PRODUCT INFORMATION

VMA-F590G

VMAR F5E TIGER II 60-91 JET (PROP) ARF 3DS - GRAY

TABLE OF CONTENTS
CONDITIONS OF USE			1
SUMMARY INFORMATION			2
	GENERAL SUMMARY		3
	SPECIFICATIONS SUMMARY		18
	TECHNICAL SUMMARY		44
KNOWLEDGE BASE			67
	Knowledge Base - DIRECTORY (TOC)		68
	Knowledge Base - HOW TO		69
	Knowledge Base - PRIORITY RESPONSE TICKETS		72
	Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE		73
	Knowledge Base - SUPPORT SERVICES		74
DETAILED SPECIFICATIONS			75
	ACCESSORIES INCLUDED		76
	CLEANING		102
	COVERING		114
	COWL		141
	ENGINE		171
	ENGINE MOUNT SYSTEM		198
	ENGINE MOUNT		209
	FUEL TANK		231
	FUSELAGE		258
	LANDING GEAR		322
	RADIO SYSTEM		454
	SERVO MOUNTING		489
	SET UP		552
	STABILIZER - HORIZONTAL & ELEVATOR		590
	STABILIZER - VERTICAL & RUDDER		665
	WEIGHTS		739
	WING		757
	WING LOADING		860
APPENDICES			875
	PACKING LIST		876
	PACKAGING (BOX 1 OF 2) - FUSELAGE		986
	PACKAGING (BOX 2 OF 2) - WING		1026
	PRECISION		1066

1	CONDITIONS OF USE	Back to TOP	20100217 00008603
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice

2	SUMMARY INFORMATION	Back to TOP	20100211 00008604
The Summary tables below provide the most commonly requested Information, Specifications & Technical data.

3	GENERAL SUMMARY	Back to TOP	20100211 00008605
8	Part#:	VMA-F590G	20110223 00008610
9	Description:	VMAR F5E TIGER II 60-91 JET (PROP) ARF 3DS - GRAY	20110223 00008611
10	Highlights:	MAP IN EFFECT - WITH VCOTE-2 3D DETAILING SYSTEM	20110223 00008612
11	Price List & Web Category:	VMA Products AIRPLANE KITS ARF JET (PROP)	20110223 00008613
12	$USA Retail:	299.99	20110223 00008614
13	$CDN Retail:	329.99	20110223 00008615
14	Start Ship Date:	20050515	20110223 00008616

18	SPECIFICATIONS SUMMARY	Back to TOP	20070325 00008620
27	Type:	Jet (Prop) .60-.91 ARF Low-Mid Wing Trike	20070325 00008629
28	Skill:	For those with intermediate or better RC Flying skills	20070325 00008630
29	Cowl:	No	20070325 00008631
30	Landing Gear Type:	Trike	20070325 00008632
31	Engine 2 Stroke:	.60 to .91 cu in. (.91 Recommended)	20070325 00008633
33	Fuselage Length with Stabilizers:	61.42 in. (1560 mm)	20070325 00008635
34	Radio for Basic Remote Control of this product:	Analog or Computer 4 Channels with 6 Servos	20070325 00008636
35	Radio with Flaperons + Flaps:	Computer 6 Channels with 8 Servos	20070325 00008637
36	Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min:	9.96 lbs (4527.38 g)	20070325 00008638
37	Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max:	10.56 lbs (4798.42 g)	20070325 00008639
38	Wing Airfoil Shape:	Symmetrical	20070325 00008640
39	Wing Area:	668.62 sq in. (4313.66 sq cm)	20070325 00008641
40	Wing Span:	55.59 in. (1412 mm)	20070325 00008642

44	TECHNICAL SUMMARY	Back to TOP	20070325 00008646
56	Engine Mounting System:	Fixed firewall permanently attached to fuselage	20070427 00008658
57	Fuselage Pushrods Factory Installed:	Yes	20070325 00008659
58	Fuselage Pilot Factory Installed:	Yes. 3D Pilot Bust	20070325 00008660
59	Wing Ailerons Flaperon Ready with Computer Radio:	Yes	20070325 00008661
60	Wing Flaps Factory Installed:	Yes	20070325 00008662
61	Wing Plugs In to Fuselage:	No. This is a "one piece" wing.	20070325 00008663
62	Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min:	36.82 oz/sq ft (1.13 g/sq cm)	20070325 00008664
63	Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max:	38.88 oz/sq ft (1.19 g/sq cm)	20070325 00008665

67	KNOWLEDGE BASE	Back to TOP	20070325 00008669
Our Knowledge Base provides 24x7x365 access to an extensive and growing library of support & service offerings. This On-Line resource contains thousands of articles, answers to frequently asked questions (FAQ), operations manuals, additional information not found in the manuals, graphic files for download and access to our Priority Response system for Ticket Management and RMA numbers for authorised returns.

