Product Information
PRODUCT INFORMATION
 
 
VMA-F590U
VMAR F5E TIGER II 60-91 JET (PROP) ARF 3DS - CAMO
 
 
TABLE OF CONTENTS
 
CONDITIONS OF USE     1
 
SUMMARY INFORMATION     2
  GENERAL SUMMARY     3
  SPECIFICATIONS SUMMARY     18
  TECHNICAL SUMMARY     44
 
KNOWLEDGE BASE     67
  Knowledge Base - DIRECTORY (TOC)     68
  Knowledge Base - HOW TO     69
  Knowledge Base - PRIORITY RESPONSE TICKETS     72
  Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE     73
  Knowledge Base - SUPPORT SERVICES     74
 
DETAILED SPECIFICATIONS     75
  ACCESSORIES INCLUDED     76
  CLEANING     102
  COVERING     114
  COWL     141
  ENGINE     171
  ENGINE MOUNT SYSTEM     198
  ENGINE MOUNT     209
  FUEL TANK     231
  FUSELAGE     258
  LANDING GEAR     322
  RADIO SYSTEM     454
  SERVO MOUNTING     489
  SET UP     552
  STABILIZER - HORIZONTAL & ELEVATOR     590
  STABILIZER - VERTICAL & RUDDER     665
  WEIGHTS     739
  WING     757
  WING LOADING     860
 
APPENDICES     875
  PACKING LIST     876
  PACKAGING (BOX 1 OF 2) - FUSELAGE     986
  PACKAGING (BOX 2 OF 2) - WING     1026
  PRECISION     1066



1 CONDITIONS OF USE   Back to TOP 20100217
00007480
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice


2 SUMMARY INFORMATION   Back to TOP 20070321
00007481
The Summary tables below provide the most commonly requested Information, Specifications & Technical data.


3 GENERAL SUMMARY   Back to TOP 20100201
00007482
8 Part#: VMA-F590U   20100201
00007487
9 Description: VMAR F5E TIGER II 60-91 JET (PROP) ARF 3DS - CAMO   20100201
00007488
10 Highlights: MAP IN EFFECT - WITH VCOTE-2 3D DETAILING SYSTEM   20100201
00007489
11 Price List & Web Category: VMA Products AIRPLANE KITS ARF JET (PROP)   20100201
00007490
12 $USA Retail: 299.99   20100201
00007491
13 $CDN Retail: 359.99   20100201
00007492
14 Start Ship Date: 20050515   20100201
00007493


18 SPECIFICATIONS SUMMARY   Back to TOP 20070321
00007497
27 Type: Jet (Prop) .60-.91 ARF Low-Mid Wing Trike   20070321
00007506
28 Skill: For those with intermediate or better RC Flying skills   20070321
00007507
29 Cowl: No   20070321
00007508
30 Landing Gear Type: Trike   20070321
00007509
31 Engine 2 Stroke: .60 to .91 cu in. (.91 Recommended)   20070321
00007510
33 Fuselage Length with Stabilizers: 61.42 in. (1560 mm)   20070325
00007512
34 Radio for Basic Remote Control of this product: Analog or Computer 4 Channels with 6 Servos   20070324
00007513
35 Radio with Flaperons + Flaps: Computer 6 Channels with 8 Servos   20070324
00007514
36 Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min: 10.01 lbs (4549.22 g)   20070321
00007515
37 Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max: 10.61 lbs (4821.36 g)   20070321
00007516
38 Wing Airfoil Shape: Symmetrical   20070325
00007517
40 Wing Span: 55.59 in. (1412 mm)   20070325
00007519


44 TECHNICAL SUMMARY   Back to TOP 20070321
00007523
56 Engine Mounting System: Fixed firewall permanently attached to fuselage   20070427
00007535
57 Fuselage Pushrods Factory Installed: Yes   20070325
00007536
58 Fuselage Pilot Factory Installed: Yes. 3D Pilot Bust   20070325
00007537
59 Wing Ailerons Flaperon Ready with Computer Radio: Yes   20070325
00007538
60 Wing Flaps Factory Installed: Yes   20070325
00007539
61 Wing Plugs In to Fuselage: No. This is a "one piece" wing.   20070325
00007540
62 Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: 432.06 oz/sq ft (13.21 g/sq cm)   20070325
00007541
63 Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max: 456.16 oz/sq ft (13.95 g/sq cm)   20070325
00007542


67 KNOWLEDGE BASE   Back to TOP 20070321
00007546
Our Knowledge Base provides 24x7x365 access to an extensive and growing library of support & service offerings. This On-Line resource contains thousands of articles, answers to frequently asked questions (FAQ), operations manuals, additional information not found in the manuals, graphic files for download and access to our Priority Response system for Ticket Management and RMA numbers for authorised returns.


68 Knowledge Base - DIRECTORY (TOC)   Back to TOP 20070321
00007547
Knowledge Base - Directory (TOC) Listing This link goes directly to the top level of our Knowledge Base and offers a Directory Table of Contents (TOC) listing. This is a good way to enter the Knowledge Base if you don't know exactly what you are looking for and want an overview of what is available. The Table of Contents (TOC) is sorted alphabetically and you will see near the top of the list, links to Site How To, Support Services, and Subscriptions. Further down in the list you will see links to Technical Information. Before diving into the specifics, we encourage users to check out the Site How To information. Technical Information is organized into product lines or categories and usually within a particular product line or category there is a section for General information and another for detailed information on a Product by Product basis. It's a good idea to review the General Information AND the Product by Product information. Use the "Search" tool located in the top left of the Knowledge Base window to search by product name, part number or key words. The "Advanced Search" provides for powerful SQL based filtering to narrow your search results.


69 Knowledge Base - HOW TO   Back to TOP 20070321
00007548
Knowledge Base - How To and News This link goes directly to the Site How To section of our Knowledge Base and offers Help on How To work with Tickets, How To Search our Knowledge Base etc.


72 Knowledge Base - PRIORITY RESPONSE TICKETS   Back to TOP 20070321
00007550
Knowledge Base - Priority Response Tickets This link goes directly to the Knowledge Base Priority Response login screen. Login is required to use the Priority Response Ticket System. New Users who are trying to login for the First Time will need to Register First. Registration takes a minute or less. Users may find the following link helpful Knowledge Base - Priority Response Tickets - Help and How To


73 Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE   Back to TOP 20070321
00007551
Knowledge Base - Priority Response Notification Service This link goes directly to the Priority Response Notification Service section of our Knowledge Base where we offer information about how to subscribe to automatic Notifications of changes or additions to articles related to a particular product. Priority Response registered members can receive automatic updates to information related to the products they are interested in. Subscribers can elect to monitor information about one product or one subject or dozens of any mix of either.


74 Knowledge Base - SUPPORT SERVICES   Back to TOP 20070321
00007552
Knowledge Base - Support Services This link goes directly to the Support Services section of our Knowledge Base where we offer information related to Contacts, Claims for Missing or Shipping Damaged Components, Warranty Claims, Return Procedures, Subscription Services for Automatic Notification and Shipping Information.


75 DETAILED SPECIFICATIONS   Back to TOP 20070321
00007553
The Detailed Specification tables below provide highly detailed technical information about this product and components that make up this product. Set Up values and calculated Performance Data are also provided where applicable.


76 ACCESSORIES INCLUDED   Back to TOP 20070325
00007554
89 Accessories Drop Tank: Yes. Please See Note.   20070325
00007567
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
95 Accessories Missile Set: Yes. Please See Note   20070325
00007573
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
97 Accessories Spinner: Yes. Please See Note   20070325
00007575
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component


102 CLEANING   Back to TOP 20070321
00007580
107 Cleaning Caution: Do NOT NOT NOT clean with Simple Green, 409, 2-butoxymethanol, Butyl Cellulose, Glycol Ethers or Solvents. Test all plastics first. Test small area of covering first. Avoid dousing or flooding. Lightly spray only. Please See Notes.   20070321
00007585
Before cleaning this product either before or after use, thoroughly review any Read Me First documents that may have been included with this product AND the information at the following link: VMAR - Cleaning Model Aircraft
108 Recommended Cleaner: Fantastic diluted up to 50/50 with water   20070321
00007586
109 Cleaning Method: Do NOT NOT NOT spray any cleaner directly onto plastic parts or canopy without first testing thoroughly. Mist cleaner onto model, then wipe gently with paper towel.   20070321
00007587
110 Polishing Method: Spray Armorall onto paper towel then wipe onto surface of model. Use another paper towel or soft cloth to buff to high gloss.   20070321
00007588


