CONDITIONS OF USE | 1 | ||
SUMMARY INFORMATION | 2 | ||
GENERAL SUMMARY | 3 | ||
SPECIFICATIONS SUMMARY | 18 | ||
TECHNICAL SUMMARY | 44 | ||
KNOWLEDGE BASE | 67 | ||
Knowledge Base - DIRECTORY (TOC) | 68 | ||
Knowledge Base - HOW TO | 69 | ||
Knowledge Base - PRIORITY RESPONSE TICKETS | 72 | ||
Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE | 73 | ||
Knowledge Base - SUPPORT SERVICES | 74 | ||
DETAILED SPECIFICATIONS | 75 | ||
ACCESSORIES INCLUDED | 76 | ||
CLEANING | 102 | ||
COVERING | 114 | ||
COWL | 141 | ||
ENGINE | 171 | ||
ENGINE MOUNT SYSTEM | 198 | ||
ENGINE MOUNT | 209 | ||
FUEL TANK | 231 | ||
FUSELAGE | 258 | ||
LANDING GEAR | 322 | ||
RADIO SYSTEM | 454 | ||
SERVO MOUNTING | 489 | ||
SET UP | 552 | ||
STABILIZER - HORIZONTAL & ELEVATOR | 589 | ||
STABILIZER - VERTICAL & RUDDER | 664 | ||
WEIGHTS | 738 | ||
WING | 756 | ||
WING LOADING | 859 | ||
APPENDICES | 874 | ||
PACKING LIST | 875 | ||
PACKAGING | 985 | ||
PRECISION | 1025 |
1 | CONDITIONS OF USE | Back to TOP |
20100217 00005668 |
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice |
2 | SUMMARY INFORMATION | Back to TOP |
20070222 00005669 |
The Summary tables below provide the most commonly requested Information, Specifications & Technical data. |
3 | GENERAL SUMMARY | Back to TOP |
20070222 00005670 |
8 | Part#: | VMA-F690B |
20110302 00005675 |
9 | Description: | VMAR F18 HORNET 60-91 JET (PROP) ARF 3DS - BLUE |
20110302 00005676 |
10 | Highlights: | MAP IN EFFECT - WITH VCOTE-2 3D DETAILING SYSTEM |
20110302 00005677 |
11 | Price List & Web Category: | VMA Products AIRPLANE KITS ARF JET (PROP) |
20110302 00005678 |
12 | $USA Retail: | 349.99 |
20110302 00005679 |
13 | $CDN Retail: | 389.99 |
20110302 00005680 |
14 | Start Ship Date: | 20061010 |
20110302 00005681 |
18 | SPECIFICATIONS SUMMARY | Back to TOP |
20070222 00005685 |
27 | Type: | Jet (Prop) .60-.91 ARF Low-Mid Wing Trike |
20070222 00005694 |
28 | Skill: | For those with intermediate or better RC Flying skills |
20070222 00005695 |
29 | Cowl: | No |
20070222 00005696 |
30 | Landing Gear Type: | Trike |
20070222 00005697 |
31 | Engine 2 Stroke: | .60 to .91 cu in. (.91 Recommended) |
20070222 00005698 |
33 | Fuselage Length: | 64.57 in. (1640 mm) |
20070222 00005700 |
34 | Radio for Basic Remote Control of this product: | Analog or Computer 4 Channels with 7 Servos |
20070222 00005701 |
35 | Radio with Flaperons + Flaps: | Computer 6 Channels with 9 Servos |
20070222 00005702 |
36 | Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min: | 10.01 lbs (4549.22 g) |
20070222 00005703 |
37 | Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max: | 10.61 lbs (4821.36 g) |
20070222 00005704 |
38 | Wing Airfoil Shape: | Symmetrical |
20070222 00005705 |
39 | Wing Area: | 740.34 sq in. (4776.39 sq cm) |
20070222 00005706 |
40 | Wing Span: | 57.24 in. (1454 mm) |
20070222 00005707 |
44 | TECHNICAL SUMMARY | Back to TOP |
20070222 00005711 |
56 | Engine Mounting System: | Fixed firewall permanently attached to fuselage |
20070427 00005723 |
57 | Fuselage Pushrods Factory Installed: | Yes |
20070222 00005724 |
58 | Fuselage Pilot Factory Installed: | Yes. 3D Pilot Bust |
20070222 00005725 |
59 | Wing Ailerons Flaperon Ready with Computer Radio: | Yes |
20070222 00005726 |
60 | Wing Flaps Factory Installed: | Yes |
20070222 00005727 |
61 | Wing Plugs In to Fuselage: | Yes |
20070222 00005728 |
62 | Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: | 33.41 oz/sq ft (1.02 g/sq cm) |
20070222 00005729 |
63 | Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max: | 35.27 oz/sq ft (1.08 g/sq cm) |
20070222 00005730 |
67 | KNOWLEDGE BASE | Back to TOP |
20070222 00005734 |
Our Knowledge Base provides 24x7x365 access to an extensive and growing library of support & service offerings. This On-Line resource contains thousands of articles, answers to frequently asked questions (FAQ), operations manuals, additional information not found in the manuals, graphic files for download and access to our Priority Response system for Ticket Management and RMA numbers for authorised returns. |
68 | Knowledge Base - DIRECTORY (TOC) | Back to TOP |
20070222 00005735 |
Knowledge Base - Directory (TOC) Listing This link goes directly to the top level of our Knowledge Base and offers a Directory Table of Contents (TOC) listing. This is a good way to enter the Knowledge Base if you don't know exactly what you are looking for and want an overview of what is available. The Table of Contents (TOC) is sorted alphabetically and you will see near the top of the list, links to Site How To, Support Services, and Subscriptions. Further down in the list you will see links to Technical Information. Before diving into the specifics, we encourage users to check out the Site How To information. Technical Information is organized into product lines or categories and usually within a particular product line or category there is a section for General information and another for detailed information on a Product by Product basis. It's a good idea to review the General Information AND the Product by Product information. Use the "Search" tool located in the top left of the Knowledge Base window to search by product name, part number or key words. The "Advanced Search" provides for powerful SQL based filtering to narrow your search results. |
69 | Knowledge Base - HOW TO | Back to TOP |
20070222 00005736 |
Knowledge Base - How To and News This link goes directly to the Site How To section of our Knowledge Base and offers Help on How To work with Tickets, How To Search our Knowledge Base etc. |
72 | Knowledge Base - PRIORITY RESPONSE TICKETS | Back to TOP |
20070222 00005738 |
Knowledge Base - Priority Response Tickets This link goes directly to the Knowledge Base Priority Response login screen. Login is required to use the Priority Response Ticket System. New Users who are trying to login for the First Time will need to Register First. Registration takes a minute or less. Users may find the following link helpful Knowledge Base - Priority Response Tickets - Help and How To |
73 | Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE | Back to TOP |
20070224 00005739 |
Knowledge Base - Priority Response Notification Service This link goes directly to the Priority Response Notification Service section of our Knowledge Base where we offer information about how to subscribe to automatic Notifications of changes or additions to articles related to a particular product. Priority Response registered members can receive automatic updates to information related to the products they are interested in. Subscribers can elect to monitor information about one product or one subject or dozens of any mix of either. |
74 | Knowledge Base - SUPPORT SERVICES | Back to TOP |
20070222 00005740 |
Knowledge Base - Support Services This link goes directly to the Support Services section of our Knowledge Base where we offer information related to Contacts, Claims for Missing or Shipping Damaged Components, Warranty Claims, Return Procedures, Subscription Services for Automatic Notification and Shipping Information. |
75 | DETAILED SPECIFICATIONS | Back to TOP |
20070222 00005741 |
The Detailed Specification tables below provide highly detailed technical information about this product and components that make up this product. Set Up values and calculated Performance Data are also provided where applicable. |
76 | ACCESSORIES INCLUDED | Back to TOP |
20070222 00005742 |
89 | Accessories Drop Tank: | Yes. Please See Note. |
20070222 00005755 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component | |||
97 | Accessories Spinner: | Yes. Please See Note |
20070222 00005763 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component |
102 | CLEANING | Back to TOP |
20070222 00005768 |
107 | Cleaning Caution: | Do NOT NOT NOT clean with Simple Green, 409, 2-butoxymethanol, Butyl Cellulose, Glycol Ethers or Solvents. Test all plastics first. Test small area of covering first. Avoid dousing or flooding. Lightly spray only. Please See Notes. |
20070222 00005773 |