68	Knowledge Base - DIRECTORY (TOC)	Back to TOP	20070325 00008670
Knowledge Base - Directory (TOC) Listing This link goes directly to the top level of our Knowledge Base and offers a Directory Table of Contents (TOC) listing. This is a good way to enter the Knowledge Base if you don't know exactly what you are looking for and want an overview of what is available. The Table of Contents (TOC) is sorted alphabetically and you will see near the top of the list, links to Site How To, Support Services, and Subscriptions. Further down in the list you will see links to Technical Information. Before diving into the specifics, we encourage users to check out the Site How To information. Technical Information is organized into product lines or categories and usually within a particular product line or category there is a section for General information and another for detailed information on a Product by Product basis. It's a good idea to review the General Information AND the Product by Product information. Use the "Search" tool located in the top left of the Knowledge Base window to search by product name, part number or key words. The "Advanced Search" provides for powerful SQL based filtering to narrow your search results.

69	Knowledge Base - HOW TO	Back to TOP	20070325 00008671
Knowledge Base - How To and News This link goes directly to the Site How To section of our Knowledge Base and offers Help on How To work with Tickets, How To Search our Knowledge Base etc.

72	Knowledge Base - PRIORITY RESPONSE TICKETS	Back to TOP	20070325 00008673
Knowledge Base - Priority Response Tickets This link goes directly to the Knowledge Base Priority Response login screen. Login is required to use the Priority Response Ticket System. New Users who are trying to login for the First Time will need to Register First. Registration takes a minute or less. Users may find the following link helpful Knowledge Base - Priority Response Tickets - Help and How To

73	Knowledge Base - PRIORITY RESPONSE NOTIFICATION SERVICE	Back to TOP	20070325 00008674
Knowledge Base - Priority Response Notification Service This link goes directly to the Priority Response Notification Service section of our Knowledge Base where we offer information about how to subscribe to automatic Notifications of changes or additions to articles related to a particular product. Priority Response registered members can receive automatic updates to information related to the products they are interested in. Subscribers can elect to monitor information about one product or one subject or dozens of any mix of either.

74	Knowledge Base - SUPPORT SERVICES	Back to TOP	20070325 00008675
Knowledge Base - Support Services This link goes directly to the Support Services section of our Knowledge Base where we offer information related to Contacts, Claims for Missing or Shipping Damaged Components, Warranty Claims, Return Procedures, Subscription Services for Automatic Notification and Shipping Information.

75	DETAILED SPECIFICATIONS	Back to TOP	20070325 00008676
The Detailed Specification tables below provide highly detailed technical information about this product and components that make up this product. Set Up values and calculated Performance Data are also provided where applicable.

76	ACCESSORIES INCLUDED	Back to TOP	20070325 00008677
89	Accessories Drop Tank:	Yes. Please See Note.	20070325 00008690
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
95	Accessories Missile Set:	Yes. Please See Note	20070325 00008696
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
97	Accessories Spinner:	Yes. Please See Note	20070325 00008698
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component

102	CLEANING	Back to TOP	20070325 00008703
107	Cleaning Caution:	Do NOT NOT NOT clean with Simple Green, 409, 2-butoxymethanol, Butyl Cellulose, Glycol Ethers or Solvents. Test all plastics first. Test small area of covering first. Avoid dousing or flooding. Lightly spray only. Please See Notes.	20070325 00008708
Before cleaning this product either before or after use, thoroughly review any Read Me First documents that may have been included with this product AND the information at the following link: VMAR - Cleaning Model Aircraft
108	Recommended Cleaner:	Fantastic diluted up to 50/50 with water	20070325 00008709
109	Cleaning Method:	Do NOT NOT NOT spray any cleaner directly onto plastic parts or canopy without first testing thoroughly. Mist cleaner onto model, then wipe gently with paper towel.	20070325 00008710
110	Polishing Method:	Spray Armorall onto paper towel then wipe onto surface of model. Use another paper towel or soft cloth to buff to high gloss.	20100201 00008711