114 COVERING   Back to TOP 20070321
00007592
119 Covering Caution: Please See Note   20070321
00007597
Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information
120 Covering Factory Applied: Yes   20070321
00007598
121 Covering Type: VCOTE2-3DS (3D Detailing System)   20070321
00007599
122 Covering Material: Heat Shrink Film with Heat Activated Adhesive   20070321
00007600
123 Covering Heat Shrinkable: Yes, with Medium to High Temperature   20070321
00007601
124 Covering Seams: Minimal. Sealed with Sure Seal System   20070321
00007602
125 Covering Repairable: Yes with Heat Iron and Heat Gun   20070321
00007603
126 Covering Repair & Maintenance Method: Please See Note   20070321
00007604
Please do NOT assume that this covering has the same characteristics as older or other covering systems. It may but it may not and diving into a repair without preparing can be an expensive one way trip into trouble. Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information
127 Covering Patch Sheets Available: Yes, as an aftermarket item. Please See Note   20070321
00007605
For covering patch sheets, please consult the spare parts listing for this product.
128 Covering Sets Available: Yes, as an aftermarket item. Please See Note   20070321
00007606
For covering sets consisting of original factory covering sheets, please consult the spare parts listing for this product. Covering sets are intended for aftermarket application following large scale repairs to major components such as wings, fuselages and stabilizers.
129 Covering Fuelproof Caution: If above 15% Nitro Test All Plastics First   20070321
00007607
130 Covering Graphics Factory Applied: Yes   20070321
00007608
131 Covering Graphics Inside the Covering: Yes. Between the Base Layer and the Clear Top Layer   20070321
00007609
132 Covering Fuelproof to Glow Fuel: Yes for common model engine glow fuel to at least 25% nitromethane.   20070321
00007610
133 Covering Decals: No. All graphics factory applied   20070321
00007611
134 Covering Fuelproof to other Model Fuel: No known issues. Please See Note.   20070321
00007612
Caution: Avoid applying raw fuel of any type onto the model. Test all plastics first. Test small out of sight area of covering first.
135 Covering Layers: No.   20070321
00007613
136 Covering Strips: No.   20070321
00007614
137 Covering Stripes: No.   20070321
00007615


141 COWL   Back to TOP 20070321
00007619
142 Cowl On this model: No   20070321
00007620


171 ENGINE   Back to TOP 20070321
00007622
176 Engine Location: Front end of Fuselage   20070321
00007627
177 Engine Location of Propeller: Forward of Engine (Tractor)   20070321
00007628
178 Engine Orientation: 90 degrees (Head Facing Right)   20070321
00007629
179 Engine Quantity: 1   20070321
00007630
180 Engine 2 Stroke Minimum Size: .60 cu in. (9.83 cu cm)   20070321
00007631
181 Engine 2 Stroke Maximum Size: .91 cu in. (14.91 cu cm)   20070321
00007632
182 Engine 2 Stroke Recommended Size: .91 cu in. 14.91 cu cm)   20070321
00007633
186 Engine 4 Stroke Recommendation: This model has been designed to accomodate 2 stroke engines. No provision has been made for the use of 4 stroke engines in this model.   20070321
00007637
187 Engine Horizontal Thrust Adjustable: Yes by inserting washers   20070321
00007638
188 Engine Horizontal Thrust Recommended: 0 degrees   20070321
00007639
189 Engine Horizontal Thrust Maximum Angle: 3 degrees Right   20070321
00007640
190 Engine Vertical Thrust Adjustable: Yes by adjusting position of engine on engine mount beams   20070321
00007641
191 Engine Vertical Thrust Recommended: 0 degrees   20070321
00007642
192 Engine Vertical Thrust Maximum Angle: 2 degrees Down   20070321
00007643
193 Engine Replace with Electric Motor: Please See Note   20070321
00007644
If your model is equipped with a Power Module (see section re Engine Mount System) then conversion to Electric Motor power is likely possible. For more information please click on the following link: More Information about Electric Power Conversions & Requirements
194 Engine Replace with Jet (Turbine): Not Recommended. Please See Note   20070321
00007645
This model has been designed to use a 2 stroke engine mounted in the nose and turning a propeller in a standard "tractor" power configuration. For information about converting this model to use Jet (Turbine) power please click on the following link: More Information about Jet (Turbine) Conversions & Requirements


198 ENGINE MOUNT SYSTEM   Back to TOP 20070321
00007649
204 Engine Mounting System: Fixed firewall permanently attached to fuselage   20070427
00003534
205 Engine Mount Firewall Drilled for Engine Mount: Yes   20070427
00003536


209 ENGINE MOUNT   Back to TOP 20070321
00007651
210 Engine Mount Quantity: 1 Set for 1 Engine   20070321
00007652
211 Engine Mount Installed: Yes   20070321
00007653
212 Engine Mount Engine Width Max: 1.57 in. (40 mm)   20070321
00007654
215 Part#: RRC-MOUNTUPP   20110223
00005270
220 Engine Mount Type: T-Bar Beams (2) without clamp plates or fasteners   20070131
00005294
221 Engine Mount Material: Composite T-Bar Beams   20070131
00005293
222 Engine Mount Attaches to Firewall with: 2 Machine Bolts per T-Bar Beam   20070131
00005277
223 Engine Mount Retains Engine with: End user supplied Fasteners   20070131
00005278
224 Engine Mount Drilling Required: Yes   20070131
00005279
225 Engine Mount Drilling Optional: No. Must Drill   20070131
00005280
226 Engine Mount Mounting Bolt Type: Black Allen Head Machine Bolts with Washers and Fiber Insert Lock Nuts recommended   20070131
00005281


231 FUEL TANK   Back to TOP 20070321
00007656
232 Fuel Tank Included: Yes   20070321
00007657
233 Fuel Tank Installation: Mounts aft of firewall in fuel tank compartment   20070321
00007658
234 Fuel Tank is Accessible by: Removing Canopy (screws) and Cockpit Tub (screws)   20070321
00007659
237 Part#: VMA-TANK3503   20100328
00003866
242 Fuel Tank Material: Plastic   20061231
00001768
243 Fuel Tank Metal Tubes Included: 3 (Straight)   20070203
00001769
244 Fuel Tank Flexible Tubing Included: No. Select for fuel type.   20061228
00001770
245 Fuel Tank Safety Stopper System: Yes. Metal overcap retains stopper and prevents tank neck from splitting.   20061221
00001881
246 Fuel Tank Stopper Compatibility: Glow Fuel Only   20061221
00001771
247 Fuel Tank Clunk: Yes   20061221
00001772
248 Fuel Tank Length (external not including neck): 5.16 in. (131 mm)   20110330
00001884
249 Fuel Tank Width A (external): 2.40 in. (61 mm)   20061221
00001885
250 Fuel Tank Width B (external): 2.05 in. (52 mm)   20061221
00001886
251 Fuel Tank Capacity: 11.645 oz. (330 ml)   20070106
00001773
252 Fuel Tank Installation Gasket: Yes   20061221
00001882
253 Fuel Tank Weight (empty): .132 lbs (60 g). Please See Note   20070207
00001888
The Fuel Tank Weight (empty) includes the tank, clunk, stopper, metal tubes and gasket. It does NOT include any flexible fuel tubing inside the tank.
254 Fuel Tank Weight (full): .862 lbs (392 g). Please See Note   20070207
00001889
The Fuel Tank Weight (full) includes the tank, clunk, stopper, metal tubes, gasket, flexible fuel tubing inside the tank and a full load of glow fuel. The weight does not include the weight of any external fuel tubing.


