1 | Part#: | SPC-TM LN25J |
20070209 00004341 |
2 | Dimensions: | na |
20070116 00004293 |
3 | Terminology: | na |
20070116 00004294 |
4 | Nose Gear General Information 1: | na |
20070116 00004295 |
5 | Nose Gear General Information 2: | na |
20070116 00004296 |
6 | Nose Gear Material: | Wire |
20070121 00004331 |
7 | Nose Gear Shock Coil: | Yes |
20070126 00004334 |
8 | Nose Gear Strut (Simulated) Provided: | na |
20070126 00004337 |
9 | Nose Gear Strut (Simulated) Pre-Assembled: | na |
20070126 00004338 |
10 | Nose Gear Wire Length from Axle to Coil: | .00 in. (0.00 mm) |
20070126 00004339 |
11 | Nose Gear Wire Length above Coil: | .00 in. (0.00 mm) |
20070126 00004340 |
12 | Nose Gear Material: | Wire and Functional Oleo Tubes |
20070121 00004435 |
13 | Nose Gear Shock Absorbing: | Yes. Shock Absorption via Functional Oleo Struts (2) |
20070126 00004438 |
14 | Nose Gear Strut (Functional Oleo) Provided: | na |
20070126 00004344 |
15 | Nose Gear Strut (Functional Oleo) Pre-Assembled: | na |
20070126 00004345 |
16 | Nose Gear Length from Axle to Oleo Scissor Hinge Center Pin: | .00 in. (0 mm) |
20070126 00004436 |
17 | Nose Gear Length above Oleo Scissor Hinge Center Pin: | .00 in. (0 mm) |
20070126 00004437 |
18 | Nose Gear Wire Diameter: | .157 in. (4.000 mm) |
20070126 00004332 |
19 | Nose Gear Shaped by Factory: | Yes |
20070121 00004333 |
20 | Nose Gear Axle Provided: | Yes as part of the Gear Leg |
20070121 00004335 |
21 | Nose Gear Collars Provided: | Yes 2 |
20070121 00004336 |
22 | Nose Gear Weight (without wheel): | .00 lbs (0 g). Please See Note |
20070121 00004342 |
The weight of the nose gear does not include the weight of wheel. | |||
23 | Nose Gear More Information 1: | na |
20070121 00004297 |
24 | Nose Gear More Information 2: | na |
20070116 00004298 |
25 | Nose Gear More Information 3: | na |
20070119 00004299 |