| 1 | Part#: | VMA-F690BW |
20070222 00005567 |
| 2 | Dimensions: | Please See Note |
20070222 00005568 |
| The dimensions of the Wing include the mounting Saddle plus any Ailerons, Flaperons, Flaps or other control surfaces unless otherwise noted. The Aileron Quantity is the number of aileron segments. This is usually 2 with one aileron on the right wing panel plus one aileron on the left wing panel. The Aileron Length is expressed as the length per aileron segment. The Aileron Area is expressed as the total of the area of all aileron segments. Flaperons by design have the same specifications as ailerons. Flap dimensions are denoted in the same manner as ailerons. Flap Quantity is usually 2 (one on the left wing panel plus one on the right wing panel). Flap Length is the length of each flap segment and Flap Area is expressed as the total of the area of all flap segments. | |||
| 3 | Terminology: | Please See Note |
20070222 00005569 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 6 | Wing Location: | Attached to sides of Fuselage |
20070222 00005572 |
| 7 | Wing Span Tip to Tip: | 57.24 in. (1454 mm) |
20070222 00005573 |
| 8 | Wing Span (effective): | 57.24 in. (1454 mm) |
20070222 00005574 |
| 9 | Wing Chord at Root: | 17.56 in. (446 mm) |
20070222 00005575 |
| 10 | Wing Chord at outboard end of Aileron: | 8.31 in. (211 mm) |
20070222 00005576 |
| 11 | Wing Chord (effective): | 12.93 in. (329 mm) |
20070222 00005577 |
| 12 | Wing Area: | 740.34 sq in. (4776.39 sq cm) |
20070222 00005578 |
| 13 | Wing Width of Saddle: | 9.53 in. (242 mm) |
20070222 00005579 |
| 14 | Wing Length of Saddle: | 17.56 in. (446 mm) |
20070222 00005580 |
| 15 | Wing Area of Saddle only: | 167.29 sq in. (1079.32 sq cm) |
20070222 00005581 |
| 16 | Wing Area without Saddle: | 573.05 sq in. (3697.07 sq cm) |
20070222 00005582 |
| 17 | Wing Airfoil Shape: | Symmetrical |
20070222 00005583 |
| 19 | Wing Dihedral at Center: | 0 degrees |
20070222 00005585 |
| 21 | Wing Taper along Leading Edge: | Yes |
20070222 00005587 |
| 22 | Wing Taper Along Trailing Edge: | Yes |
20070222 00005588 |
| 23 | Wing Thickness Maximum: | 1.81 in. (46 mm) |
20070222 00005589 |
| 24 | Wing Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070222 00005590 |
| 25 | Wing Construction Method: | Built Up |
20070222 00005591 |
| 26 | Wing Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005592 |
| 27 | Wing Sheeted Fully: | Yes |
20070222 00005593 |
| 32 | Wing Plugs In to Fuselage: | Yes |
20070222 00005598 |
| 33 | Wing Front attaches to Fuselage with: | Bolt, Washer & Nut |
20070222 00005599 |
| 34 | Wing Back attaches to Fuselage with: | Bolt, Washer & Nut |
20070222 00005600 |
| 35 | Wing Requires Struts: | No |
20070222 00005601 |
| 36 | Wing Spar Joiner Quantity: | 2 |
20070222 00005602 |
| 37 | Wing Spar Joiner Material: | Aluminum Tube |
20070222 00005603 |
| 38 | Wing Spar Joiner Length: | 26.77 in. (680 mm) |
20070222 00005604 |
| 39 | Wing Spar Joiner Width: | .576 in. (14.63 mm) |
20070222 00005605 |
| 41 | Wing Spar Joiner (Secondary) Material: | Aluminum Tube |
20070222 00005607 |
| 42 | Wing Spar Joiner (Secondary) Length: | 20.87 in. (530 mm) |
20070222 00005608 |
| 43 | Wing Spar Joiner (Secondary) Width: | .576 in. (14.63 mm) |
20070222 00005609 |
| 48 | Wing Ailerons Factory Installed: | Yes |
20070222 00005614 |
| 49 | Wing Ailerons Quantity: | 2 |
20070222 00005615 |
| 50 | Wing Aileron Type: | Semi-Strip (2) |
20070222 00005616 |
| 51 | Wing Aileron Length per Aileron (effective): | 9.80 in. (249 mm) |
20070222 00005617 |
| 52 | Wing Aileron Chord (effective): | 2.421 in. (62 mm) |
20070222 00005618 |
| Wing Aileron Chord tapers from 71 mm at the inboard end (closest to the fuselage) to 52 mm at the outboard end. | |||