Before cleaning this product either before or after use, thoroughly review any Read Me First documents that may have been included with this product AND the information at the following link: VMAR - Cleaning Model Aircraft | |||
108 | Recommended Cleaner: | Fantastic diluted up to 50/50 with water |
20070222 00005774 |
109 | Cleaning Method: | Do NOT NOT NOT spray any cleaner directly onto plastic parts or canopy without first testing thoroughly. Mist cleaner onto model, then wipe gently with paper towel. |
20070222 00005775 |
110 | Polishing Method: | Spray Armorall onto paper towel then wipe onto surface of model. Use another paper towel or soft cloth to buff to high gloss. |
20070222 00005776 |
114 | COVERING | Back to TOP |
20070222 00005780 |
119 | Covering Caution: | Please See Note |
20070222 00005785 |
Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information | |||
120 | Covering Factory Applied: | Yes |
20070222 00005786 |
121 | Covering Type: | VCOTE2-3DS (3D Detailing System) |
20070222 00005787 |
122 | Covering Material: | Heat Shrink Film with Heat Activated Adhesive |
20070222 00005788 |
123 | Covering Heat Shrinkable: | Yes, with Medium to High Temperature |
20070222 00005789 |
124 | Covering Seams: | Minimal. Sealed with Sure Seal System |
20070222 00005790 |
125 | Covering Repairable: | Yes with Heat Iron and Heat Gun |
20070222 00005791 |
126 | Covering Repair & Maintenance Method: | Please See Note |
20070222 00005792 |
Please do NOT assume that this covering has the same characteristics as older or other covering systems. It may but it may not and diving into a repair without preparing can be an expensive one way trip into trouble. Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information | |||
127 | Covering Patch Sheets Available: | Yes, as an aftermarket item. Please See Note |
20070222 00005793 |
For covering patch sheets, please consult the spare parts listing for this product. | |||
128 | Covering Sets Available: | Yes, as an aftermarket item. Please See Note |
20070222 00005794 |
For covering sets consisting of original factory covering sheets, please consult the spare parts listing for this product. Covering sets are intended for aftermarket application following large scale repairs to major components such as wings, fuselages and stabilizers. | |||
129 | Covering Fuelproof Caution: | If above 15% Nitro Test All Plastics First |
20070222 00005795 |
130 | Covering Graphics Factory Applied: | Yes |
20070222 00005796 |
131 | Covering Graphics Inside the Covering: | Yes. Between the Base Layer and the Clear Top Layer |
20070222 00005797 |
132 | Covering Fuelproof to Glow Fuel: | Yes for common model engine glow fuel to at least 25% nitromethane. |
20070222 00005798 |
133 | Covering Decals: | No. All graphics factory applied |
20070222 00005799 |
134 | Covering Fuelproof to other Model Fuel: | No known issues. Please See Note. |
20070222 00005800 |
Caution: Avoid applying raw fuel of any type onto the model. Test all plastics first. Test small out of sight area of covering first. | |||
135 | Covering Layers: | No. |
20070222 00005801 |
136 | Covering Strips: | No. |
20070222 00005802 |
137 | Covering Stripes: | No. |
20070222 00005803 |
141 | COWL | Back to TOP |
20070222 00005807 |
142 | Cowl On this model: | No |
20070222 00005808 |
171 | ENGINE | Back to TOP |
20070222 00005810 |
176 | Engine Location: | Front end of Fuselage |
20070222 00005815 |
177 | Engine Location of Propeller: | Forward of Engine (Tractor) |
20070222 00005816 |
178 | Engine Orientation: | 90 degrees (Head Facing Right) |
20070222 00005817 |
179 | Engine Quantity: | 1 |
20070222 00005818 |
180 | Engine 2 Stroke Minimum Size: | .60 cu in. (9.83 cu cm) |
20070222 00005819 |
181 | Engine 2 Stroke Maximum Size: | .91 cu in. (14.91 cu cm) |
20070222 00005820 |
182 | Engine 2 Stroke Recommended Size: | .91 cu in. 14.91 cu cm) |
20070222 00005821 |
186 | Engine 4 Stroke Recommendation: | This model has been designed to accomodate 2 stroke engines. No provision has been made for the use of 4 stroke engines in this model. |
20070222 00005825 |
187 | Engine Horizontal Thrust Adjustable: | Yes by inserting washers |
20070222 00005826 |
188 | Engine Horizontal Thrust Recommended: | 0 degrees |
20070222 00005827 |
189 | Engine Horizontal Thrust Maximum Angle: | 3 degrees Right |
20070222 00005828 |
190 | Engine Vertical Thrust Adjustable: | Yes by adjusting position of engine on engine mount beams |
20070222 00005829 |
191 | Engine Vertical Thrust Recommended: | 0 degrees |
20070222 00005830 |
192 | Engine Vertical Thrust Maximum Angle: | 2 degrees Down |
20070222 00005831 |
193 | Engine Replace with Electric Motor: | Please See Note |
20070222 00005832 |
If your model is equipped with a Power Module (see section re Engine Mount System) then conversion to Electric Motor power is likely possible. For more information please click on the following link: More Information about Electric Power Conversions & Requirements | |||
194 | Engine Replace with Jet (Turbine): | Not Recommended. Please See Note |
20070222 00005833 |
This model has been designed to use a 2 stroke engine mounted in the nose and turning a propeller in a standard "tractor" power configuration. For information about converting this model to use Jet (Turbine) power please click on the following link: More Information about Jet (Turbine) Conversions & Requirements |
198 | ENGINE MOUNT SYSTEM | Back to TOP |
20070222 00005837 |
204 | Engine Mounting System: | Fixed firewall permanently attached to fuselage |
20070427 00003534 |
205 | Engine Mount Firewall Drilled for Engine Mount: | Yes |
20070427 00003536 |
209 | ENGINE MOUNT | Back to TOP |
20070222 00005839 |
210 | Engine Mount Quantity: | 1 Set for 1 Engine |
20070222 00005840 |
211 | Engine Mount Installed: | Yes |
20070222 00005841 |
212 | Engine Mount Engine Width Max: | 1.57 in. (40 mm) |
20070222 00005842 |
215 | Part#: | RRC-MOUNTUPP |
20110223 00005270 |
220 | Engine Mount Type: | T-Bar Beams (2) without clamp plates or fasteners |
20070131 00005294 |
221 | Engine Mount Material: | Composite T-Bar Beams |
20070131 00005293 |
222 | Engine Mount Attaches to Firewall with: | 2 Machine Bolts per T-Bar Beam |
20070131 00005277 |
223 | Engine Mount Retains Engine with: | End user supplied Fasteners |
20070131 00005278 |
224 | Engine Mount Drilling Required: | Yes |
20070131 00005279 |
225 | Engine Mount Drilling Optional: | No. Must Drill |
20070131 00005280 |
226 | Engine Mount Mounting Bolt Type: | Black Allen Head Machine Bolts with Washers and Fiber Insert Lock Nuts recommended |
20070131 00005281 |
231 | FUEL TANK | Back to TOP |
20070222 00005844 |
232 | Fuel Tank Included: | Yes |
20070222 00005845 |
233 | Fuel Tank Installation: | Mounts aft of firewall in fuel tank compartment |
20070222 00005846 |
234 | Fuel Tank is Accessible by: | Removing Canopy (screws) and Cockpit Tub (screws) |
20070222 00005847 |
237 | Part#: | VMA-TANK3503 |
20100328 00003866 |
242 | Fuel Tank Material: | Plastic |
20061231 00001768 |
243 | Fuel Tank Metal Tubes Included: | 3 (Straight) |
20070203 00001769 |
244 | Fuel Tank Flexible Tubing Included: | No. Select for fuel type. |
20061228 00001770 |
245 | Fuel Tank Safety Stopper System: | Yes. Metal overcap retains stopper and prevents tank neck from splitting. |
20061221 00001881 |
246 | Fuel Tank Stopper Compatibility: | Glow Fuel Only |
20061221 00001771 |
247 | Fuel Tank Clunk: | Yes |
20061221 00001772 |
248 | Fuel Tank Length (external not including neck): | 5.16 in. (131 mm) |
20110330 00001884 |
249 | Fuel Tank Width A (external): | 2.40 in. (61 mm) |
20061221 00001885 |
250 | Fuel Tank Width B (external): | 2.05 in. (52 mm) |
20061221 00001886 |
251 | Fuel Tank Capacity: | 11.645 oz. (330 ml) |
20070106 00001773 |
252 | Fuel Tank Installation Gasket: | Yes |
20061221 00001882 |
253 | Fuel Tank Weight (empty): | .132 lbs (60 g). Please See Note |
20070207 00001888 |
The Fuel Tank Weight (empty) includes the tank, clunk, stopper, metal tubes and gasket. It does NOT include any flexible fuel tubing inside the tank. | |||
