1 | Part#: | VMA-T210WTV |
20070428 00010637 |
7 | Dimensions: | Please See Note |
20070425 00010643 |
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments. | |||
8 | Terminology: | Please See Note |
20070425 00010644 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
11 | Vertical Stabilizer Location: | Vertical Slot in Top of aft end of Fuselage |
20070425 00010647 |
12 | Vertical Stabilizer Quantity: | 1 |
20070425 00010648 |
21 | Vertical Stabilizer Airfoil Shape: | Semi-Symmetrical |
20070426 00010657 |
25 | Vertical Stabilizer Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070425 00010661 |
26 | Vertical Stabilizer Construction Method: | Built Up |
20070425 00010662 |
27 | Vertical Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070425 00010663 |
32 | Vertical Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070425 00010668 |
33 | Vertical Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070425 00010669 |
34 | Vertical Stabilizer Requires Struts: | No |
20070425 00010670 |
35 | Vertical Stabilizer Rudder Factory Installed: | Yes |
20070425 00010671 |
36 | Vertical Stabilizer Rudder Quantity: | 1 (i.e. not split, not dual rudders) |
20070425 00010672 |
47 | Vertical Stabilizer Rudder Hinge Type: | Flexible Live Low Gap |
20070425 00010683 |
48 | Vertical Stabilizer Rudder Hinge Material: | Proprietary Super Strong |
20070425 00010684 |
49 | Vertical Stabilizer Rudder Hinge Adhesive: | Cyanoacrylate |
20070425 00010685 |
50 | Vertical Stabilizer Rudder Hinges Pinned: | Yes |
20070425 00010686 |
51 | Vertical Stabilizer Rudder Servo Required: | Yes 1 Standard |
20070425 00010687 |
52 | Vertical Stabilizer Rudder Servo Location: | Exterior of left side of fuselage near the tail |
20070425 00010688 |
53 | Vertical Stabilizer Rudder Servo Mounting Method: | Tray |
20070425 00010689 |