114	COVERING	Back to TOP	20070325 00008715
119	Covering Caution:	Please See Note	20070325 00008720
Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information
120	Covering Factory Applied:	Yes	20070325 00008721
121	Covering Type:	VCOTE2-3DS (3D Detailing System)	20070325 00008722
122	Covering Material:	Heat Shrink Film with Heat Activated Adhesive	20070325 00008723
123	Covering Heat Shrinkable:	Yes, with Medium to High Temperature	20070325 00008724
124	Covering Seams:	Minimal. Sealed with Sure Seal System	20070325 00008725
125	Covering Repairable:	Yes with Heat Iron and Heat Gun	20070325 00008726
126	Covering Repair & Maintenance Method:	Please See Note	20100207 00008727
Please do NOT assume that this covering has the same characteristics as older or other covering systems. It may but it may not and diving into a repair without preparing can be an expensive one way trip into trouble. Before attempting covering maintenance or repairs, thoroughly review any Read Me First documents that may have have been included with your model AND the information at the following link: VMAR - Covering - General Information
127	Covering Patch Sheets Available:	Yes, as an aftermarket item. Please See Note	20070325 00008728
For covering patch sheets, please consult the spare parts listing for this product.
128	Covering Sets Available:	Yes, as an aftermarket item. Please See Note	20070325 00008729
For covering sets consisting of original factory covering sheets, please consult the spare parts listing for this product. Covering sets are intended for aftermarket application following large scale repairs to major components such as wings, fuselages and stabilizers.
129	Covering Fuelproof Caution:	If above 15% Nitro Test All Plastics First	20070325 00008730
130	Covering Graphics Factory Applied:	Yes	20070325 00008731
131	Covering Graphics Inside the Covering:	Yes. Between the Base Layer and the Clear Top Layer	20070325 00008732
132	Covering Fuelproof to Glow Fuel:	Yes for common model engine glow fuel to at least 25% nitromethane.	20070325 00008733
133	Covering Decals:	No. All graphics factory applied	20070325 00008734
134	Covering Fuelproof to other Model Fuel:	No known issues. Please See Note.	20070325 00008735
Caution: Avoid applying raw fuel of any type onto the model. Test all plastics first. Test small out of sight area of covering first.
135	Covering Layers:	No.	20070325 00008736
136	Covering Strips:	No.	20070325 00008737
137	Covering Stripes:	No.	20070325 00008738

141	COWL	Back to TOP	20070325 00008742
142	Cowl On this model:	No	20070325 00008743

171	ENGINE	Back to TOP	20070325 00008745
176	Engine Location:	Front end of Fuselage	20070325 00008750
177	Engine Location of Propeller:	Forward of Engine (Tractor)	20070325 00008751
178	Engine Orientation:	90 degrees (Head Facing Right)	20070325 00008752
179	Engine Quantity:	1	20070325 00008753
180	Engine 2 Stroke Minimum Size:	.60 cu in. (9.83 cu cm)	20070325 00008754
181	Engine 2 Stroke Maximum Size:	.91 cu in. (14.91 cu cm)	20070325 00008755
182	Engine 2 Stroke Recommended Size:	.91 cu in. 14.91 cu cm)	20070325 00008756
186	Engine 4 Stroke Recommendation:	This model has been designed to accomodate 2 stroke engines. No provision has been made for the use of 4 stroke engines in this model.	20070325 00008760
187	Engine Horizontal Thrust Adjustable:	Yes by inserting washers	20070325 00008761
188	Engine Horizontal Thrust Recommended:	0 degrees	20070325 00008762
189	Engine Horizontal Thrust Maximum Angle:	3 degrees Right	20070325 00008763
190	Engine Vertical Thrust Adjustable:	Yes by adjusting position of engine on engine mount beams	20070325 00008764
191	Engine Vertical Thrust Recommended:	0 degrees	20070325 00008765
192	Engine Vertical Thrust Maximum Angle:	2 degrees Down	20070325 00008766
193	Engine Replace with Electric Motor:	Please See Note	20070325 00008767
If your model is equipped with a Power Module (see section re Engine Mount System) then conversion to Electric Motor power is likely possible. For more information please click on the following link: More Information about Electric Power Conversions & Requirements
194	Engine Replace with Jet (Turbine):	Not Recommended. Please See Note	20070325 00008768
This model has been designed to use a 2 stroke engine mounted in the nose and turning a propeller in a standard "tractor" power configuration. For information about converting this model to use Jet (Turbine) power please click on the following link: More Information about Jet (Turbine) Conversions & Requirements