258 FUSELAGE   Back to TOP 20070321
00007661
260 Part#: VMA-F590UF   20110223
00007157
261 Dimensions: Please See Note   20070321
00007158
Fuselage Length is with Stabilizers and without Spinner unless otherwise noted.
262 Terminology: Please See Note   20070321
00007159
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped.
265 Fuselage Location: Above Wing   20070321
00007162
266 Fuselage Length with Stabilizers: 61.42 in. (1560 mm)   20070321
00007163
267 Fuselage Length with Stabilizers and Spinner: 65.79 in. (1671 mm)   20070321
00007164
268 Fuselage Length without Stabilizers or Spinner: 61.42 in. (1560 mm)   20070321
00007165
269 Fuselage External Horizontal Width Maximum: 9.17 in. (233 mm)   20070321
00007166
270 Fuselage External Horizontal Width at Firewall: 4.21 in. (107 mm)   20070321
00007167
271 Fuselage External Vertical Thickness Maximum: 8.98 in. (228 mm)   20070321
00007168
272 Fuselage External Vertical Thickness at Firewall: 4.13 in. (105 mm)   20070321
00007169
273 Fuselage Internal Width of Radio Bay (effective): 5.85 in. (149 mm)   20070325
00007170
Radio Bay internal width tapers from 162 mm at the forward former to 135 mm at the aft former.
274 Fuselage Internal Height of Radio Bay (effective): 3.80 in. (97 mm)   20070321
00007171
Radio Bay internal height varies from 100 mm at the forward former to 93 mm at the aft former. The turtle deck cavity is not included in these measurements.
275 Fuselage Internal Length of Radio Bay (effective): 7.99 in. (203 mm)   20070321
00007172
276 Fuselage Internal Volume of Radio Bay: 177.52 cu in. (2909 cu cm)   20070325
00007173
277 Fuselage Material: Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.   20070321
00007174
278 Fuselage Construction Method: Built Up   20070321
00007175
279 Fuselage Wing Saddle Tape: No.   20070321
00007176
280 Fuselage Sheeted Fully: Yes   20070321
00007177
281 Fuselage Construction Adhesive: PVA, Cyanoacrylate and Epoxy   20070321
00007178
282 Fuselage Shape of Main Section: Complex semi-scale cross section   20070321
00007179
283 Fuselage Shape of Turtle Deck: Elliptical sloping aft to nearly flat at tail   20070321
00007180
284 Fuselage Hatches: Yes 1 on bottom. Rear hatch near tail for access to radio bay   20070321
00007181
285 Fuselage Pushrods Factory Installed: Yes   20070325
00007182
286 Fuselage Pushrods Rudder: 1   20070321
00007183
288 Fuselage Pushrods Throttle: 1   20070321
00007185
289 Fuselage Pushrod Material: Inner & outer plastic tubes with metal end rods   20070321
00007186
290 Fuselage Pushrods Threaded: Yes on one end   20070321
00007187
291 Fuselage Pushrods In Guide Tubes: Yes   20070321
00007188
293 Fuselage Canopy Factory Installed: Yes. After factory fitting the canopy is removed for shipping   20070321
00007190
294 Fuselage Canopy attached to Fuselage with: Screws. Canopy can be removed and then reattached. Please See Note   20070321
00007191
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
295 Fuselage Pilot Factory Installed: Yes. 3D Pilot Bust   20070321
00007192
296 Fuselage Cockpit Instrument Panel: Yes   20070321
00007193
298 Fuselage Cockpit "Tub": Yes   20070321
00007195
299 Fuselage Cockpit "Tub" attached to Fuselage with: Screws. Cockpit Tub can be removed and then reattached   20070321
00007196
300 Fuselage Color Top Schema: Camoflage   20070321
00007197
301 Fuselage Color Top Main: Khaki and Olive Drab   20070321
00007198
302 Fuselage Color Top Trim: Thin Black ring around nose. Gray at Tail   20070321
00007199
303 Fuselage Color Top Lines: Gray   20070321
00007200
304 Fuselage Color Top Rivets: 3D Khaki and Olive Drab and Gray graphics   20070321
00007201
305 Fuselage Color Top vs Bottom: Different   20070321
00007202
306 Fuselage Color Bottom Schema: None. Mainly all one color   20070321
00007203
307 Fuselage Color Bottom Main: Khaki   20070321
00007204
308 Fuselage Color Bottom Trim: Gray Tail   20070321
00007205
309 Fuselage Color Bottom Lines: Gray   20070321
00007206
310 Fuselage Color Bottom Rivets: 3D Khaki and Gray graphics   20070321
00007207
311 Fuselage Color Left Side Schema: Camoflage   20070321
00007208
312 Fuselage Color Right Side Schema: Camoflage   20070321
00007209
313 Fuselage Color Left vs Right: Similar   20070321
00007210
314 Fuselage Color Side Main: Khaki & Olive Drab   20070321
00007211
315 Fuselage Color Side Trim: "Stars & Bars". 59 US AIRFORCE near nose. Black & Red text & elements. Gray tail   20070321
00007212
316 Fuselage Color Side Lines: Gray   20070321
00007213
317 Fuselage Color Side Rivets: 3D Khaki & Olive Drab and Gray graphics   20070321
00007214
318 Fuselage Weight: 2.37 lbs (1079 g). Please See Note   20070321
00007215
The weight of the Fuselage is as it was when it is removed from the shipping box. This weight does NOT include weight related to any power systems, radio gear, control surfaces or other weight associated with end user assembly.


322 LANDING GEAR   Back to TOP 20070321
00007663
327 Landing Gear Type: Trike   20070321
00007668
328 Nose Gear Included: Yes   20070321
00007669
329 Nose Gear Mounted to: Firewall (Nose Gear Block)   20070324
00007670
330 Nose Gear Axle points to the: Left   20070324
00007671
331 Nose Gear Vertical Distance of Axle from Fuselage: 6.0 in. (152 mm)   20070324
00007672
332 Nose Gear Wheel Quantity: 1   20070324
00007673
333 Nose Gear Wheel Tire Material: Rubber   20070324
00007674
334 Nose Gear Wheel Hub Material: Metal   20070324
00007675
335 Nose Gear Wheel Diameter: 2.362 in. (60 mm)   20070324
00007676
336 Nose Gear Wheel Treaded: Yes Regular   20070324
00007677
337 Nose Gear Wheel Pant: No   20070321
00007678
338 Nose Gear Retract Ready: Yes   20070331
00007679
340 Nose Gear Steerable: Yes   20070321
00007681
341 Nose Gear Steers from: Left Side   20070321
00007682
342 Please Note: The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below.   20070321
00007683
344 Part#: VMA-F590XNGB   20070325
00008088
349 Nose Gear Material: Wire   20070321
00008093
350 Nose Gear Shock Coil: Yes   20070321
00008094
353 Nose Gear Wire Length from Axle to Coil: 5.20 in. (132 mm)   20070321
00008097
354 Nose Gear Wire Length above Coil: 2.05 in. (52 mm)   20070321
00008098
355 Nose Gear Material: Wire   20070321
00008099
356 Nose Gear Shock Absorbing: Yes. Shock Absorption via coil in wire   20070321
00008100
361 Nose Gear Wire Diameter: .197 in. (5.000 mm)   20070321
00008105
362 Nose Gear Shaped by Factory: Yes   20070321
00008106
363 Nose Gear Axle Provided: Yes   20070321
00008107
364 Nose Gear Collars Provided: Yes 1   20070321
00008108
365 Nose Gear Weight (without wheel): .15 lbs (70 g). Please See Note   20070321
00008109
The weight of the nose gear does not include the weight of wheel.
369 Main Gear Included: Yes. 1 Right and 1 Left   20070321
00007685
370 Main Gear Stance between center of wheels: 23.98 in. (609 mm)   20070324
00007686
371 Main Gear Mounted to: Wing   20070324
00007687
372 Main Gear Axles point: Outboard   20070324
00007688
373 Main Gear Vertical Distance of Axle from Wing: 4.61 in. (117 mm)   20070324
00007689
374 Main Gear Wheel Quantity per Gear: 1   20070324
00007690
375 Main Gear Wheel Tire Material: Rubber   20070324
00007691
376 Main Gear Wheel Hub Material: Metal   20070324
00007692
377 Main Gear Wheel Diameter: 3.15 in. (80 mm)   20070321
00007693
378 Main Gear Wheels Treaded: Yes Regular   20070321
00007694
379 Main Gear Wheel Pants: No   20070321
00007695
380 Main Gear Retract Ready: Yes   20070331
00007696
382 Please Note: The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below.   20070321
00007698
384 Part#: VMA-F590XMGB   20071031
00008040
389 Main Gear Material: Wire   20070321
00008045
390 Main Gear Shock Coil: Yes   20070321
00008046
391 Main Gear Struts (Simulated) Provided: Yes   20070321
00008047
392 Main Gear Struts (Simulated) Pre-Assembled: Yes   20070321
00008048
393 Main Gear Wire Length (effective) from Axle to Torque Segment: 5.51 in. (140 mm)   20070321
00008049
394 Main Gear Wire Length of Torque Segment parallel to Wing: 1.50 in. (38 mm)   20070321
00008050
395 Main Gear Wire Length of Torque Segment inside and perpendicular to Wing: .83 in. (21 mm)   20070321
00008051
404 Main Gear Wire Diameter: .197 in. (5.000 mm)   20070321
00008060
405 Main Gear Shaped by Factory: Yes   20070321
00008061
406 Main Gear Axles Provided: Yes 2 as part of main gear   20070321
00008062
407 Main Gear Collars Provided: Yes. 1 per axle   20070321
00008063
408 Main Gear Weight (without wheels): .39 lbs (176 g). Please See Note   20070321
00008064
The weight of the main gear does not include the weight of wheels.