254 | Fuel Tank Weight (full): | .862 lbs (392 g). Please See Note |
20070207 00001889 |
The Fuel Tank Weight (full) includes the tank, clunk, stopper, metal tubes, gasket, flexible fuel tubing inside the tank and a full load of glow fuel. The weight does not include the weight of any external fuel tubing. |
258 | FUSELAGE | Back to TOP |
20070222 00005849 |
260 | Part#: | VMA-F690BF |
20070222 00005343 |
261 | Dimensions: | Please See Note |
20070222 00005344 |
Fuselage Length is with Stabilizers and without Spinner unless otherwise noted. | |||
262 | Terminology: | Please See Note |
20070222 00005345 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. | |||
266 | Fuselage Length with Stabilizers: | 64.57 in. (1640 mm) |
20070222 00005349 |
267 | Fuselage Length with Stabilizers and Spinner: | 68.94 in. (1751 mm) |
20070222 00005350 |
268 | Fuselage Length without Stabilizers or Spinner: | 59.33 in. (1507 mm) |
20070222 00005351 |
269 | Fuselage External Horizontal Width Maximum: | 10.87 in. (276 mm) |
20070222 00005352 |
270 | Fuselage External Horizontal Width at Firewall: | 4.06 in. (103 mm) |
20070222 00005353 |
271 | Fuselage External Vertical Thickness Maximum: | 9.25 in. (235 mm) |
20070222 00005354 |
272 | Fuselage External Vertical Thickness at Firewall: | 4.53 in. (115 mm) |
20070222 00005355 |
273 | Fuselage Internal Width of Radio Bay (effective): | 2.80 in. (71 mm) |
20070222 00005356 |
Radio Bay internal width tapers from 85 mm at the foreward former to 57 mm at the aft former. | |||
274 | Fuselage Internal Height of Radio Bay (effective): | 4.33 in. (110 mm) |
20070222 00005357 |
Radio Bay internal height varies from 107 mm at the forward former to 113 mm at the aft former. The turtle deck cavity is not included in these measurements. | |||
275 | Fuselage Internal Length of Radio Bay (effective): | 9.61 in. (244 mm) |
20070222 00005358 |
276 | Fuselage Internal Volume of Radio Bay: | 116.29 cu in. (1906 cu cm) |
20070222 00005359 |
277 | Fuselage Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070222 00005360 |
278 | Fuselage Construction Method: | Built Up |
20070222 00005361 |
279 | Fuselage Wing Saddle Tape: | No. This model utilizes foam gaskets between the wing roots and the sides of the fuselage. |
20070222 00005362 |
280 | Fuselage Sheeted Fully: | Yes |
20070222 00005363 |
281 | Fuselage Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005364 |
282 | Fuselage Shape of Main Section: | Complex semi-scale cross section |
20070222 00005365 |
283 | Fuselage Shape of Turtle Deck: | Elliptical |
20070222 00005366 |
284 | Fuselage Hatches: | Yes 2 on bottom. Forward hatch at mid ships for access to radio bay. Rear hatch near tail for access to servos. |
20070222 00005367 |
285 | Fuselage Pushrods Factory Installed: | Yes |
20070222 00005368 |
286 | Fuselage Pushrods Rudder: | 2 |
20070222 00005369 |
287 | Fuselage Pushrods Elevator: | 2 |
20070222 00005370 |
288 | Fuselage Pushrods Throttle: | 1 |
20070222 00005371 |
289 | Fuselage Pushrod Material: | Inner & outer plastic tubes and threaded rods are used for long pushrods. Threaded rods are used for short pushrods. |
20070222 00005372 |
290 | Fuselage Pushrods Threaded: | Yes both ends |
20070222 00005373 |
291 | Fuselage Pushrods In Guide Tubes: | Yes when long |
20070222 00005374 |
292 | Fuselage Pushrod Exit Guides: | Yes |
20070222 00005375 |
293 | Fuselage Canopy Factory Installed: | Yes. After factory fitting the canopy is removed for shipping |
20070222 00005376 |
294 | Fuselage Canopy attached to Fuselage with: | Screws. Canopy can be removed and then reattached. Please See Note |
20070222 00005377 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component | |||
295 | Fuselage Pilot Factory Installed: | Yes. 3D Pilot Bust |
20070222 00005378 |
296 | Fuselage Cockpit Instrument Panel: | Yes |
20070222 00005379 |
298 | Fuselage Cockpit "Tub": | Yes |
20070222 00005381 |
299 | Fuselage Cockpit "Tub" attached to Fuselage with: | Screws. Cockpit Tub can be removed and then reattached |
20070222 00005382 |
300 | Fuselage Color Top Schema: | Blue Angels with yellow turtle deck aft of cockpit |
20070222 00005383 |
301 | Fuselage Color Top Main: | Blue |
20070222 00005384 |
302 | Fuselage Color Top Trim: | Yellow and Grey with Gold exhaust nozzles |
20070222 00005385 |
303 | Fuselage Color Top Lines: | Gray and Black |
20070222 00005386 |
304 | Fuselage Color Top Rivets: | Gray 3D and Black graphics |
20070222 00005387 |
305 | Fuselage Color Top vs Bottom: | Different |
20070222 00005388 |
306 | Fuselage Color Bottom Schema: | Blue Angels |
20070222 00005389 |
307 | Fuselage Color Bottom Main: | Blue |
20070222 00005390 |
308 | Fuselage Color Bottom Trim: | Blue with Gold exhaust nozzles |
20070222 00005391 |
309 | Fuselage Color Bottom Lines: | Gray |
20070222 00005392 |
310 | Fuselage Color Bottom Rivets: | Gray 3D and Black graphics |
20070222 00005393 |
311 | Fuselage Color Left Side Schema: | Blue with "Blue Angels" logo. |
20070222 00005394 |
312 | Fuselage Color Right Side Schema: | Blue with "Blue Angels" designator |
20070222 00005395 |
313 | Fuselage Color Left vs Right: | Very Similar |
20070222 00005396 |
314 | Fuselage Color Side Main: | Blue |
20070222 00005397 |
315 | Fuselage Color Side Trim: | Small elements of Orange, Yellow & Black |
20070222 00005398 |
316 | Fuselage Color Side Lines: | Gray |
20070222 00005399 |
317 | Fuselage Color Side Rivets: | Gray 3D and Gray graphics |
20070222 00005400 |
318 | Fuselage Weight: | 2.94 lbs (1336 g). Please See Note |
20070222 00005401 |
The weight of the Fuselage is as it was when it is removed from the shipping box. This weight does NOT include weight related to any power systems, radio gear, control surfaces or other weight associated with end user assembly. |
322 | LANDING GEAR | Back to TOP |
20070222 00005851 |
327 | Landing Gear Type: | Trike |
20070222 00005856 |
328 | Nose Gear Included: | Yes |
20070222 00005857 |
329 | Nose Gear Mounted to: | Fuselage Bottom (2 attachment points) |
20070222 00005858 |
330 | Nose Gear Axle points to the: | Left |
20070222 00005859 |
331 | Nose Gear Vertical Distance of Axle from Fuselage: | 6.5 in. (165 mm) |
20070222 00005860 |
332 | Nose Gear Wheel Quantity: | 2 |
20070222 00005861 |
333 | Nose Gear Wheel Tire Material: | Rubber |
20070222 00005862 |
334 | Nose Gear Wheel Hub Material: | Plastic |
20070222 00005863 |
335 | Nose Gear Wheel Diameter: | 1.969 in. (50 mm) |
20070222 00005864 |
336 | Nose Gear Wheel Treaded: | Yes Regular |
20070222 00005865 |
337 | Nose Gear Wheel Pant: | No |
20070222 00005866 |
338 | Nose Gear Retract Ready: | No |
20070222 00005867 |
339 | Nose Gear Retract Possible: | No. Not without major modifications |
20070222 00005868 |
340 | Nose Gear Steerable: | Yes |
20070222 00005869 |
341 | Nose Gear Steers from: | Left Side |
20070222 00005870 |
342 | Please Note: | The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below. |
20070222 00005871 |
344 | Part#: | VMA-F690XNGB |
20070222 00004439 |
355 | Nose Gear Material: | Wire and Functional Oleo Tubes |
20070126 00004450 |
356 | Nose Gear Shock Absorbing: | Yes. Shock Absorption via Functional Oleo Struts (2) |
20070126 00004453 |
357 | Nose Gear Strut (Functional Oleo) Provided: | Yes |
20070126 00004454 |
358 | Nose Gear Strut (Functional Oleo) Pre-Assembled: | Yes |
20070126 00004455 |
359 | Nose Gear Length from Axle to Oleo Scissor Hinge Center Pin: | 1.02 in. (26 mm) |
20070126 00004451 |
360 | Nose Gear Length above Oleo Scissor Hinge Center Pin: | 6.81 in. (173 mm) |
20070126 00004452 |
361 | Nose Gear Wire Diameter: | .197 in. (5.000 mm) |
20070121 00004456 |
362 | Nose Gear Shaped by Factory: | Yes |
20070121 00004457 |
363 | Nose Gear Axle Provided: | Yes |
20070121 00004458 |
364 | Nose Gear Collars Provided: | Yes 1 |
20070121 00004459 |
365 | Nose Gear Weight (without wheel): | .32 lbs (146 g). Please See Note |
20070306 00004460 |
The weight of the nose gear does not include the weight of wheel. | |||
