| 1 | Part#: | VMA-C210XPMV |
20071031 00012083 |
| 2 | Dimensions: | na |
20070505 00012084 |
| 3 | Terminology: | na |
20070505 00012085 |
| 4 | Motor (Electric) Mount General Information 1: | na |
20070505 00012086 |
| 5 | Motor (Electric) Mount General Information 2: | na |
20070505 00012087 |
| 6 | Motor Mount Type: | Flat vertical surface to which backing plate of motor is attached |
20070505 00012088 |
| 7 | Motor Mount Material: | Wood |
20070505 00012089 |
| 8 | Motor Mount Attaches to Firewall with: | na |
20070505 00012090 |
| 9 | Motor Mount Retains Motor backing plate with: | Machine Bolts, Nuts and Washers |
20070505 00012091 |
| 10 | Motor Mount Drilling Required: | Yes. To match the mounting hole pattern of your motor backing plate. (Backing plates of VMAX motors, VMAX Power Packs & VMAX Power Modules mount without drilling) |
20070505 00012092 |
| 11 | Motor Mount Drilling Optional: | na |
20070505 00012093 |
| 12 | Motor Mounting Bolt Type Recommended: | Black Allen Head Machine Bolt |
20070505 00012094 |
| 13 | Motor Mount Length Max using factory cowl: | .00 in. (.00 mm) |
20070505 00012095 |
| 14 | Motor Mount Max Motor Lug Hole Spacing if using 4mm bolts through lugs into existing threaded holes in T-beams but not using clamps: | .00 in. (.00 mm) |
20070505 00012096 |
| 15 | Motor Mount T-Bar Beam Length Max: | .00 in. (.00 mm) |
20070505 00012097 |
| 16 | Motor Mount More Information: | na |
20070505 00012098 |
| 17 | Motor (Electric) Mount More Information 1: | na |
20070505 00012099 |
| 18 | Motor (Electric) Mount More Information 2: | na |
20070505 00012100 |
| 19 | Motor (Electric) Mount More Information 3: | na |
20070505 00012101 |