454 RADIO SYSTEM   Back to TOP 20070321
00007713
459 Radio Complete System Factory Installed: No. Radio System NOT Included   20070321
00007718
460 Radio Receiver Installed: No. Receiver NOT Included   20070321
00007719
461 Radio Servos Installed: No. Servos NOT Included   20070321
00007720
462 Radio for Basic Remote Control of this product: Analog or Computer 4 Channels with 6 Servos   20070324
00007721
463 Radio for Basic Remote Control - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons   20070324
00007722
464 Radio for Basic Remote Control - Additional Wiring: 3 Aileron 24 in Extensions, 1 Y-Harness for Ailerons, 1 Y for Rudder, 1 Y for Elevator   20070324
00007723
465 Radio with Retracts Function: Analog or Computer 4+1=5 Channels with 5+3=8 Servos   20070324
00007724
466 Radio with Retracts Function - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, and 2 for Retracts   20070324
00007725
467 Radio with Retracts Function - Additional Wiring: 3 Aileron 24 in. Extensions, 1 Y-Harness for Ailerons, 1 Y-Harness for Elevator, 2 Retract 24 in. Extensions and 1 Y-Harness for Retracts   20070324
00007726
468 Radio with Flaperon Function: Computer 5 Channels with 6 Servos   20070324
00007727
469 Radio with Flaperon Function - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons   20070324
00007728
470 Radio with Flaperon Function - Additional Wiring: 4 Aileron 24 in. Extensions, 1 Y-Harness for Elevator   20070324
00007729
471 Radio with Flaperons + Retracts: Computer 5+1= 6 Channels with 6+2= 8 Servos   20070324
00007730
473 Radio with Flaperons + Retracts - Additional Wiring: 4 Aileron 24 in. Extensions, 1 Y-Harness for Elevator, 2 Retract 24 in. Extensions and 1 Y-Harness for Retracts   20070324
00007732
474 Radio with Flap Function: Analog or Computer 6 Channels with 8 Servos   20070324
00007733
475 Radio with Flap Function - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, 2 for Flaps   20070324
00007734
476 Radio with Flap Function - Additional Wiring: 3 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y-Harness for Ailerons, 1 Y for Flaps, 1 Y for Elevator   20070324
00007735
477 Radio with Flaps + Retracts: Analog or Computer 5+1=6 Channels with 6+4=10 Servos   20070324
00007736
478 Radio with Flaps + Retracts - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, 2 for Flaps, 2 for Retracts   20070324
00007737
479 Radio with Flaps + Retracts - Additional Wiring: For Ailerons 3x24" & 1 Y-Harness, For Elevators 1 Y-Harness, For Flaps 3x24" & 1 Y-Harness, For Retracts 2x24" & 1 Y-Harness   20070324
00007738
480 Radio with Flaperons + Flaps: Computer 6 Channels with 8 Servos   20070324
00007739
481 Radio with Flaperons + Flaps - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons, 2 for Flaps   20070324
00007740
482 Radio with Flaperons + Flaps - Additional Wiring: 4 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y for Flaps, 1 Y for Elevator   20070324
00007741
483 Radio with Flaperons + Flaps + Retracts: Computer 6+1=7 Channels with 7+3=10 Servos   20070324
00007742
484 Radio with Flaperons + Flaps + Retracts - Servo Usage: 1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons, 2 for Flaps, 2 for Retracts   20070324
00007743
485 Radio with Flaperons + Flaps + Retracts - Additional Wiring: For Ailerons 4x24", For Elevators 1 Y-Harness, For Flaps 3x24" & 1 Y-Harness, For Retracts 2x24" & 1 Y-Harness   20070324
00007744


489 SERVO MOUNTING   Back to TOP 20070321
00007748
494 Primary Location for Servos: In Servo Bay near aft end of Fuselage (accessible via removal of Horiz Stab on bottom of Fuselage)   20070324
00007753
495 Servo Mounting Method at Primary Location: Tray   20070321
00007754
496 Primary Servo Tray Included: Yes   20070321
00007755
497 Primary Servo Tray Universal: Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech   20070321
00007756
498 Primary Servo Tray Adjustable: No   20070321
00007757
499 Primary Servo Tray Material: Wood   20070321
00007758
500 Primary Servo Tray Number of Servos: 5   20070321
00007759
501 Primary Servo Tray hold Servos for: Rudder and Throttle   20070324
00007760
502 Primary Servo Tray provide for Switch Mount: No   20070324
00007761
503 Secondary Location for Servos: In Wings   20070321
00007762
504 Servo Mounting Method at Secondary Location: Rails   20070321
00007763
505 Secondary Servo Rails Included: Yes   20070321
00007764
506 Secondary Servo Rails Universal: Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech   20070321
00007765
507 Secondary Servo Rails Adjustable: No   20070321
00007766
508 Secondary Servo Rails Material: Wood   20070321
00007767
509 Secondary Servo Rails Number of Servos: 2   20070321
00007768
510 Secondary Servo Rails hold Servos for: Ailerons   20070321
00007769
511 Secondary Servo Rails provide for Switch Mount: No   20070321
00007770
512 Tertiary Location for Servos: In Wings   20070321
00007771
513 Servo Mounting Method at Tertiary Location: Rails   20070321
00007772
514 Tertiary Servo Rails Included: Yes   20070321
00007773
515 Tertiary Servo Rails Universal: Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech   20070321
00007774
516 Tertiary Servo Rails Adjustable: No   20070321
00007775
517 Tertiary Servo Rails Material: Wood   20070321
00007776
518 Tertiary Servo Rails Number of Servos: 2   20070321
00007777
519 Tertiary Servo Rails hold Servos for: Flaps   20070321
00007778
520 Tertiary Servo Rails provide for Switch Mount: No   20070321
00007779
521 Other (A) Location for Servos: In Wings (Optional)   20070324
00007780
522 Servo Mounting Method at Other (A) Location: Rails   20070324
00007781
523 Other (A) Servo Rails Included: Yes   20070324
00007782
524 Other (A) Servo Rails Universal: Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech   20070324
00007783
525 Other (A) Servo Rails Adjustable: No   20070324
00007784
526 Other (A) Servo Rails Material: Wood   20070324
00007785
527 Other (A) Servo Rails Number of Servos: 1   20070324
00007786
528 Other (A) Servo Rails hold Servos for: Main Retracts (Optional)   20070324
00007787
529 Other (A) Servo Rails provide for Switch Mount: No   20070324
00007788
530 Other (B) Location for Servos: In Fuselage (Optional)   20070324
00007789
531 Servo Mounting Method at Other (B) Location: Tray   20070324
00007790
532 Other (B) Servo Tray Included: Yes   20070324
00007791
533 Other (B) Servo Tray Universal: Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech   20070324
00007792
534 Other (B) Servo Tray Adjustable: No   20070324
00007793
535 Other (B) Servo Tray Material: Wood   20070324
00007794
536 Other (B) Servo Tray Number of Servos: 1   20070324
00007795
537 Other (B) Servo Tray hold Servos for: Nose Retract Gear (Optional)   20070324
00007796
538 Other (B) Servo Tray provide for Switch Mount: No   20070324
00007797


552 SET UP   Back to TOP 20070321
00007811
557 CG Measured with Respect To: Distance Back from Forward fit of Wing Fairing (near plastic inlet) adjacent to side of Fuselage with No Fuel. (See Diagram in Assembly & Operations Manual)   20070324
00007816
558 CG Location for First Flight: 8.86 in. (225 mm)   20070324
00007817
559 CG Location Nominal: 5.71 in. (145 mm)   20070324
00007818
560 CG Location Max: 9.06 in. (230 mm)   20070324
00007819
562 Thrust Line Horizontal: Coincident with midway point between the two factory installed T-bar engine mounts (mounts are rotated 90 degrees).   20070321
00007821
563 Thrust Line Vertical: Up & Down through Center of Firewall   20070321
00007822
564 Rudder Movement Min & First Flight Left: .630 in. (16 mm)   20070321
00007823
565 Rudder Movement Min & First Flight Right: .630 in. (16 mm)   20070321
00007824
566 Rudder Movement Min & First Flight Total Left & Right: 1.260 in. (32 mm)   20070321
00007825
567 Rudder Movement Maximum Left: .984 in. (25 mm)   20070321
00007826
568 Rudder Movement Maximum Right: .984 in. (25 mm)   20070321
00007827
569 Rudder Movement Maximum Total Left & Right: 1.969 in. (50 mm)   20070321
00007828
570 Elevator Movement Min & First Flight Up: .315 in. (8 mm)   20070321
00007829
571 Elevator Movement Min & First Flight Down: .315 in. (8 mm)   20070321
00007830
572 Elevator Movement Min & First Flight Total Up & Down: .630 in. (16 mm)   20070321
00007831
573 Elevator Movement Maximum Up: .394 in. (10 mm)   20070324
00007832
574 Elevator Movement Maximum Down: .394 in. (10 mm)   20070324
00007833
575 Elevator Movement Maximum Total Up & Down: .787 in. (20 mm)   20070324
00007834
576 Aileron Movement Min & First Flight Right Up & Left Down: .197 in. (5 mm)   20070324
00007835
577 Aileron Movement Min & First Flight Left Up & Right Down: .197 in. (5 mm)   20070324
00007836
578 Aileron Movement Min & First Flight Total Up and Down: .394 in. (10 mm)   20070324
00007837
579 Aileron Movement Maximum Right Up & Left Down: .394 in. (10 mm)   20070324
00007838
580 Aileron Movement Maximum Left Up & Right Down: .394 in. (10 mm)   20070324
00007839
581 Aileron Movement Maximum Total Up & Down: .787 in. (20 mm)   20070324
00007840
582 Flaperon Movement Min & First Flight Down: None. Minimize to Neutral   20070324
00007841
583 Flaperon Movement Maximum Down: .20 in. (5.00 mm)   20070324
00007842
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
584 Flap Movement Min & First Flight Down: None. Minimize to Neutral   20070324
00007843
585 Flap Movement Maximum Down: .787 in. (20.00 mm)   20070324
00007844
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
586 Speed Brake Movement Maximum (Flap) Up: .787 in. (20.00 mm)   20070325
00008218
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component