369 | Main Gear Included: | Yes. 1 Right and 1 Left |
20070222 00005873 |
370 | Main Gear Stance between center of wheels: | 9.69 in. (246 mm) |
20070222 00005874 |
371 | Main Gear Mounted to: | Fuselage |
20070222 00005875 |
372 | Main Gear Axles point: | Outboard |
20070222 00005876 |
373 | Main Gear Vertical Distance of Axle from Fuselage: | 4.61 in. (117 mm) |
20070222 00005877 |
374 | Main Gear Wheel Quantity: | 2 |
20070222 00005878 |
375 | Main Gear Wheel Tire Material: | Rubber |
20070222 00005879 |
376 | Main Gear Wheel Hub Material: | Metal |
20070222 00005880 |
377 | Main Gear Wheel Diameter: | 3.15 in. (80 mm) |
20070222 00005881 |
378 | Main Gear Wheels Treaded: | Yes Regular |
20070222 00005882 |
379 | Main Gear Wheel Pants: | No |
20070222 00005883 |
380 | Main Gear Retract Ready: | No |
20070222 00005884 |
381 | Main Gear Retract Possible: | No. Not without major modifications |
20070222 00005885 |
382 | Please Note: | The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below. |
20070222 00005886 |
384 | Part#: | VMA-F690XMGB |
20070222 00004470 |
396 | Main Gear Material: | Wire and Functional Oleo Tubes |
20070122 00004482 |
397 | Main Gear Shock Absorption: | Yes. Shock Absorption via Functional Oleo Struts (2) |
20070126 00004487 |
398 | Main Gear Struts (Functional Oleo) Provided: | Yes |
20070126 00004488 |
399 | Main Gear Struts (Functional Oleo) Pre-Assembled: | Yes |
20070126 00004489 |
400 | Main Gear Length from Axle to Oleo Scissor Hinge Center Pin: | .85 in. (21.5 mm) |
20070126 00004483 |
401 | Main Gear Length from Oleo Scissor Hinge Center Pin to Torque Segment of wire parallel to Fuselage: | 4.02 in. (102 mm) |
20070126 00004484 |
402 | Main Gear Length of Torgue Segment of wire parallel to Fuselage: | 3.50 in. (89 mm) |
20070126 00004485 |
403 | Main Gear Length of Torgue Segment inside and perpendicular to Fuselage: | .87 in. (22 mm) |
20070126 00004486 |
404 | Main Gear Wire Diameter: | .197 in. (5.000 mm) |
20070122 00004490 |
405 | Main Gear Shaped by Factory: | Yes |
20070122 00004491 |
406 | Main Gear Axles Provided: | Yes 2 as part of main gear |
20070122 00004492 |
407 | Main Gear Collars Provided: | No. The axle captures the wheel and a set screw secures the axle to the strut |
20070122 00004493 |
408 | Main Gear Weight (without wheels): | .36 lbs (162 g). Please See Note |
20070122 00004494 |
The weight of the main gear does not include the weight of wheels. |
454 | RADIO SYSTEM | Back to TOP |
20070222 00005901 |
459 | Radio Complete System Factory Installed: | No. Radio System NOT Included |
20070222 00005906 |
460 | Radio Receiver Installed: | No. Receiver NOT Included |
20070222 00005907 |
461 | Radio Servos Installed: | No. Servos NOT Included |
20070222 00005908 |
462 | Radio for Basic Remote Control of this product: | Analog or Computer 4 Channels with 7 Servos |
20070222 00005909 |
463 | Radio for Basic Remote Control - Servo Usage: | 1 for Throttle, 2 for Rudder, 2 for Elevator, 2 for Ailerons |
20070222 00005910 |
464 | Radio for Basic Remote Control - Additional Wiring: | 3 Aileron 24 in Extensions, 1 Y-Harness for Ailerons, 1 Y for Rudder, 1 Y for Elevator |
20070222 00005911 |
468 | Radio with Flaperon Function: | Computer 5 Channels with 7 Servos |
20070222 00005915 |
469 | Radio with Flaperon Function - Servo Usage: | 1 for Throttle, 2 for Rudder, 2 for Elevator, 2 for Flaperons |
20070222 00005916 |
470 | Radio with Flaperon Function - Additional Wiring: | 4 Aileron 24 in. Extensions, 1 Y-Harness for Rudder, 1 Y for Elevator |
20070222 00005917 |
474 | Radio with Flap Function: | Analog or Computer 6 Channels with 9 Servos |
20070222 00005921 |
475 | Radio with Flap Function - Servo Usage: | 1 for Throttle, 2 for Rudder, 2 for Elevator, 2 for Ailerons, 2 for Flaps |
20070222 00005922 |
476 | Radio with Flap Function - Additional Wiring: | 3 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y-Harness for Ailerons, 1 Y for Flaps, 1Y for Rudder, 1 Y for Elevator |
20070222 00005923 |
480 | Radio with Flaperons + Flaps: | Computer 6 Channels with 9 Servos |
20070222 00005927 |
481 | Radio with Flaperons + Flaps - Servo Usage: | 1 for Throttle, 2 for Rudder, 2 for Elevator, 2 for Flaperons, 2 for Flaps |
20070222 00005928 |
482 | Radio with Flaperons + Flaps - Additional Wiring: | 4 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y-Harness for Ailerons, 1 Y for Flaps, 1 Y for Rudder, 1 Y for Elevator |
20070222 00005929 |
489 | SERVO MOUNTING | Back to TOP |
20070222 00005936 |
494 | Primary Location for Servos: | In Servo Bay near aft end of Fuselage (accessible via bottom hatch) |
20070222 00005941 |
495 | Servo Mounting Method at Primary Location: | Tray |
20070222 00005942 |
496 | Primary Servo Tray Included: | Yes |
20070222 00005943 |
497 | Primary Servo Tray Universal: | Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech |
20070222 00005944 |
498 | Primary Servo Tray Adjustable: | No |
20070222 00005945 |
499 | Primary Servo Tray Material: | Wood |
20070222 00005946 |
500 | Primary Servo Tray Number of Servos: | 5 |
20070222 00005947 |
501 | Primary Servo Tray hold Servos for: | Elevators (2), Rudders (2) and Throttle |
20070222 00005948 |
502 | Primary Servo Tray provide for Switch Mount: | No |
20070222 00005949 |
503 | Secondary Location for Servos: | In Wings |
20070222 00005950 |
504 | Servo Mounting Method at Secondary Location: | Rails |
20070222 00005951 |
505 | Secondary Servo Rails Included: | Yes |
20070222 00005952 |
506 | Secondary Servo Rails Universal: | Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech |
20070222 00005953 |
507 | Secondary Servo Rails Adjustable: | No |
20070222 00005954 |
508 | Secondary Servo Rails Material: | Wood |
20070222 00005955 |
509 | Secondary Servo Rails Number of Servos: | 2 |
20070222 00005956 |
510 | Secondary Servo Rails hold Servos for: | Ailerons |
20070222 00005957 |
511 | Secondary Servo Rails provide for Switch Mount: | No |
20070222 00005958 |
512 | Tertiary Location for Servos: | In Wings |
20070222 00005959 |
513 | Servo Mounting Method at Tertiary Location: | Rails |
20070222 00005960 |
514 | Tertiary Servo Rails Included: | Yes |
20070222 00005961 |
515 | Tertiary Servo Rails Universal: | Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech |
20070222 00005962 |
516 | Tertiary Servo Rails Adjustable: | No |
20070222 00005963 |
517 | Tertiary Servo Rails Material: | Wood |
20070222 00005964 |
518 | Tertiary Servo Rails Number of Servos: | 2 |
20070222 00005965 |
519 | Tertiary Servo Rails hold Servos for: | Flaps |
20070222 00005966 |
520 | Tertiary Servo Rails provide for Switch Mount: | No |
20070222 00005967 |
552 | SET UP | Back to TOP |
20070222 00005999 |
557 | CG Measured with Respect To: | Distance Back from Wing Leading Edge adjacent to side of Fuselage with No Fuel. (See Diagram in Assembly & Operations Manual) |
20070222 00006004 |
558 | CG Location for First Flight: | 5.51 in. (140 mm) |
20070222 00006005 |
559 | CG Location Nominal: | 5.71 in. (145 mm) |
20070222 00006006 |
560 | CG Location Max: | 5.91 in. (150 mm) |
20070222 00006007 |
562 | Thrust Line Horizontal: | Coincident with midway point between the two factory installed T-bar engine mounts (mounts are rotated 90 degrees). |
20070222 00006009 |
563 | Thrust Line Vertical: | Up & Down through Center of Firewall |
20070222 00006010 |
564 | Rudder Movement Min & First Flight Left: | .630 in. (16 mm) |
20070222 00006011 |
565 | Rudder Movement Min & First Flight Right: | .630 in. (16 mm) |
20070222 00006012 |
566 | Rudder Movement Min & First Flight Total Left & Right: | 1.260 in. (32 mm) |
20070222 00006013 |
567 | Rudder Movement Maximum Left: | .984 in. (25 mm) |
20070222 00006014 |
568 | Rudder Movement Maximum Right: | .984 in. (25 mm) |
20070222 00006015 |
569 | Rudder Movement Maximum Total Left & Right: | 1.969 in. (50 mm) |
20070222 00006016 |
570 | Elevator Movement Min & First Flight Up: | .315 in. (8 mm) |
20070222 00006017 |
571 | Elevator Movement Min & First Flight Down: | .315 in. (8 mm) |
20070222 00006018 |
