Product Information
PRODUCT INFORMATION
 
 
SPC-TM_PR25J
SPEC TEMPLATE MASTER - PRECISION - PR25J
 
 



1 Dimensions: na   20070106
00003912
2 Terminology: na   20070106
00003913
3 Precision General Information 1: na   20070207
00003914
4 Precision General Information 2: na   20070106
00003915
5 Units of Measure: All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial.   20070106
00003923
6 In general, measurements are accurate to within: + - 3% except + - .30 for measurements of magnitude 10.0 or less.   20070106
00003916
7 Distances such as length, width, depth, thickness etc are measured to the nearest: 1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less   20070106
00003917
When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision.
8 Weights and Mass are measured to the nearest: 1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less   20070106
00003924
9 Volumes related to fluids are measured to the nearest: 1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less   20070106
00003925
10 Volumes related to non-fluids are measured to the nearest: .01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less.   20070106
00003926
11 Precision More Information 1: na   20070106
00003918
12 Precision More Information 2: na   20070106
00003919
13 Precision More Information 3: na   20070106
00003920

20110315 14:52:59 PST. Subject to Change Without Notice.
Copyright Richmond RC Supply Ltd. SPC-TM_PR25J_spec.htm