590 STABILIZER - HORIZONTAL & ELEVATOR   Back to TOP 20070321
00007848
The ("Horiz") Horizontal Stabilizer ("Stab") consists of the horizontal tailplane that is attached to the fuselage and the elevator which is the moveable control surface attached to the trailing edge of the tailplane.
592 Part#: VMA-F590UTH   20071031
00007234
595 Dimensions: Please See Note   20070321
00007237
The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments.
596 Terminology: Please See Note   20070321
00007238
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
599 Horiz Stabilizer Location: Horizontal Stabilizer saddle in bottom at aft end of Fuselage   20070321
00007241
600 Horiz Stabilizer Span Tip to Tip: 27.56 in. (700 mm)   20070321
00007242
601 Horiz Stabilizer Span (effective): 27.56 in. (700 mm)   20070321
00007243
602 Horiz Stabilizer Chord Maximum: 7.91 in. (201 mm)   20070321
00007244
603 Horiz Stabilizer Chord at outboard end of Elevator: 3.46 in. (88 mm)   20070321
00007245
604 Horiz Stabilizer Chord (effective): 5.69 in. (145 mm)   20070321
00007246
Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Saddle Width is 142 mm at the aft end of the saddle.
605 Horiz Stabilizer Area: 156.78 sq in. (1011.50 sq cm)   20070321
00007247
606 Horiz Stabilizer Area relative to Wing Area: 23.45 %   20070506
00007248
607 Horiz Stabilizer Width of Saddle: 6.24 in. (159 mm)   20070321
00007249
The Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Width is 142 mm at the aft end of the saddle.
608 Horiz Stabilizer Length of Saddle: 7.95 in. (202 mm)   20070321
00007250
609 Horiz Stabilizer Area of Saddle: 49.63 sq in. (320 sq cm)   20070321
00007251
610 Horiz Stabilizer Area without Saddle: 107.16 sq in. (691.33 sq cm)   20070321
00007252
611 Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: 20.40 %   20070325
00007253
612 Horiz Stabilizer Airfoil Shape: Slab   20070321
00007254
613 Horiz Stabilizer Thickness Maximum: .394 in. (10.0 mm)   20070321
00007255
617 Horiz Stabilizer Taper along Leading Edge: Yes   20070321
00007259
618 Horiz Stabilizer Taper along Trailing Edge: Yes   20070321
00007260
619 Horiz Stabilizer Material: Balsa   20070321
00007261
620 Horiz Stabilizer Construction Method: Solid   20070321
00007262
621 Horiz Stabilizer Construction Adhesive: PVA, Cyanoacrylate and Epoxy   20070321
00007263
627 Horiz Stabilizer Attaches to Fuselage via: Metal Bolts (x3)   20070321
00007269
629 Horiz Stabilizer Requires Struts: No   20070321
00007271
630 Horiz Stabilizer Elevator Factory Installed: Yes   20070321
00007272
631 Horiz Stabilizer Elevator Quantity: 2 (i.e. split into left & right halves)   20070321
00007273
632 Horiz Stabilizer Elevator Length (effective): 10.08 in. (256 mm)   20070321
00007274
Horiz Stabilizer Elevator Length is 256 mm at the hinge line (closest to the wing). The Elevator Length is 256 mm at the trailing edge.
633 Horiz Stabilizer Elevator Chord (effective): 1.95 in. (50 mm)   20070321
00007275
Horiz Stabilizer Elevator Chord is 43 mm at the inboard end (closest to the fuselage). The Elevator Chord is 56 mm at the outboard end.
634 Horiz Stabilizer Elevator Area: 39.28 sq in. (253 sq cm)   20070321
00007276
635 Horiz Stabilizer Elevator Area relative to Wing Area: 5.88 %   20070506
00007277
636 Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: 7.48 %   20070325
00007278
637 Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: 25.06 %   20070321
00007279
638 Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: 36.66 %   20070321
00007280
639 Horiz Stabilizer Elevator Hinges per Elevator: 3   20070321
00007281
640 Horiz Stabilizer Elevator Hinge Type: Flexible Live Low Gap   20070321
00007282
641 Horiz Stabilizer Elevator Hinge Material: Proprietary Super Strong   20070321
00007283
642 Horiz Stabilizer Elevator Hinge Adhesive: Cyanoacrylate   20070321
00007284
643 Horiz Stabilizer Elevator Hinges Pinned: Yes, Inboard & Outboard   20070321
00007285
644 Horiz Stabilizer Elevator Servo Required: Yes 2 Standard   20070321
00007286
645 Horiz Stabilizer Elevator Servo Location: In servo mounts attached to the upper surface of the horizontal stabilizer within the saddle area   20070321
00007287
646 Horiz Stabilizer Elevator Servo Mounting Method: Tray (Wood)   20070321
00007288
650 Horiz Stabilizer Color Top Schema: Camoflage   20070321
00007292
651 Horiz Stabilizer Color Top Main: Khaki & Olive Drab   20070321
00007293
652 Horiz Stabilizer Color Top Trim: Black. Very small elements.   20070321
00007294
653 Horiz Stabilizer Color Top Lines: Gray   20070321
00007295
654 Horiz Stabilizer Color Top Rivets: 3D Khaki & Olive Drab   20070321
00007296
655 Horiz Stabilizer Color Top vs Bottom: Different   20070321
00007297
656 Horiz Stabilizer Color Bottom Schema: One color   20070321
00007298
657 Horiz Stabilizer Color Bottom Main: Khaki   20070321
00007299
658 Horiz Stabilizer Color Bottom Trim: None   20070321
00007300
659 Horiz Stabilizer Color Bottom Lines: Black   20070321
00007301
660 Horiz Stabilizer Color Bottom Rivets: 3D Khaki   20070321
00007302
661 Horiz Stabilizer Weight: .348 lbs (158 g)   20070321
00007303