198	ENGINE MOUNT SYSTEM	Back to TOP	20070325 00008772
204	Engine Mounting System:	Fixed firewall permanently attached to fuselage	20070427 00003534
205	Engine Mount Firewall Drilled for Engine Mount:	Yes	20070427 00003536

209	ENGINE MOUNT	Back to TOP	20110223 00008774
210	Engine Mount Quantity:	1 Set for 1 Engine	20070325 00008775
211	Engine Mount Installed:	Yes	20070325 00008776
212	Engine Mount Engine Width Max:	1.57 in. (40 mm)	20070325 00008777
215	Part#:	RRC-MOUNTUPP	20110223 00005270
220	Engine Mount Type:	T-Bar Beams (2) without clamp plates or fasteners	20070131 00005294
221	Engine Mount Material:	Composite T-Bar Beams	20070131 00005293
222	Engine Mount Attaches to Firewall with:	2 Machine Bolts per T-Bar Beam	20070131 00005277
223	Engine Mount Retains Engine with:	End user supplied Fasteners	20070131 00005278
224	Engine Mount Drilling Required:	Yes	20070131 00005279
225	Engine Mount Drilling Optional:	No. Must Drill	20070131 00005280
226	Engine Mount Mounting Bolt Type:	Black Allen Head Machine Bolts with Washers and Fiber Insert Lock Nuts recommended	20070131 00005281

231	FUEL TANK	Back to TOP	20070325 00008779
232	Fuel Tank Included:	Yes	20070325 00008780
233	Fuel Tank Installation:	Mounts aft of firewall in fuel tank compartment	20070325 00008781
234	Fuel Tank is Accessible by:	Removing Canopy (screws) and Cockpit Tub (screws)	20070325 00008782
237	Part#:	VMA-TANK3503	20100328 00003866
242	Fuel Tank Material:	Plastic	20061231 00001768
243	Fuel Tank Metal Tubes Included:	3 (Straight)	20070203 00001769
244	Fuel Tank Flexible Tubing Included:	No. Select for fuel type.	20061228 00001770
245	Fuel Tank Safety Stopper System:	Yes. Metal overcap retains stopper and prevents tank neck from splitting.	20061221 00001881
246	Fuel Tank Stopper Compatibility:	Glow Fuel Only	20061221 00001771
247	Fuel Tank Clunk:	Yes	20061221 00001772
248	Fuel Tank Length (external not including neck):	5.16 in. (131 mm)	20110330 00001884
249	Fuel Tank Width A (external):	2.40 in. (61 mm)	20061221 00001885
250	Fuel Tank Width B (external):	2.05 in. (52 mm)	20061221 00001886
251	Fuel Tank Capacity:	11.645 oz. (330 ml)	20070106 00001773
252	Fuel Tank Installation Gasket:	Yes	20061221 00001882
253	Fuel Tank Weight (empty):	.132 lbs (60 g). Please See Note	20070207 00001888
The Fuel Tank Weight (empty) includes the tank, clunk, stopper, metal tubes and gasket. It does NOT include any flexible fuel tubing inside the tank.
254	Fuel Tank Weight (full):	.862 lbs (392 g). Please See Note	20070207 00001889
The Fuel Tank Weight (full) includes the tank, clunk, stopper, metal tubes, gasket, flexible fuel tubing inside the tank and a full load of glow fuel. The weight does not include the weight of any external fuel tubing.