572 | Elevator Movement Min & First Flight Total Up & Down: | .630 in. (16 mm) |
20070222 00006019 |
573 | Elevator Movement Maximum Up: | .472 in. (12 mm) |
20070222 00006020 |
574 | Elevator Movement Maximum Down: | .472 in. (12 mm) |
20070222 00006021 |
575 | Elevator Movement Maximum Total Up & Down: | .945 in. (24 mm) |
20070222 00006022 |
576 | Aileron Movement Min & First Flight Right Up & Left Down: | .315 in. (8 mm) |
20070222 00006023 |
577 | Aileron Movement Min & First Flight Left Up & Right Down: | .315 in. (8 mm) |
20070222 00006024 |
578 | Aileron Movement Min & First Flight Total Up and Down: | .630 in. (16 mm) |
20070222 00006025 |
579 | Aileron Movement Maximum Right Up & Left Down: | .472 in. (12 mm) |
20070222 00006026 |
580 | Aileron Movement Maximum Left Up & Right Down: | .472 in. (12 mm) |
20070222 00006027 |
581 | Aileron Movement Maximum Total Up & Down: | .945 in. (24 mm) |
20070222 00006028 |
582 | Flaperon Movement Min & First Flight Down: | None. Minimize to Neutral |
20070222 00006029 |
583 | Flaperon Movement Maximum Down: | .24 in. (6.00 mm) |
20070222 00006030 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component | |||
584 | Flap Movement Min & First Flight Down: | None. Minimize to Neutral |
20070222 00006031 |
585 | Flap Movement Maximum Down: | .689 in. (17.50 mm) |
20070222 00006032 |
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component |
589 | STABILIZER - HORIZONTAL & ELEVATOR | Back to TOP |
20070222 00006036 |
The ("Horiz") Horizontal Stabilizer ("Stab") consists of the horizontal tailplane that is attached to the fuselage and the elevator which is the moveable control surface attached to the trailing edge of the tailplane. | |||
591 | Part#: | VMA-F690BTH |
20070222 00005422 |
594 | Dimensions: | Please See Note |
20070222 00005425 |
The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
595 | Terminology: | Please See Note |
20070222 00005426 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
598 | Horiz Stabilizer Location: | Horizontal Stabilizer slot in aft end of Fuselage |
20070222 00005429 |
599 | Horiz Stabilizer Span Tip to Tip: | 32.48 in. (825 mm) |
20070222 00005430 |
600 | Horiz Stabilizer Span (effective): | 32.32 in. (821 mm) |
20070222 00005431 |
601 | Horiz Stabilizer Chord Maximum: | 7.76 in. (197 mm) |
20070222 00005432 |
602 | Horiz Stabilizer Chord at outboard end of Elevator: | 4.80 in. (122 mm) |
20070222 00005433 |
603 | Horiz Stabilizer Chord (effective): | 6.28 in. (160 mm) |
20070222 00005434 |
604 | Horiz Stabilizer Area: | 202.97 sq in. (1309.50 sq cm) |
20070222 00005435 |
605 | Horiz Stabilizer Area relative to Wing Area: | 27.42 % |
20070222 00005436 |
606 | Horiz Stabilizer Width of Saddle: | 9.02 in. (229 mm) |
20070222 00005437 |
607 | Horiz Stabilizer Length of Saddle: | 7.76 in. (197 mm) |
20070222 00005438 |
608 | Horiz Stabilizer Area of Saddle: | 69.93 sq in. (451 sq cm) |
20070222 00005439 |
609 | Horiz Stabilizer Area without Saddle: | 133.05 sq in. (858.37 sq cm) |
20070222 00005440 |
610 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 23.22 % |
20070222 00005441 |
611 | Horiz Stabilizer Airfoil Shape: | Slab |
20070222 00005442 |
612 | Horiz Stabilizer Thickness Maximum: | .394 in. (10.0 mm) |
20070222 00005443 |
616 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20070222 00005447 |
617 | Horiz Stabilizer Taper along Trailing Edge: | No |
20070222 00005448 |
618 | Horiz Stabilizer Material: | Balsa |
20070222 00005449 |
619 | Horiz Stabilizer Construction Method: | Solid |
20070222 00005450 |
620 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005451 |
626 | Horiz Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070222 00005457 |
627 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070222 00005458 |
628 | Horiz Stabilizer Requires Struts: | No |
20070222 00005459 |
629 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070222 00005460 |
630 | Horiz Stabilizer Elevator Quantity: | 2 (i.e. split into left & right halves) |
20070222 00005461 |
631 | Horiz Stabilizer Elevator Length (effective): | 13.62 in. (346 mm) |
20070222 00005462 |
Horiz Stabilizer Elevator Length is 346 mm at the hinge line (closest to the wing). The Elevator Length is 346 mm at the trailing edge. | |||
632 | Horiz Stabilizer Elevator Chord (effective): | 2.72 in. (69 mm) |
20070222 00005463 |
Horiz Stabilizer Elevator Chord is 69 mm at the inboard end (closest to the fuselage). The Elevator Chord is 69 mm at the outboard end. | |||
633 | Horiz Stabilizer Elevator Area: | 74.01 sq in. (477 sq cm) |
20070222 00005464 |
634 | Horiz Stabilizer Elevator Area relative to Wing Area: | 10.00 % |
20070222 00005465 |
635 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | 12.92 % |
20070222 00005466 |
636 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | 36.46 % |
20070222 00005467 |
637 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | 55.63 % |
20070222 00005468 |
638 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070222 00005469 |
639 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070222 00005470 |
640 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070222 00005471 |
641 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070222 00005472 |
642 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070222 00005473 |
643 | Horiz Stabilizer Elevator Servo Required: | Yes 1 Standard |
20070222 00005474 |
644 | Horiz Stabilizer Elevator Servo Location: | In servo bay located in bottom of aft end of Fuselage |
20070222 00005475 |
645 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070222 00005476 |
649 | Horiz Stabilizer Color Top Schema: | Blue Angels |
20070222 00005480 |
650 | Horiz Stabilizer Color Top Main: | Blue |
20070222 00005481 |
651 | Horiz Stabilizer Color Top Trim: | Yellow at Tips. Very small black elements |
20070222 00005482 |
652 | Horiz Stabilizer Color Top Lines: | Gray |
20070222 00005483 |
653 | Horiz Stabilizer Color Top Rivets: | 3D Gray |
20070222 00005484 |
654 | Horiz Stabilizer Color Top vs Bottom: | Very Similar |
20070222 00005485 |
655 | Horiz Stabilizer Color Bottom Schema: | Blue Angels |
20070222 00005486 |
656 | Horiz Stabilizer Color Bottom Main: | Blue |
20070222 00005487 |
657 | Horiz Stabilizer Color Bottom Trim: | Yellow at Tips. Very small black elements |
20070222 00005488 |
658 | Horiz Stabilizer Color Bottom Lines: | Gray |
20070222 00005489 |
659 | Horiz Stabilizer Color Bottom Rivets: | 3D Gray |
20070222 00005490 |
660 | Horiz Stabilizer Weight: | .407 lbs (185 g) |
20070222 00005491 |
664 | STABILIZER - VERTICAL & RUDDER | Back to TOP |
20070222 00006038 |
The ("Vert") Vertical Stabilizer ("Stab") consists of the vertical tailplane that is attached to the fuselage and the rudder which is the moveable control surface attached to the trailing edge of the vertical tailplane. In the vast majority of cases there is one Vertical Stabilizer per aircraft, in some relatively rare cases there are two. | |||
666 | Part#: | VMA-F690BTV |
20070222 00005495 |
671 | Source Data - Horiz Stabilizer Elevator Area: | 74.01 sq in. (477 sq cm) |
20070222 00005500 |
672 | Dimensions: | Please See Note |
20070222 00005501 |
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments. | |||
673 | Terminology: | Please See Note |
20070222 00005502 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
676 | Vertical Stabilizer Location: | Vertical Angled Slots in "Shoulders" of aft end of Fuselage |
20070222 00005505 |
677 | Vertical Stabilizer Quantity: | 2 |
20070222 00005506 |
678 | Vertical Stabilizer Height Fuse to End Of Tip: | 11.42 in. (290 mm) |
20070222 00005507 |
679 | Vertical Stabilizer Height (effective): | 8.78 in. (223 mm) |
20070222 00005508 |
20070128/20:26/kps... It is important when attaching the vertical stabiliers to the fuselage to ensure that the rudders are able to fully deflect without coming into contact with the fuselage. The aforementioned "Fuse to End of Tip" and "Vertical Stabilizer Height (effective)" specifications are guidelines only. Full deflection of the rudders is of paramount consideration. | |||