665 STABILIZER - VERTICAL & RUDDER   Back to TOP 20070325
00007850
The ("Vert") Vertical Stabilizer ("Stab") consists of the vertical tailplane that is attached to the fuselage and the rudder which is the moveable control surface attached to the trailing edge of the vertical tailplane. In the vast majority of cases there is one Vertical Stabilizer per aircraft, in some relatively rare cases there are two.
667 Part#: VMA-F590UTV   20071031
00007307
672 Source Data - Horiz Stabilizer Elevator Area: 39.28 sq in. (253 sq cm)   20070325
00007312
673 Dimensions: Please See Note   20070321
00007313
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments.
674 Terminology: Please See Note   20070321
00007314
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
677 Vertical Stabilizer Location: Vertical Slot in top of aft end of Fuselage   20070321
00007317
678 Vertical Stabilizer Quantity: 1   20070321
00007318
679 Vertical Stabilizer Height Fuse to End Of Tip: 11.61 in. (295 mm)   20070321
00007319
680 Vertical Stabilizer Height (effective): 7.17 in. (182 mm)   20070321
00007320
681 Vertical Stabilizer Chord Maximum: 18.11 in. (460 mm)   20070321
00007321
682 Vertical Stabilizer Chord at tip: 3.82 in. (97 mm)   20070321
00007322
683 Vertical Stabilizer Chord (effective): 8.46 in. (215 mm)   20070321
00007323
684 Vertical Stabilizer Area: 60.65 sq in. (391.30 sq cm)   20070321
00007324
685 Vertical Stabilizer Area relative to Wing Area: 106.43 %   20070325
00007325
686 Vertical Stabilizer Area relative to Wing Area without wing saddle: 11.55 %   20070325
00007326
687 Vertical Stabilizer Airfoil Shape: Slab   20070321
00007327
688 Vertical Stabilizer Thickness Maximum: .390 in. (9.9 mm)   20070321
00007328
689 Vertical Stabilizer Taper along Leading Edge: Yes   20070321
00007329
690 Vertical Stabilizer Taper along Trailing Edge: Yes   20070321
00007330
691 Vertical Stabilizer Material: Balsa   20070321
00007331
692 Vertical Stabilizer Construction Method: Solid   20070321
00007332
693 Vertical Stabilizer Construction Adhesive: PVA, Cyanoacrylate and Epoxy   20070321
00007333
698 Vertical Stabilizer Attaches to Fuselage via: Slot in Fuselage and Adhesive   20070321
00007338
699 Vertical Stabilizer Adhesive Required: 30 Minute Epoxy   20070321
00007339
700 Vertical Stabilizer Requires Struts: No   20070321
00007340
701 Vertical Stabilizer Rudder Factory Installed: Yes   20070321
00007341
702 Vertical Stabilizer Rudder Quantity: 1 (i.e. dual rudders)   20070321
00007342
703 Vertical Stabilizer Rudder Length (effective): 5.57 in. (142 mm)   20070321
00007343
Vertical Stabilizer Rudder Length is 138 mm at the hinge line. The Rudder Length is 145 mm at the trailing edge.
704 Vertical Stabilizer Rudder Chord (effective): 3.41 in. (87 mm)   20070321
00007344
The Vertical Stablizer Rudder Chord is 70 mm at the tip end. The Rudder Chord is 100 mm at the root end.
705 Vertical Stabilizer Rudder Area: 18.97 sq in. (122.40 sq cm)   20070321
00007345
706 Vertical Stabilizer Rudder Area relative to Wing Area: 33.29 %   20070325
00007346
707 Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle: 3.61 %   20070325
00007347
708 Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area: 31.28 %   20070321
00007348
709 Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area: 12.10 %   20070325
00007349
710 Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle: 17.70 %   20070325
00007350
711 Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area: 48.29 %   20070325
00007351
712 Vertical Stabilizer Rudder Hinges per Rudder: 2   20070321
00007352
713 Vertical Stabilizer Rudder Hinge Type: Flexible Live Low Gap   20070321
00007353
714 Vertical Stabilizer Rudder Hinge Material: Proprietary Super Strong   20070321
00007354
715 Vertical Stabilizer Rudder Hinge Adhesive: Cyanoacrylate   20070321
00007355
716 Vertical Stabilizer Rudder Hinges Pinned: Yes   20070321
00007356
717 Vertical Stabilizer Rudder Servo Required: Yes 2 Standard   20070321
00007357
718 Vertical Stabilizer Rudder Servo Location: In servo bay located in bottom of aft end of Fuselage   20070321
00007358
719 Vertical Stabilizer Rudder Servo Mounting Method: Tray (Wood)   20070321
00007359
723 Vertical Stabilizer Rudder Actuation Rod: Yes. Along hinge line and extending down into fuselage to connect to servo via steering arm   20070321
00007363
724 Vertical Stabilizer Color Left Schema: "USAF 01559" graphic on Khaki and Olive Drab   20070321
00007364
725 Vertical Stabilizer Color Left Main: Khaki & Olive Drab   20070321
00007365
726 Vertical Stabilizer Color Left Trim: Small Red & Black Elements   20070321
00007366
727 Vertical Stabilizer Color Left Lines: Gray   20070321
00007367
728 Vertical Stabilizer Color Left Rivets: 3D Khaki and Olive Drab   20070321
00007368
729 Vertical Stabilizer Color Left vs Right: Very Similar   20070321
00007369
730 Vertical Stabilizer Color Right Schema: "USAF 01159" graphic on Khaki & Olive Drab   20070321
00007370
731 Vertical Stabilizer Color Right Main: Khaki & Olive Drab   20070321
00007371
732 Vertical Stabilizer Color Right Trim: Small Red & Black Elements   20070321
00007372
733 Vertical Stabilizer Color Right Lines: Gray   20070321
00007373
734 Vertical Stabilizer Color Right Rivets: 3D Khaki & Olive Drab   20070321
00007374
735 Vertical Stabilizer Weight: .253 lbs (115 g)   20070321
00007375


739 WEIGHTS   Back to TOP 20070429
00007852
Please note the following convention for weights: When referring to the weight of a model without radio or engine (motor) (i.e. "empty"), the range between the Min and Max weights for the empty model reflect normal variations in production weights associated with material densities. When referring to the weight of a model complete with radio and engine (motor), the Min weight reflects the sum of the Min weight of the empty model plus the weight of the minimum size engine (motor) specified for the model plus the weight of a radio system using the minimum number of channels and servos required for basic remote control of this product. When referring to the weight of a model complete with radio and engine (motor), the Max weight reflects the sum of the Max weight of the empty model plus the weight of the maximum size engine (motor) specified for the model plus the weight of a radio system using the maximum number of channels and servos specified for this product.
744 Weight of Model Only without Radio or Engine Min: 7.09 lbs (3220.88 g)   20070324
00007857
745 Weight of Model Only without Radio or Engine Max: 7.44 lbs (3381.92 g)   20070324
00007858
746 Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min: 9.96 lbs (4527.38 g)   20070324
00007859
747 Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max: 10.56 lbs (4798.42 g)   20070324
00007860
750 Weight Flying with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: 10.69 lbs (4857.38 g)   20070324
00007863
751 Weight Flying with Radio & 2 stroke Engine & 11.65 (330ml) Fuel Max: 11.28 lbs (5128.42 g)   20070324
00007864


757 WING   Back to TOP 20070321
00007870
759 Part#: VMA-F590UW   20070325
00007379
760 Dimensions: Please See Note   20070321
00007380
The dimensions of the Wing include the mounting Saddle plus any Ailerons, Flaperons, Flaps or other control surfaces unless otherwise noted. The Aileron Quantity is the number of aileron segments. This is usually 2 with one aileron on the right wing panel plus one aileron on the left wing panel. The Aileron Length is expressed as the length per aileron segment. The Aileron Area is expressed as the total of the area of all aileron segments. Flaperons by design have the same specifications as ailerons. Flap dimensions are denoted in the same manner as ailerons. Flap Quantity is usually 2 (one on the left wing panel plus one on the right wing panel). Flap Length is the length of each flap segment and Flap Area is expressed as the total of the area of all flap segments.
761 Terminology: Please See Note   20070321
00007381
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
764 Wing Location: Attached to sides of Fuselage   20070321
00007384
765 Wing Span Tip to Tip: 55.59 in. (1412 mm)   20070321
00007385
766 Wing Span (effective): 55.59 in. (1412 mm)   20070321
00007386
767 Wing Chord at Root: 16.38 in. (416 mm)   20070321
00007387
The Wing Chord at Root was measured without considering the wing fairings that extend forward from the leading edge in the vicinity of the wing root.
768 Wing Chord at outboard end of Aileron: 7.68 in. (195 mm)   20070321
00007388
769 Wing Chord (effective): 12.03 in. (306 mm)   20070321
00007389
770 Wing Area: 668.62 sq in. (4313.66 sq cm)   20070321
00007390
771 Wing Width of Saddle (Effective): 8.67 in. (220 mm)   20070321
00007391
The Wing Saddle has an "Hourglass" shape. The saddle is 231 mm wide at the forward and aft ends. The saddle narrows to 199 mm in width at the midway point.
772 Wing Length of Saddle: 16.54 in. (420 mm)   20070321
00007392
773 Wing Area of Saddle only: 143.44 sq in. (925.40 sq cm)   20070321
00007393
774 Wing Area without Saddle: 525.18 sq in. (3388.26 sq cm)   20070321
00007394
775 Wing Airfoil Shape: Symmetrical   20070321
00007395
777 Wing Dihedral at Center: 0 degrees   20070321
00007397
779 Wing Taper along Leading Edge: Yes   20070321
00007399
780 Wing Taper Along Trailing Edge: Yes   20070321
00007400
781 Wing Thickness Maximum: 2.24 in. (57 mm)   20070321
00007401
782 Wing Material: Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.   20070321
00007402
783 Wing Construction Method: Built Up   20070321
00007403
784 Wing Construction Adhesive: PVA, Cyanoacrylate and Epoxy   20070321
00007404
785 Wing Sheeted Fully: Yes   20070321
00007405
790 Wing Plugs In to Fuselage: No. This is a "one piece" wing.   20070321
00007410
791 Wing Front attaches to Fuselage with: Wood dowel in leading edge of wing   20070321
00007411
792 Wing Back attaches to Fuselage with: 2 nylon bolts   20070321
00007412
793 Wing Requires Struts: No   20070321
00007413
806 Wing Ailerons Factory Installed: Yes   20070321
00007426
807 Wing Ailerons Quantity: 2   20070321
00007427
808 Wing Aileron Type: Semi-Strip (2)   20070321
00007428
809 Wing Aileron Length per Aileron (effective): 11.22 in. (285 mm)   20070321
00007429
810 Wing Aileron Chord (effective): 2.539 in. (65 mm)   20070321
00007430
Wing Aileron Chord tapers from 76 mm at the inboard end (closest to the fuselage) to 53 mm at the outboard end.
811 Wing Aileron Area: 56.99 sq in. (368 sq cm)   20070321
00007431
812 Wing Aileron Area relative to Wing Area: 8.52 %   20070321
00007432
813 Wing Aileron Area relative to Wing Area without wing saddle: 10.85 %   20070321
00007433
814 Wing Aileron Hinges per Aileron: 3   20070321
00007434
815 Wing Aileron Hinge Type: Flexible Live Low Gap   20070321
00007435
816 Wing Aileron Hinge Material: Proprietary Super Strong   20070321
00007436
817 Wing Aileron Hinge Adhesive: Cyanoacrylate   20070321
00007437
818 Wing Aileron Hinges Pinned: Yes   20070321
00007438
819 Wing Aileron Servo Required: Yes 2 Standard   20070321
00007439
820 Wing Aileron Servo Location: Bottom of Wing aligned approximately 30% outboard from inboard end of aileron   20070321
00007440
821 Wing Aileron Servo Rails: Yes in Servo Cavity   20070321
00007441
823 Wing Aileron Servo Wiring Tube: Yes   20070321
00007443
824 Wing Ailerons Flaperon Ready with Computer Radio: Yes   20070321
00007444
825 Wing Flaps Factory Installed: Yes   20070321
00007445
826 Wing Flaps Mandatory: No. Can be locked at neutral position   20070321
00007446
827 Wing Flaps Quantity: 2   20070321
00007447
828 Wing Flaps useable as Spoilers or Speed Brakes by deflecting upwards: Yes   20070426
00007448
829 Wing Flap Length per Flap (effective): 9.29 in. (236 mm)   20070321
00007449
830 Wing Flap Chord (effective): 3.130 in. (80 mm)   20070321
00007450
Wing Flap Chord tapers from 90 mm at the inboard end (closest to the fuselage) to 69 mm at the outboard end.
831 Wing Flaps Area: 58.16 sq in. (375 sq cm)   20070321
00007451
832 Wing Flap Area relative to Wing Area: 8.70 %   20070321
00007452
833 Wing Flap Area relative to Wing Area without wing saddle: 11.07 %   20070321
00007453
834 Wing Flap Hinges per Flap: 2   20070321
00007454
835 Wing Flap Hinge Type: Flexible Live Low Gap   20070321
00007455
836 Wing Flap Hinge Material: Proprietary Super Strong   20070321
00007456
837 Wing Flaps Hinge Adhesive: Cyanoacrylate   20070321
00007457
838 Wing Flap Hinges Pinned: Yes   20070321
00007458
839 Wing Flap Servo Required: Yes 2 Standard   20070321
00007459
840 Wing Flap Servo Location: Bottom of Wing aligned approximately with the inboard end of the flap   20070321
00007460
841 Wing Flap Servo Rails: Yes in Servo Cavity   20070321
00007461
843 Wing Flap Servo Wiring Tube: Yes   20070321
00007463
845 Wing Color Top Schema: Camoflage   20070321
00007465
846 Wing Color Top Main: Khaki and Olive Drab   20070321
00007466
847 Wing Color Top Trim: Single Stars and Bars (Red, White and Blue) Left US AIR FORCE text Right   20070321
00007467
848 Wing Color Top Lines: Gray   20070321
00007468
849 Wing Color Top Rivets: 3D Khaki and Olive Drab   20070321
00007469
850 Wing Color Top vs Bottom: Different   20070321
00007470
851 Wing Color Bottom Schema: Single Color with Small Elements   20070321
00007471
852 Wing Color Bottom Main: Khaki   20070321
00007472
853 Wing Color Bottom Trim: Single Stars and Bars (Red, White and Blue) Left. US AIRFORCE text Right   20070321
00007473
854 Wing Color Bottom Lines: Gray   20070321
00007474
855 Wing Color Bottom Rivets: 3D Khaki   20070321
00007475
856 Wing Weight: 1.64 lbs (745 g). Please See Note   20070321
00007476
The weight of the Wing is as it was when it is removed from the shipping box. This weight does NOT include the weight associated with any adhesives, spar joiners or other weight associated with end user assembly.


