Product Information
PRODUCT INFORMATION
 
 
SPC-TM_SM25J
SPEC TEMPLATE MASTER - SPINNER METAL - SM25J
 
 



1 Part#: SPC-TM SM25J   20070127
00004607
2 Dimensions: na   20070127
00004600
3 Terminology: na   20070127
00004601
4 Spinner Metal General Information 1: na   20070127
00004602
5 Spinner Metal General Information 2: na   20070127
00004603
6 Spinner Material: Metal   20070127
00004608
7 Spinner Color: na   20070127
00004609
8 Spinner Shape: na   20070127
00004610
9 Spinner Length from back of Backing Plate to front tip of Nose: .00 in. (0 mm)   20070127
00004612
10 Spinner Diameter of Backing Plate: .00 in. (0 mm)   20070127
00004613
11 Spinner Mounting System: Please See Note   20070128
00004614
The spinner backing plate is slid over the crankshaft and placed into contact with the engine thrust washer. The propeller and prop washer are then fitted next and retained into place with the elongated prop nut supplied with the spinner. The prop nut is then cinched down tightly. The spinner cone is then fitted so that the edge of the open end of the cone fits and is constrained from radial movement by the groove that runs around the perimeter of the front face of the backing plate. The supplied hex head machine screw is then used to secure the cone.
12 Spinner Prop Nut Length: .00 in. (0 mm)   20070127
00004615
13 Spinner Prop Nut Diameter: .00 in. (0 mm)   20070127
00004616
14 Spinner Prop Nut Tightens via: Flats on Side of Nut   20070127
00004617
15 Spinner Prop Nut Thread for Crankshaft: na   20070127
00004618
16 Spinner Prop Nut Threaded to accept Screw to attach Cone: Yes   20070127
00004619
17 Spinner Length of Screw to attach Cone: .00 in. (0 mm)   20070127
00004620
18 Spinner Diameter of Screw to attach Cone: .00 in. (0 mm)   20070127
00004621
19 Spinner Crankshaft Collett Supplied: Yes. 1 Brass   20070127
00004622
20 Spinner (complete) Weight: .000 lbs (0 g).   20070127
00004623
21 Spinner Metal More Information 1: na   20070127
00004604
22 Spinner Metal More Information 2: na   20070127
00004605
23 Spinner Metal More Information 3: na   20070127
00004606

20110315 14:53:15 PST. Subject to Change Without Notice.
Copyright Richmond RC Supply Ltd. SPC-TM_SM25J_spec.htm