680 | Vertical Stabilizer Chord Maximum: | 11.81 in. (300 mm) |
20070222 00005509 |
681 | Vertical Stabilizer Chord at tip end of Rudder: | 6.69 in. (170 mm) |
20070222 00005510 |
682 | Vertical Stabilizer Chord (effective): | 8.46 in. (215 mm) |
20070222 00005511 |
683 | Vertical Stabilizer Area: | 148.63 sq in. (958.90 sq cm) |
20070222 00005512 |
684 | Vertical Stabilizer Area relative to Wing Area: | 20.08 % |
20070222 00005513 |
685 | Vertical Stabilizer Area relative to Wing Area without wing saddle: | 25.94 % |
20070222 00005514 |
686 | Vertical Stabilizer Airfoil Shape: | Slab |
20070222 00005515 |
687 | Vertical Stabilizer Thickness Maximum: | .390 in. (9.9 mm) |
20070222 00005516 |
688 | Vertical Stabilizer Taper along Leading Edge: | Yes |
20070222 00005517 |
689 | Vertical Stabilizer Taper along Trailing Edge: | Yes |
20070222 00005518 |
690 | Vertical Stabilizer Material: | Balsa |
20070222 00005519 |
691 | Vertical Stabilizer Construction Method: | Solid |
20070222 00005520 |
692 | Vertical Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005521 |
697 | Vertical Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070222 00005526 |
698 | Vertical Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070222 00005527 |
699 | Vertical Stabilizer Requires Struts: | No |
20070222 00005528 |
700 | Vertical Stabilizer Rudder Factory Installed: | Yes |
20070222 00005529 |
701 | Vertical Stabilizer Rudder Quantity: | 2 (i.e. dual rudders) |
20070222 00005530 |
702 | Vertical Stabilizer Rudder Length (effective): | 7.56 in. (192 mm) |
20070222 00005531 |
Vertical Stabilizer Rudder Length is 192 mm at the hinge line. The Rudder Length is 192 mm at the trailing edge. | |||
703 | Vertical Stabilizer Rudder Chord (effective): | 2.26 in. (58 mm) |
20070325 00005532 |
The Vertical Stablizer Rudder Chord is 45 mm at the tip end. The Rudder Chord is 70 mm at the Root end. | |||
704 | Vertical Stabilizer Rudder Area: | 34.22 sq in. (220.80 sq cm) |
20070325 00005533 |
705 | Vertical Stabilizer Rudder Area relative to Wing Area: | 4.62 % |
20070325 00005534 |
706 | Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle: | 5.97 % |
20070325 00005535 |
707 | Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area: | 23.03 % |
20070325 00005536 |
708 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area: | 16.86 % |
20070325 00005537 |
709 | Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle: | 25.72 % |
20070325 00005538 |
710 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area: | 46.24 % |
20070325 00005539 |
711 | Vertical Stabilizer Rudder Hinges per Rudder: | 2 |
20070222 00005540 |
712 | Vertical Stabilizer Rudder Hinge Type: | Flexible Live Low Gap |
20070222 00005541 |
713 | Vertical Stabilizer Rudder Hinge Material: | Proprietary Super Strong |
20070222 00005542 |
714 | Vertical Stabilizer Rudder Hinge Adhesive: | Cyanoacrylate |
20070222 00005543 |
715 | Vertical Stabilizer Rudder Hinges Pinned: | Yes |
20070222 00005544 |
716 | Vertical Stabilizer Rudder Servo Required: | Yes 2 Standard |
20070222 00005545 |
717 | Vertical Stabilizer Rudder Servo Location: | In servo bay located in bottom of aft end of Fuselage |
20070222 00005546 |
718 | Vertical Stabilizer Rudder Servo Mounting Method: | Tray (Wood) |
20070222 00005547 |
722 | Vertical Stabilizer Rudder Actuation Rod: | Yes. Along hinge line and extending down into fuselage to connect to servo via steering arm |
20070222 00005551 |
723 | Vertical Stabilizer Color Outboard Schema: | Yellow tips, rectangle and text on Blue |
20070222 00005552 |
724 | Vertical Stabilizer Color Outboard Main: | Blue |
20070222 00005553 |
725 | Vertical Stabilizer Color Outboard Trim: | Yellow with very small Black elements |
20070222 00005554 |
726 | Vertical Stabilizer Color Outboard Lines: | Gray |
20070222 00005555 |
727 | Vertical Stabilizer Color Outboard Rivets: | 3D Gray and Gray graphics |
20070222 00005556 |
728 | Vertical Stabilizer Color Outboard vs Inboard: | Different. No Yellow rectangle inboard |
20070222 00005557 |
729 | Vertical Stabilizer Color Inboard Schema: | Blue Angels |
20070222 00005558 |
730 | Vertical Stabilizer Color Inboard Main: | Blue |
20070222 00005559 |
731 | Vertical Stabilizer Color Inboard Trim: | Black. Very Small Elements |
20070222 00005560 |
732 | Vertical Stabilizer Color Inboard Lines: | Gray |
20070222 00005561 |
733 | Vertical Stabilizer Color Inboard Rivets: | 3D Gray and Gray graphics |
20070222 00005562 |
734 | Vertical Stabilizer Weight: | .374 lbs (170 g) |
20070222 00005563 |
738 | WEIGHTS | Back to TOP |
20070429 00006040 |
Please note the following convention for weights: When referring to the weight of a model without radio or engine (motor) (i.e. "empty"), the range between the Min and Max weights for the empty model reflect normal variations in production weights associated with material densities. When referring to the weight of a model complete with radio and engine (motor), the Min weight reflects the sum of the Min weight of the empty model plus the weight of the minimum size engine (motor) specified for the model plus the weight of a radio system using the minimum number of channels and servos required for basic remote control of this product. When referring to the weight of a model complete with radio and engine (motor), the Max weight reflects the sum of the Max weight of the empty model plus the weight of the maximum size engine (motor) specified for the model plus the weight of a radio system using the maximum number of channels and servos specified for this product. | |||
743 | Weight of Model Only without Radio or Engine Min: | 7.13 lbs (3242.72 g) |
20070222 00006045 |
744 | Weight of Model Only without Radio or Engine Max: | 7.49 lbs (3404.86 g) |
20070222 00006046 |
745 | Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min: | 10.01 lbs (4549.22 g) |
20070222 00006047 |
746 | Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max: | 10.61 lbs (4821.36 g) |
20070222 00006048 |
749 | Weight Flying with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: | 10.73 lbs (4879.22 g) |
20070222 00006051 |
750 | Weight Flying with Radio & 2 stroke Engine & 11.65 (330ml) Fuel Max: | 11.33 lbs (5151.36 g) |
20070222 00006052 |
756 | WING | Back to TOP |
20070222 00006058 |
758 | Part#: | VMA-F690BW |
20070222 00005567 |
759 | Dimensions: | Please See Note |
20070222 00005568 |
The dimensions of the Wing include the mounting Saddle plus any Ailerons, Flaperons, Flaps or other control surfaces unless otherwise noted. The Aileron Quantity is the number of aileron segments. This is usually 2 with one aileron on the right wing panel plus one aileron on the left wing panel. The Aileron Length is expressed as the length per aileron segment. The Aileron Area is expressed as the total of the area of all aileron segments. Flaperons by design have the same specifications as ailerons. Flap dimensions are denoted in the same manner as ailerons. Flap Quantity is usually 2 (one on the left wing panel plus one on the right wing panel). Flap Length is the length of each flap segment and Flap Area is expressed as the total of the area of all flap segments. | |||
760 | Terminology: | Please See Note |
20070222 00005569 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
763 | Wing Location: | Attached to sides of Fuselage |
20070222 00005572 |
764 | Wing Span Tip to Tip: | 57.24 in. (1454 mm) |
20070222 00005573 |
765 | Wing Span (effective): | 57.24 in. (1454 mm) |
20070222 00005574 |
766 | Wing Chord at Root: | 17.56 in. (446 mm) |
20070222 00005575 |
767 | Wing Chord at outboard end of Aileron: | 8.31 in. (211 mm) |
20070222 00005576 |
768 | Wing Chord (effective): | 12.93 in. (329 mm) |
20070222 00005577 |
769 | Wing Area: | 740.34 sq in. (4776.39 sq cm) |
20070222 00005578 |
770 | Wing Width of Saddle: | 9.53 in. (242 mm) |
20070222 00005579 |
771 | Wing Length of Saddle: | 17.56 in. (446 mm) |
20070222 00005580 |
772 | Wing Area of Saddle only: | 167.29 sq in. (1079.32 sq cm) |