860 WING LOADING   Back to TOP 20070425
00007872
Please note the following convention for Wing Loading: When we say Min we mean the wing loading to be expected when using the minimum size engine (motor) specified for this model and the minimum number of servos specified for this model. When we say Max we mean the wing loading to be expected when using the maximum size engine (motor) specified for this model and the maximum number of servos specified for this model.
866 Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Min: 402.70 oz/sq ft (12.31 g/sq cm)   20070325
00007878
867 Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Max: 426.81 oz/sq ft (13.05 g/sq cm)   20070325
00007879
868 Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min: 432.06 oz/sq ft (13.21 g/sq cm)   20070325
00007880
869 Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max: 456.16 oz/sq ft (13.95 g/sq cm)   20070325
00007881


875 APPENDICES   Back to TOP 20070321
00007887
The Appendice tables below provide additional information associated with this product, it's components, it's packaging or other related information.


876 PACKING LIST   Back to TOP 20070323
00007888
881 Major Component: 1 Fuselage with pre-installed Control Rods, Servo Tray and Engine Mounts.   20070321
00007893
882 Major Component: 1 Wing (Factory built as one piece)   20070324
00007894
884 Major Component: 1 Horizontal Stabilizer with pre-installed Elevators   20070324
00007896
885 Major Component: 1 Vertical Stabilizer with pre-installed Rudder   20070324
00007897
887 Major Component: 1 Main Landing Gear Bag   20070321
00007899
888 Major Component: 1 Nose Gear Bag (may be shipped in Main Gear Parts Bag)   20070321
00007900
889 Major Component: 1 Master Bag of Hardware   20070321
00007901
890 Major Component: 1 Documentation Set   20070321
00007902
891 Major Component: Drop Tank (Dummy) and Screws   20070321
00007903
892 Major Component: Missile Set (Dummy)   20070321
00007904
894 Major Component: Canopy   20070324
00007906
895 Major Component: Spinner   20070324
00007907
896 Major Component: Retract Cavity Cover Set and Belly Pan   20070324
00007908
899 Master Bag contains: 1 Wing Parts Bag   20070321
00007911
900 Master Bag contains: 1 Control Horn Parts Bag   20070321
00007912
902 Master Bag contains: 1 Main Gear Parts Bag   20070324
00007914
904 Master Bag contains: 1 Nose Gear Parts Bag (packed in Main Gear Parts Bag)   20070324
00007916
907 Master Bag contains: 1 Miscellaneous Parts Bag (may be packed mixed with items in Spare Parts Bag)   20070324
00007919
908 Master Bag contains: 1 Spare Parts Bag   20070324
00007920
909 Master Bag contains: 1 Fuel Tank with stopper & clunk(s)   20070324
00007921
910 Master Bag contains: 1 Other Parts Bag   20070324
00007922
920 Wing Parts Bag contains: 4 Control Horn assemblies (2 for ailerons, 2 for flaps) each consisting of a metal nut, metal bolt & plastic horn, T-nut & bevelled washer   20070321
00007932
921 Wing Parts Bag contains: 2 Plastic wing mounting bolts   20070324
00007933
922 Wing Parts Bag contains: 2 Aileron control rods each with a clevis on each end   20070324
00007934
923 Wing Parts Bag contains: 2 Flap control rods each with a clevis on each end   20070321
00007935
927 Control Horn Parts Bag contains: 1 Rudder Control Rod with Clevis, EZ connector & Steering Arm   20070324
00007939
928 Control Horn Parts Bag contains: 2 Control Rods each with a Clevis on each end   20070324
00007940
929 Main Gear Parts Bag contains: 1 Main Gear (left) with Simulated Oleo Strut and Wheel with Collar   20070324
00007941
930 Main Gear Parts Bag contains: 1 Main Gear (right) with Simulated Oleo Strut and Wheel with Collar   20070324
00007942
940 Nose Gear Parts Bag contains: 1 Nose Gear with Simulated Oleo Strut with Wheel and Collar   20070324
00007952
941 Nose Gear Parts Bag contains: 1 Steering Arm with retaining screw   20070324
00007953
942 Nose Gear Parts Bag contains: 1 Wheel Collar   20070324
00007954
963 Miscellaneous Parts Bag contains: 1 Tray for optional servo for Nose Retract, 2 Wood Rails and 4 large self tapping Screws to attach the Engine to the Engine Mounts   20070324
00007975
964 Spare Parts Bag contains: 1 Control Horn assembly each consisting of a metal nut, metal bolt and plastic horn, T-nut and bevelled washer   20070324
00007976
965 Spare Parts Bag contains: 1 Plastic wing bolt   20070324
00007977
966 Spare Parts Bag contains: 1 Clevis   20070324
00007978
967 Spare Parts Bag contains: 1 Metal bolt (long) with washers and nut   20070324
00007979
970 Spare Parts Bag contains: 2 Extra Clevis Screws   20070324
00007982
972 Spare Parts Bag contains: 4 small wood Screws   20070326
00007984
973 Other Parts Bag contains: 8 pan head Phillips Screws for the Main Gear   20070324
00007985
974 Other Parts Bag contains: 1 Allen Wrench   20070324
00007986
978 Documentation Set contains: 1 Assembly and Operations Manual   20070321
00007990