258	FUSELAGE	Back to TOP	20070325 00008784
260	Part#:	VMA-F590GF	20070325 00008240
261	Dimensions:	Please See Note	20070325 00008241
Fuselage Length is with Stabilizers and without Spinner unless otherwise noted.
262	Terminology:	Please See Note	20070325 00008242
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped.
265	Fuselage Location:	Above Wing	20070325 00008245
266	Fuselage Length with Stabilizers:	61.42 in. (1560 mm)	20070325 00008246
267	Fuselage Length with Stabilizers and Spinner:	65.79 in. (1671 mm)	20070325 00008247
268	Fuselage Length without Stabilizers or Spinner:	61.42 in. (1560 mm)	20070325 00008248
269	Fuselage External Horizontal Width Maximum:	9.17 in. (233 mm)	20070325 00008249
270	Fuselage External Horizontal Width at Firewall:	4.21 in. (107 mm)	20070325 00008250
271	Fuselage External Vertical Thickness Maximum:	8.98 in. (228 mm)	20070325 00008251
272	Fuselage External Vertical Thickness at Firewall:	4.13 in. (105 mm)	20070325 00008252
273	Fuselage Internal Width of Radio Bay (effective):	5.85 in. (149 mm)	20070325 00008253
Radio Bay internal width tapers from 162 mm at the forward former to 135 mm at the aft former.
274	Fuselage Internal Height of Radio Bay (effective):	3.80 in. (97 mm)	20070325 00008254
Radio Bay internal height varies from 100 mm at the forward former to 93 mm at the aft former. The turtle deck cavity is not included in these measurements.
275	Fuselage Internal Length of Radio Bay (effective):	7.99 in. (203 mm)	20070325 00008255
276	Fuselage Internal Volume of Radio Bay:	177.52 cu in. (2909 cu cm)	20070325 00008256
277	Fuselage Material:	Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.	20070325 00008257
278	Fuselage Construction Method:	Built Up	20070325 00008258
279	Fuselage Wing Saddle Tape:	No.	20070325 00008259
280	Fuselage Sheeted Fully:	Yes	20070325 00008260
281	Fuselage Construction Adhesive:	PVA, Cyanoacrylate and Epoxy	20070325 00008261
282	Fuselage Shape of Main Section:	Complex semi-scale cross section	20070325 00008262
283	Fuselage Shape of Turtle Deck:	Elliptical sloping aft to nearly flat at tail	20070325 00008263
284	Fuselage Hatches:	Yes 1 on bottom. Rear hatch near tail for access to radio bay	20070325 00008264
285	Fuselage Pushrods Factory Installed:	Yes	20070325 00008265
286	Fuselage Pushrods Rudder:	1	20070325 00008266
288	Fuselage Pushrods Throttle:	1	20070325 00008268
289	Fuselage Pushrod Material:	Inner & outer plastic tubes with metal end rods	20070325 00008269
290	Fuselage Pushrods Threaded:	Yes on one end	20070325 00008270
291	Fuselage Pushrods In Guide Tubes:	Yes	20070325 00008271
293	Fuselage Canopy Factory Installed:	Yes. After factory fitting the canopy is removed for shipping	20070325 00008273
294	Fuselage Canopy attached to Fuselage with:	Screws. Canopy can be removed and then reattached. Please See Note	20070325 00008274
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
295	Fuselage Pilot Factory Installed:	Yes. 3D Pilot Bust	20070325 00008275
296	Fuselage Cockpit Instrument Panel:	Yes	20070325 00008276
298	Fuselage Cockpit "Tub":	Yes	20070325 00008278
299	Fuselage Cockpit "Tub" attached to Fuselage with:	Screws. Cockpit Tub can be removed and then reattached	20070325 00008279
300	Fuselage Color Top Schema:	Predominantly One Color	20070325 00008280
301	Fuselage Color Top Main:	Gray	20070325 00008281
302	Fuselage Color Top Trim:	Thin Black ring around nose. Gray at Tail	20070325 00008282
303	Fuselage Color Top Lines:	Gray	20070325 00008283
304	Fuselage Color Top Rivets:	3D Gray and Gray graphics	20070325 00008284
305	Fuselage Color Top vs Bottom:	Different	20070325 00008285
306	Fuselage Color Bottom Schema:	Predominantly One Color	20070325 00008286
307	Fuselage Color Bottom Main:	White	20070325 00008287
308	Fuselage Color Bottom Trim:	Gray Tail	20070325 00008288
309	Fuselage Color Bottom Lines:	Gray	20070325 00008289
310	Fuselage Color Bottom Rivets:	3D Gray and Gray graphics	20070325 00008290
311	Fuselage Color Left Side Schema:	Gray with VMA AW121 designator	20070325 00008291
313	Fuselage Color Left vs Right:	Similar	20070325 00008293
314	Fuselage Color Side Main:	Gray	20070325 00008294
315	Fuselage Color Side Trim:	"Stars & Bars". 69 US MARINES near Nose Black & Red text & elements. Gray tail	20070325 00008295
316	Fuselage Color Side Lines:	Gray	20070325 00008296
317	Fuselage Color Side Rivets:	3D Gray and Gray graphics	20070325 00008297
318	Fuselage Weight:	2.37 lbs (1079 g). Please See Note	20070325 00008298
The weight of the Fuselage is as it was when it is removed from the shipping box. This weight does NOT include weight related to any power systems, radio gear, control surfaces or other weight associated with end user assembly.