20070222 00005581 |
773 | Wing Area without Saddle: | 573.05 sq in. (3697.07 sq cm) |
20070222 00005582 |
774 | Wing Airfoil Shape: | Symmetrical |
20070222 00005583 |
776 | Wing Dihedral at Center: | 0 degrees |
20070222 00005585 |
778 | Wing Taper along Leading Edge: | Yes |
20070222 00005587 |
779 | Wing Taper Along Trailing Edge: | Yes |
20070222 00005588 |
780 | Wing Thickness Maximum: | 1.81 in. (46 mm) |
20070222 00005589 |
781 | Wing Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070222 00005590 |
782 | Wing Construction Method: | Built Up |
20070222 00005591 |
783 | Wing Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005592 |
784 | Wing Sheeted Fully: | Yes |
20070222 00005593 |
789 | Wing Plugs In to Fuselage: | Yes |
20070222 00005598 |
790 | Wing Front attaches to Fuselage with: | Bolt, Washer & Nut |
20070222 00005599 |
791 | Wing Back attaches to Fuselage with: | Bolt, Washer & Nut |
20070222 00005600 |
792 | Wing Requires Struts: | No |
20070222 00005601 |
793 | Wing Spar Joiner Quantity: | 2 |
20070222 00005602 |
794 | Wing Spar Joiner Material: | Aluminum Tube |
20070222 00005603 |
795 | Wing Spar Joiner Length: | 26.77 in. (680 mm) |
20070222 00005604 |
796 | Wing Spar Joiner Width: | .576 in. (14.63 mm) |
20070222 00005605 |
798 | Wing Spar Joiner (Secondary) Material: | Aluminum Tube |
20070222 00005607 |
799 | Wing Spar Joiner (Secondary) Length: | 20.87 in. (530 mm) |
20070222 00005608 |
800 | Wing Spar Joiner (Secondary) Width: | .576 in. (14.63 mm) |
20070222 00005609 |
805 | Wing Ailerons Factory Installed: | Yes |
20070222 00005614 |
806 | Wing Ailerons Quantity: | 2 |
20070222 00005615 |
807 | Wing Aileron Type: | Semi-Strip (2) |
20070222 00005616 |
808 | Wing Aileron Length per Aileron (effective): | 9.80 in. (249 mm) |
20070222 00005617 |
809 | Wing Aileron Chord (effective): | 2.421 in. (62 mm) |
20070222 00005618 |
Wing Aileron Chord tapers from 71 mm at the inboard end (closest to the fuselage) to 52 mm at the outboard end. | |||
810 | Wing Aileron Area: | 47.47 sq in. (306 sq cm) |
20070222 00005619 |
811 | Wing Aileron Area relative to Wing Area: | 6.41 % |
20070222 00005620 |
812 | Wing Aileron Area relative to Wing Area without wing saddle: | 8.28 % |
20070222 00005621 |
813 | Wing Aileron Hinges per Aileron: | 3 |
20070222 00005622 |
814 | Wing Aileron Hinge Type: | Flexible Live Low Gap |
20070222 00005623 |
815 | Wing Aileron Hinge Material: | Proprietary Super Strong |
20070222 00005624 |
816 | Wing Aileron Hinge Adhesive: | Cyanoacrylate |
20070222 00005625 |
817 | Wing Aileron Hinges Pinned: | Yes |
20070222 00005626 |
818 | Wing Aileron Servo Required: | Yes 2 Standard |
20070222 00005627 |
819 | Wing Aileron Servo Location: | Bottom of Wing aligned approximately with the inboard end of the aileron. |
20070222 00005628 |
820 | Wing Aileron Servo Rails: | Yes in Servo Cavity |
20070222 00005629 |
822 | Wing Aileron Servo Wiring Tube: | Yes |
20070222 00005631 |
823 | Wing Ailerons Flaperon Ready with Computer Radio: | Yes |
20070222 00005632 |
824 | Wing Flaps Factory Installed: | Yes |
20070222 00005633 |
825 | Wing Flaps Mandatory: | No. Can be locked at neutral position |
20070222 00005634 |
826 | Wing Flaps Quantity: | 2 |
20070222 00005635 |
827 | Wing Flaps useable as Spoilers or Speed Brakes by deflecting upwards: | No |
20070426 00005636 |
828 | Wing Flap Length per Flap (effective): | 12.60 in. (320 mm) |
20070222 00005637 |
829 | Wing Flap Chord (effective): | 3.307 in. (84 mm) |
20070222 00005638 |
Wing Flap Chord tapers from 73 mm at the inboard end (closest to the fuselage) to 95 mm at the outboard end. | |||
830 | Wing Flaps Area: | 83.33 sq in. (538 sq cm) |
20070222 00005639 |
831 | Wing Flap Area relative to Wing Area: | 11.26 % |
20070222 00005640 |
832 | Wing Flap Area relative to Wing Area without wing saddle: | 14.54 % |
20070222 00005641 |
833 | Wing Flap Hinges per Flap: | 3 |
20070222 00005642 |
834 | Wing Flap Hinge Type: | Flexible Live Low Gap |
20070222 00005643 |
835 | Wing Flap Hinge Material: | Proprietary Super Strong |
20070222 00005644 |
836 | Wing Flaps Hinge Adhesive: | Cyanoacrylate |
20070222 00005645 |
837 | Wing Flap Hinges Pinned: | Yes |
20070222 00005646 |
838 | Wing Flap Servo Required: | Yes 2 Standard |
20070222 00005647 |
839 | Wing Flap Servo Location: | Bottom of Wing aligned approximately with the inboard end of the flap |
20070222 00005648 |
840 | Wing Flap Servo Rails: | Yes in Servo Cavity |
20070222 00005649 |
842 | Wing Flap Servo Wiring Tube: | Yes |
20070222 00005651 |
844 | Wing Color Top Schema: | Blue Angels |
20070222 00005653 |
845 | Wing Color Top Main: | Blue |
20070222 00005654 |
846 | Wing Color Top Trim: | Gray leading edges and Yellow tips |
20070222 00005655 |
847 | Wing Color Top Lines: | Gray |
20070222 00005656 |
848 | Wing Color Top Rivets: | Gray 3D and Gray graphics |
20070222 00005657 |
849 | Wing Color Top vs Bottom: | Very Similar |
20070222 00005658 |
850 | Wing Color Bottom Schema: | Blue Angels |
20070222 00005659 |
851 | Wing Color Bottom Main: | Blue |
20070222 00005660 |
852 | Wing Color Bottom Trim: | Gray leading edges and Yellow tips |
20070222 00005661 |
853 | Wing Color Bottom Lines: | Gray |
20070222 00005662 |
854 | Wing Color Bottom Rivets: | Gray 3D and Black graphics |
20070222 00005663 |
855 | Wing Weight: | 1.49 lbs (676 g). Please See Note |
20070222 00005664 |
The weight of the Wing is as it was when it is removed from the shipping box. This weight does NOT include the weight associated with any adhesives, spar joiners or other weight associated with end user assembly. |
859 | WING LOADING | Back to TOP |
20070425 00006060 |
Please note the following convention for Wing Loading: When we say Min we mean the wing loading to be expected when using the minimum size engine (motor) specified for this model and the minimum number of servos specified for this model. When we say Max we mean the wing loading to be expected when using the maximum size engine (motor) specified for this model and the maximum number of servos specified for this model. | |||
864 | Wing Area: | 740.34 sq in. (4776.39 sq cm) |
20070222 00006065 |
865 | Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Min: | 31.15 oz/sq ft (.95 g/sq cm) |
20070222 00006066 |
866 | Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Max: | 33.01 oz/sq ft (1.01 g/sq cm) |
20070222 00006067 |
867 | Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: | 33.41 oz/sq ft (1.02 g/sq cm) |
20070222 00006068 |
868 | Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max: | 35.27 oz/sq ft (1.08 g/sq cm) |
20070222 00006069 |
874 | APPENDICES | Back to TOP |
20070222 00006075 |
The Appendice tables below provide additional information associated with this product, it's components, it's packaging or other related information. |
875 | PACKING LIST | Back to TOP |
20070222 00006076 |
880 | Major Component: | 1 Fuselage with pre-installed Control Rods, Servo Tray and Engine Mounts. |
20070222 00006081 |
881 | Major Component: | 1 Wing left |
20070222 00006082 |
882 | Major Component: | 1 Wing right |
20070222 00006083 |
883 | Major Component: | 2 Horizontal Stabilizers with pre-installed Elevators |
20070222 00006084 |
884 | Major Component: | 2 Vertical Stabilizers with pre-installed Rudders |
20070222 00006085 |
886 | Major Component: | 1 Main Landing Gear Bag |
20070222 00006087 |
887 | Major Component: | 1 Nose Gear Bag (may be shipped in Main Gear Parts Bag) |
20070222 00006088 |
888 | Major Component: | 1 Master Bag of Hardware |
20070222 00006089 |
889 | Major Component: | 1 Documentation Set |
20070222 00006090 |
890 | Major Component: | Drop Tank (Dummy) and Screws |
20070222 00006091 |
891 | Major Component: | Missile Set (Dummy) |
20070222 00006092 |
892 | Major Component: | Wing Joiner Tubes (2) |
20070222 00006093 |
893 | Major Component: | Canopy |
20070222 00006094 |
894 | Major Component: | Spinner |
20070222 00006095 |
898 | Master Bag contains: | 1 Wing Parts Bag |
20070222 00006099 |
899 | Master Bag contains: | 1 Control Horn Parts Bag |