| 53 | Wing Aileron Area: | 47.47 sq in. (306 sq cm) |
20070222 00005619 |
| 54 | Wing Aileron Area relative to Wing Area: | 6.41 % |
20070222 00005620 |
| 55 | Wing Aileron Area relative to Wing Area without wing saddle: | 8.28 % |
20070222 00005621 |
| 56 | Wing Aileron Hinges per Aileron: | 3 |
20070222 00005622 |
| 57 | Wing Aileron Hinge Type: | Flexible Live Low Gap |
20070222 00005623 |
| 58 | Wing Aileron Hinge Material: | Proprietary Super Strong |
20070222 00005624 |
| 59 | Wing Aileron Hinge Adhesive: | Cyanoacrylate |
20070222 00005625 |
| 60 | Wing Aileron Hinges Pinned: | Yes |
20070222 00005626 |
| 61 | Wing Aileron Servo Required: | Yes 2 Standard |
20070222 00005627 |
| 62 | Wing Aileron Servo Location: | Bottom of Wing aligned approximately with the inboard end of the aileron. |
20070222 00005628 |
| 63 | Wing Aileron Servo Rails: | Yes in Servo Cavity |
20070222 00005629 |
| 65 | Wing Aileron Servo Wiring Tube: | Yes |
20070222 00005631 |
| 66 | Wing Ailerons Flaperon Ready with Computer Radio: | Yes |
20070222 00005632 |
| 67 | Wing Flaps Factory Installed: | Yes |
20070222 00005633 |
| 68 | Wing Flaps Mandatory: | No. Can be locked at neutral position |
20070222 00005634 |
| 69 | Wing Flaps Quantity: | 2 |
20070222 00005635 |
| 70 | Wing Flaps useable as Spoilers or Speed Brakes by deflecting upwards: | No |
20070426 00005636 |
| 71 | Wing Flap Length per Flap (effective): | 12.60 in. (320 mm) |
20070222 00005637 |
| 72 | Wing Flap Chord (effective): | 3.307 in. (84 mm) |
20070222 00005638 |
| Wing Flap Chord tapers from 73 mm at the inboard end (closest to the fuselage) to 95 mm at the outboard end. | |||
| 73 | Wing Flaps Area: | 83.33 sq in. (538 sq cm) |
20070222 00005639 |
| 74 | Wing Flap Area relative to Wing Area: | 11.26 % |
20070222 00005640 |
| 75 | Wing Flap Area relative to Wing Area without wing saddle: | 14.54 % |
20070222 00005641 |
| 76 | Wing Flap Hinges per Flap: | 3 |
20070222 00005642 |
| 77 | Wing Flap Hinge Type: | Flexible Live Low Gap |
20070222 00005643 |
| 78 | Wing Flap Hinge Material: | Proprietary Super Strong |
20070222 00005644 |
| 79 | Wing Flaps Hinge Adhesive: | Cyanoacrylate |
20070222 00005645 |
| 80 | Wing Flap Hinges Pinned: | Yes |
20070222 00005646 |
| 81 | Wing Flap Servo Required: | Yes 2 Standard |
20070222 00005647 |
| 82 | Wing Flap Servo Location: | Bottom of Wing aligned approximately with the inboard end of the flap |
20070222 00005648 |
| 83 | Wing Flap Servo Rails: | Yes in Servo Cavity |
20070222 00005649 |
| 85 | Wing Flap Servo Wiring Tube: | Yes |
20070222 00005651 |
| 87 | Wing Color Top Schema: | Blue Angels |
20070222 00005653 |
| 88 | Wing Color Top Main: | Blue |
20070222 00005654 |
| 89 | Wing Color Top Trim: | Gray leading edges and Yellow tips |
20070222 00005655 |
| 90 | Wing Color Top Lines: | Gray |
20070222 00005656 |
| 91 | Wing Color Top Rivets: | Gray 3D and Gray graphics |
20070222 00005657 |
| 92 | Wing Color Top vs Bottom: | Very Similar |
20070222 00005658 |
| 93 | Wing Color Bottom Schema: | Blue Angels |
20070222 00005659 |
| 94 | Wing Color Bottom Main: | Blue |
20070222 00005660 |
| 95 | Wing Color Bottom Trim: | Gray leading edges and Yellow tips |
20070222 00005661 |
| 96 | Wing Color Bottom Lines: | Gray |
20070222 00005662 |
| 97 | Wing Color Bottom Rivets: | Gray 3D and Black graphics |
20070222 00005663 |
| 98 | Wing Weight: | 1.49 lbs (676 g). Please See Note |
20070222 00005664 |
| The weight of the Wing is as it was when it is removed from the shipping box. This weight does NOT include the weight associated with any adhesives, spar joiners or other weight associated with end user assembly. | |||