm at the outboard end. | |||
| 43 | Horiz Stabilizer Elevator Area: | 39.28 sq in. (253 sq cm) |
20070325 00008379 |
| 44 | Horiz Stabilizer Elevator Area relative to Wing Area: | 5.88 % |
20070506 00008380 |
| 45 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | 7.48 % |
20070325 00008381 |
| 46 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | 25.06 % |
20070325 00008382 |
| 47 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | 36.66 % |
20070325 00008383 |
| 48 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070325 00008384 |
| 49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070325 00008385 |
| 50 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070325 00008386 |
| 51 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070325 00008387 |
| 52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070325 00008388 |
| 53 | Horiz Stabilizer Elevator Servo Required: | Yes 2 Standard |
20070325 00008389 |
| 54 | Horiz Stabilizer Elevator Servo Location: | In servo mounts attached to the upper surface of the horizontal stabilizer within the saddle area |
20070325 00008390 |
| 55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070325 00008391 |
| 56 | Horiz Stabilizer Elevator Servo Cover Plate: | na |
20070325 00008392 |
| 57 | Horiz Stabilizer Elevator Servo Wiring Tube: | na |
20070325 00008393 |
| 58 | Horiz Stabilizer Hatches: | na |
20070325 00008394 |
| 59 | Horiz Stabilizer Color Top Schema: | Predominantly One Color |
20070325 00008395 |
| 60 | Horiz Stabilizer Color Top Main: | Gray |
20070325 00008396 |
| 61 | Horiz Stabilizer Color Top Trim: | Black. Very small elements. |
20070325 00008397 |
| 62 | Horiz Stabilizer Color Top Lines: | Gray |
20070325 00008398 |
| 63 | Horiz Stabilizer Color Top Rivets: | 3D Gray |
20070325 00008399 |
| 64 | Horiz Stabilizer Color Top vs Bottom: | Different |
20070325 00008400 |
| 65 | Horiz Stabilizer Color Bottom Schema: | Predominantly One Color |
20070325 00008401 |
| 66 | Horiz Stabilizer Color Bottom Main: | White |
20070325 00008402 |
| 67 | Horiz Stabilizer Color Bottom Trim: | None |
20070325 00008403 |
| 68 | Horiz Stabilizer Color Bottom Lines: | Black |
20070325 00008404 |
| 69 | Horiz Stabilizer Color Bottom Rivets: | 3D White |
20070325 00008405 |
| 70 | Horiz Stabilizer Weight: | .348 lbs (158 g) |
20070325 00008406 |
| 71 | Horiz Stabilizer More Information 1: | na |
20070325 00008407 |
| 72 | Horiz Stabilizer More Information 2: | na |
20070325 00008408 |
| 73 | Horiz Stabilizer More Information 3: | na |
20070325 00008409 |