20070222 00006100 |
906 | Master Bag contains: | 1 Miscellaneous Parts Bag (may be packed mixed with items in Spare Parts Bag) |
20070222 00006107 |
907 | Master Bag contains: | 1 Spare Parts Bag |
20070222 00006108 |
908 | Master Bag contains: | 1 Fuel Tank with stopper & clunk(s) |
20070222 00006109 |
919 | Wing Parts Bag contains: | 4 Control Horn assemblies (2 for ailerons, 2 for flaps) each consisting of a metal nut, metal bolt & plastic horn, T-nut & bevelled washer |
20070222 00006120 |
921 | Wing Parts Bag contains: | 2 Aileron control rods each with a clevis on each end |
20070222 00006122 |
922 | Wing Parts Bag contains: | 2 Flap control rods each with a clevis on each end |
20070222 00006123 |
926 | Control Horn Parts Bag contains: | 2 Control Horn assemblies (1 for each elevator, 1 for each rudder) each consists of metal nut, metal bolt & plastic horn, T-nut & bevelled washer |
20070222 00006127 |
928 | Main Gear Parts Bag contains: | 1 Main Gear (left) with Functional Oleo Strut, Axle and Wheel |
20070222 00006129 |
929 | Main Gear Parts Bag contains: | 1 Main Gear (right) with Functional Oleo Strut, Axle and Wheel |
20070222 00006130 |
931 | Main Gear Parts Bag contains: | 1 Hex (Allen) wrench for the wheel collars |
20070222 00006132 |
932 | Main Gear Parts Bag contains: | Larger screws to attach the main gear to the fuselage |
20070222 00006133 |
933 | Main Gear Parts Bag contains: | Plastic landing gear straps (white) |
20070222 00006134 |
934 | Main Gear Parts Bag contains: | Small screws for the landing gear straps |
20070222 00006135 |
939 | Nose Gear Parts Bag contains: | 1 Nose Gear with Functional Oleo Strut, Axle and 2 Wheels. |
20070222 00006140 |
940 | Nose Gear Parts Bag contains: | 1 Steering Arm with retaining screw |
20070222 00006141 |
941 | Nose Gear Parts Bag contains: | 1 Wheel Collar |
20070222 00006142 |
962 | Miscellaneous Parts Bag contains: | 2 Rudder Control Arms with Rods & Clevises |
20070222 00006163 |
963 | Spare Parts Bag contains: | 2 Control Horn assembly each consisting of a metal nut, metal bolt and plastic horn, T-nut and bevelled washer |
20070222 00006164 |
965 | Spare Parts Bag contains: | 1 Clevis |
20070222 00006166 |
966 | Spare Parts Bag contains: | 1 Metal bolt (long) with washers and nut |
20070222 00006167 |
967 | Spare Parts Bag contains: | 1 Metal bolt (short) with washers and nut |
20070222 00006168 |
969 | Spare Parts Bag contains: | 3 Extra Clevis Screws |
20070222 00006170 |
970 | Spare Parts Bag contains: | 1 Wood Washer |
20070222 00006171 |
977 | Documentation Set contains: | 1 Assembly and Operations Manual |
20070222 00006178 |
985 | PACKAGING | Back to TOP |
20070222 00006186 |
986 | Dimensions: | Please See Note |
20070222 00006187 |
The Display Box contains the product and is intended for display in a retail or end user environment. The Display Box weight also includes the weight of the protective Shipping Bog. The Shipping Box completely surrounds and contains the Display Box and the product itself. | |||
987 | Terminology: | Please See Note |
20070222 00006188 |
The term "Length" refers to the longest side of a box, "Width" refers to the second longest side and "Height" refers to the shortest side of a box. The term "Girth" refers to the sum of the Width + Width + Height + Height. Think of this as the distance around (i.e. waistline) an object. The term "Length + Girth" refers to the sum of the Length plus the Girth and is used by some carriers for the calculation of size limits. The term "Volume" refers to the multiple of the Length x Width x Height. The term "Density" refers to Weight/Volume. The term "Dimensional Weight" refers to the weight that is calculated for an object assuming a density requirement of X lbs per cubic foot where X is typically in the range of 8 to 15 lbs/cuft. Carriers charge freight based on the larger of the actual Weight or the Dimensional Weight. For light bulky items such as ARF model airplanes the Dimensional Weight is usually the larger and many carriers use this as the basis for shipping charges. Air Shipments always use the Dimensional Weight applicable for Air Shipments. For reference purposes we show Dimensional Weights here for both Ground and Air shipments. | |||
990 | Packaging: | 1 Shipping Box |
20070222 00006191 |
991 | Packaging: | 2 Plywood Shipping Shield |
20070222 00006192 |
992 | Packaging: | 1 Plastic Shipping Bag |
20070222 00006193 |
993 | Packaging: | 1 Display Box |
20070222 00006194 |
994 | Display Box Material: | White Cardboard with Color Label |
20070222 00006195 |
995 | Display Box Weight with Contents: | 22.45 lbs (10204 g) |
20070222 00006196 |
996 | Display Box Size Outside Length: | 61.73 in. (1568 mm) |
20070222 00006197 |
997 | Display Box Size Outside Width: | 20.59 in. (523 mm) |
20070222 00006198 |
998 | Display Box Size Outside Height: | 12.32 in. (313 mm) |
20070222 00006199 |
999 | Display Box Size Outside Length + Width + Height: | 94.65 in. (2404 mm) |
20070222 00006200 |
1000 | Display Box Size Outside Length + Girth: | 127.56 in. (3240 mm) |
20070222 00006201 |
1001 | Display Box Size Outside Volume: | 9.06 cu ft. (.26 cbm) |
20070222 00006202 |
1002 | Display Box Size Outside Density: | 2.48 lbs/cu ft. (40 kg/cbm) |
20070222 00006203 |
1003 | Display Box Label Colors Primary: | Red, White & Black |
20070222 00006204 |
1004 | Display Box Label Coverage Front: | 42.13 x 14.96 in. (1070 380 mm) |
20070222 00006205 |
1005 | Display Box Label Coverage Side A: | 20.87 x 4.33 in. (530 110 mm) |
20070222 00006206 |
1006 | Display Box Label Coverage Side B: | 20.87 x 4.33 in. (530 110 mm) |
20070222 00006207 |
1007 | Display Box Label End Panel A: | 15.55 x 10.63 in. (395 270 mm) |
20070222 00006208 |
1010 | Shipping Box Material: | Brown Cardboard with inner Plywood Shields |
20070222 00006211 |
1011 | Shipping Box Weight with Contents: | 27.15 lbs (12340 g) |
20110302 00006212 |
1012 | Shipping Box Size Outside Length: | 63.07 in. (1602 mm) |
20110302 00006213 |
1013 | Shipping Box Size Outside Width: | 20.59 in. (523 mm) |
20110302 00006214 |
1014 | Shipping Box Size Outside Height: | 12.32 in. (313 mm) |
20110302 00006215 |
1015 | Shipping Box Size Outside Length + Width + Height: | 95.98 in. (2438 mm) |
20110302 00006216 |
1016 | Shipping Box Size Outside Length + Girth: | 128.90 in. (3274 mm) |
20110302 00006217 |
1017 | Shipping Box Size Outside Volume: | 9.26 cu ft. (.26 cbm) |
20110302 00006218 |
1018 | Shipping Box Size Outside Density: | 2.93 lbs/cu ft. (47 kg/cbm) |
20110302 00006219 |
1019 | Shipping Box has a Dimensional Weight of: | 82.49 lbs @ UPS Ground Requirement of 8.91 lbs/cu ft. (per factor of 194.00) |
20110302 00006220 |
1020 | Shipping Box has a Dimensional Weight of: | 96.40 lbs @ UPS Air Requirement of 10.41 lbs/cu ft. (per factor of 166.00) |
20110302 00006221 |
1025 | PRECISION | Back to TOP |
20100217 00006226 |
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice Within the limitations of this Condition of Use and the Liability Disclaimer, the data published here is intended to meet the following standards of precision. | |||
1031 | Units of Measure: | All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial. |
20070106 00003923 |
1032 | In general, measurements are accurate to within: | + - 3% except + - .30 for measurements of magnitude 10.0 or less. |
20070106 00003916 |
1033 | Distances such as length, width, depth, thickness etc are measured to the nearest: | 1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less |
20070106 00003917 |
When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision. | |||
1034 | Weights and Mass are measured to the nearest: | 1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less |
20070106 00003924 |
1035 | Volumes related to fluids are measured to the nearest: | 1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less |
20070106 00003925 |
1036 | Volumes related to non-fluids are measured to the nearest: | .01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less. |
20070106 00003926 |