986 PACKAGING (BOX 1 OF 2) - FUSELAGE   Back to TOP 20070323
00007998
This Product is shipped in 2 boxes. The following information pertains to Box 1 of 2. This box contains the Fuselage and may contain other smaller components.
987 Dimensions: Please See Note   20070321
00007999
The Display Box contains the product and is intended for display in a retail or end user environment. The Display Box weight also includes the weight of the protective Shipping Bog. The Shipping Box completely surrounds and contains the Display Box and the product itself.
988 Terminology: Please See Note   20070321
00008000
The term "Length" refers to the longest side of a box, "Width" refers to the second longest side and "Height" refers to the shortest side of a box. The term "Girth" refers to the sum of the Width + Width + Height + Height. Think of this as the distance around (i.e. waistline) an object. The term "Length + Girth" refers to the sum of the Length plus the Girth and is used by some carriers for the calculation of size limits. The term "Volume" refers to the multiple of the Length x Width x Height. The term "Density" refers to Weight/Volume. The term "Dimensional Weight" refers to the weight that is calculated for an object assuming a density requirement of X lbs per cubic foot where X is typically in the range of 8 to 15 lbs/cuft. Carriers charge freight based on the larger of the actual Weight or the Dimensional Weight. For light bulky items such as ARF model airplanes the Dimensional Weight is usually the larger and many carriers use this as the basis for shipping charges. Air Shipments always use the Dimensional Weight applicable for Air Shipments. For reference purposes we show Dimensional Weights here for both Ground and Air shipments.
991 Packaging: 1 Shipping Box   20070321
00008003
993 Packaging: 1 Plastic Shipping Bag   20070321
00008005
994 Packaging: 1 Display Box   20070321
00008006
995 Display Box Material: White Cardboard with Color Label   20070321
00008007
996 Display Box Weight with Contents: 9.50 lbs (4318 g)   20070324
00008008
997 Display Box Size Outside Length: 62.60 in. (1590 mm)   20070324
00008009
998 Display Box Size Outside Width: 10.55 in. (268 mm)   20070324
00008010
999 Display Box Size Outside Height: 9.06 in. (230 mm)   20070324
00008011
1000 Display Box Size Outside Length + Width + Height: 82.20 in. (2088 mm)   20070324
00008012
1001 Display Box Size Outside Length + Girth: 101.81 in. (2586 mm)   20070324
00008013
1002 Display Box Size Outside Volume: 3.46 cu ft. (.10 cbm)   20070324
00008014
1003 Display Box Size Outside Density: 2.74 lbs/cu ft. (44 kg/cbm)   20070324
00008015
1004 Display Box Label Colors Primary: Red, White & Black   20070324
00008016
1005 Display Box Label Coverage Front: 41.93 x 9.76 in. (1065 248 mm)   20070324
00008017
1008 Display Box Label End Panel A: 3.74 x .75 in. (95 19 mm)   20070324
00008020
1011 Shipping Box Material: Brown Cardboard with inner Plywood Shields   20070324
00008023
1012 Shipping Box Weight with Contents: 12.60 lbs (5727 g)   20110223
00008024
1013 Shipping Box Size Outside Length: 64.17 in. (1630 mm)   20110223
00008025
1014 Shipping Box Size Outside Width: 11.34 in. (288 mm)   20110223
00008026
1015 Shipping Box Size Outside Height: 9.49 in. (241 mm)   20110223
00008027
1016 Shipping Box Size Outside Length + Width + Height: 85.00 in. (2159 mm)   20110223
00008028
1017 Shipping Box Size Outside Length + Girth: 105.83 in. (2688 mm)   20110223
00008029
1018 Shipping Box Size Outside Volume: 4.00 cu ft. (.11 cbm)   20110223
00008030
1019 Shipping Box Size Outside Density: 3.15 lbs/cu ft. (51 kg/cbm)   20110223
00008031
1020 Shipping Box has a Dimensional Weight of: 35.59 lbs @ UPS Ground Requirement of 8.91 lbs/cu ft. (per factor of 194.00)   20110223
00008032
1021 Shipping Box has a Dimensional Weight of: 41.59 lbs @ UPS Air Requirement of 10.41 lbs/cu ft. (per factor of 166.00)   20110223
00008033


1026 PACKAGING (BOX 2 OF 2) - WING   Back to TOP 20070324
00008178
This Product is shipped in 2 boxes. The following information pertains to Box 2 of 2. This box contains the Wing and may contain other smaller components.
1027 Dimensions: Please See Note   20070324
00008179
The Display Box contains the product and is intended for display in a retail or end user environment. The Display Box weight also includes the weight of the protective Shipping Bog. The Shipping Box completely surrounds and contains the Display Box and the product itself.
1028 Terminology: Please See Note   20070324
00008180
The term "Length" refers to the longest side of a box, "Width" refers to the second longest side and "Height" refers to the shortest side of a box. The term "Girth" refers to the sum of the Width + Width + Height + Height. Think of this as the distance around (i.e. waistline) an object. The term "Length + Girth" refers to the sum of the Length plus the Girth and is used by some carriers for the calculation of size limits. The term "Volume" refers to the multiple of the Length x Width x Height. The term "Density" refers to Weight/Volume. The term "Dimensional Weight" refers to the weight that is calculated for an object assuming a density requirement of X lbs per cubic foot where X is typically in the range of 8 to 15 lbs/cuft. Carriers charge freight based on the larger of the actual Weight or the Dimensional Weight. For light bulky items such as ARF model airplanes the Dimensional Weight is usually the larger and many carriers use this as the basis for shipping charges. Air Shipments always use the Dimensional Weight applicable for Air Shipments. For reference purposes we show Dimensional Weights here for both Ground and Air shipments.
1031 Packaging: 1 Shipping Box   20070324
00008183
1032 Packaging: 2 Plywood Shipping Shield   20070324
00008184
1033 Packaging: 1 Plastic Shipping Bag   20070324
00008185
1034 Packaging: 1 Display Box   20070324
00008186
1035 Display Box Material: White Cardboard with Color Label   20070324
00008187
1036 Display Box Weight with Contents: 11.95 lbs (5432 g)   20070324
00008188
1037 Display Box Size Outside Length: 62.52 in. (1588 mm)   20070324
00008189
1038 Display Box Size Outside Width: 21.85 in. (555 mm)   20070324
00008190
1039 Display Box Size Outside Height: 4.33 in. (110 mm)   20070324
00008191
1040 Display Box Size Outside Length + Width + Height: 88.70 in. (2253 mm)   20070324
00008192
1041 Display Box Size Outside Length + Girth: 114.88 in. (2918 mm)   20070324
00008193
1042 Display Box Size Outside Volume: 3.42 cu ft. (.10 cbm)   20070324
00008194
1043 Display Box Size Outside Density: 3.49 lbs/cu ft. (56 kg/cbm)   20070324
00008195
1044 Display Box Label Colors Primary: Red, White & Black   20070324
00008196
1045 Display Box Label Coverage Front: 41.93 x 20.47 in. (1065 520 mm)   20070324
00008197
1048 Display Box Label End Panel A: 3.74 x .75 in. (95 19 mm)   20070324
00008200
1051 Shipping Box Material: Brown Cardboard with inner Plywood Shields   20070324
00008203
1052 Shipping Box Weight with Contents: 17.40 lbs (7909 g)   20070325
00008204
1053 Shipping Box Size Outside Length: 63.90 in. (1623 mm)   20070325
00008205
1054 Shipping Box Size Outside Width: 22.83 in. (580 mm)   20070325
00008206
1055 Shipping Box Size Outside Height: 4.92 in. (125 mm)   20070325
00008207
1056 Shipping Box Size Outside Length + Width + Height: 91.65 in. (2328 mm)   20070325
00008208
1057 Shipping Box Size Outside Length + Girth: 119.41 in. (3033 mm)   20070325
00008209
1058 Shipping Box Size Outside Volume: 4.16 cu ft. (.12 cbm)   20070325
00008210
1059 Shipping Box Size Outside Density: 4.19 lbs/cu ft. (67 kg/cbm)   20070325
00008211
1060 Shipping Box has a Dimensional Weight of: 37.01 lbs @ UPS Ground Requirement of 8.91 lbs/cu ft. (per factor of 194.00)   20070325
00008212
1061 Shipping Box has a Dimensional Weight of: 43.26 lbs @ UPS Air Requirement of 10.41 lbs/cu ft. (per factor of 166.00)   20070325
00008213


1066 PRECISION   Back to TOP 20100217
00008038
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice Within the limitations of this Condition of Use and the Liability Disclaimer, the data published here is intended to meet the following standards of precision.
1072 Units of Measure: All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial.   20070106
00003923
1073 In general, measurements are accurate to within: + - 3% except + - .30 for measurements of magnitude 10.0 or less.   20070106
00003916
1074 Distances such as length, width, depth, thickness etc are measured to the nearest: 1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less   20070106
00003917
When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision.
1075 Weights and Mass are measured to the nearest: 1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less   20070106
00003924
1076 Volumes related to fluids are measured to the nearest: 1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less   20070106
00003925
1077 Volumes related to non-fluids are measured to the nearest: .01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less.   20070106
00003926

20120828 04:11:21 PST. Subject to Change Without Notice.
Copyright Richmond RC Supply Ltd. VMA-F590U_spec.htm