322	LANDING GEAR	Back to TOP	20070325 00008786
327	Landing Gear Type:	Trike	20070325 00008791
328	Nose Gear Included:	Yes	20070325 00008792
329	Nose Gear Mounted to:	Firewall (Nose Gear Block)	20070325 00008793
330	Nose Gear Axle points to the:	Left	20070325 00008794
331	Nose Gear Vertical Distance of Axle from Fuselage:	6.0 in. (152 mm)	20070325 00008795
332	Nose Gear Wheel Quantity:	1	20070325 00008796
333	Nose Gear Wheel Tire Material:	Rubber	20070325 00008797
334	Nose Gear Wheel Hub Material:	Metal	20070325 00008798
335	Nose Gear Wheel Diameter:	2.362 in. (60 mm)	20070325 00008799
336	Nose Gear Wheel Treaded:	Yes Regular	20070325 00008800
337	Nose Gear Wheel Pant:	No	20070325 00008801
338	Nose Gear Retract Ready:	Yes	20070331 00008802
340	Nose Gear Steerable:	Yes	20070325 00008804
341	Nose Gear Steers from:	Left Side	20070325 00008805
342	Please Note:	The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below.	20070325 00008806
344	Part#:	VMA-F590XNGB	20070325 00008088
349	Nose Gear Material:	Wire	20070321 00008093
350	Nose Gear Shock Coil:	Yes	20070321 00008094
353	Nose Gear Wire Length from Axle to Coil:	5.20 in. (132 mm)	20070321 00008097
354	Nose Gear Wire Length above Coil:	2.05 in. (52 mm)	20070321 00008098
355	Nose Gear Material:	Wire	20070321 00008099
356	Nose Gear Shock Absorbing:	Yes. Shock Absorption via coil in wire	20070321 00008100
361	Nose Gear Wire Diameter:	.197 in. (5.000 mm)	20070321 00008105
362	Nose Gear Shaped by Factory:	Yes	20070321 00008106
363	Nose Gear Axle Provided:	Yes	20070321 00008107
364	Nose Gear Collars Provided:	Yes 1	20070321 00008108
365	Nose Gear Weight (without wheel):	.15 lbs (70 g). Please See Note	20070321 00008109
The weight of the nose gear does not include the weight of wheel.
369	Main Gear Included:	Yes. 1 Right and 1 Left	20070325 00008808
370	Main Gear Stance between center of wheels:	23.98 in. (609 mm)	20070325 00008809
371	Main Gear Mounted to:	Wing	20070325 00008810
372	Main Gear Axles point:	Outboard	20070325 00008811
373	Main Gear Vertical Distance of Axle from Wing:	4.61 in. (117 mm)	20070325 00008812
374	Main Gear Wheel Quantity per Gear:	1	20070325 00008813
375	Main Gear Wheel Tire Material:	Rubber	20070325 00008814
376	Main Gear Wheel Hub Material:	Metal	20070325 00008815
377	Main Gear Wheel Diameter:	3.15 in. (80 mm)	20070325 00008816
378	Main Gear Wheels Treaded:	Yes Regular	20070325 00008817
379	Main Gear Wheel Pants:	No	20070325 00008818
380	Main Gear Retract Ready:	Yes	20070331 00008819
382	Please Note:	The following specifications refer to additional related components included with this product and also made available as spare (replacement) parts per the part number (Part#) shown below.	20070325 00008821
384	Part#:	VMA-F590XMGB	20071031 00008040
389	Main Gear Material:	Wire	20070321 00008045
390	Main Gear Shock Coil:	Yes	20070321 00008046
391	Main Gear Struts (Simulated) Provided:	Yes	20070321 00008047
392	Main Gear Struts (Simulated) Pre-Assembled:	Yes	20070321 00008048
393	Main Gear Wire Length (effective) from Axle to Torque Segment:	5.51 in. (140 mm)	20070321 00008049
394	Main Gear Wire Length of Torque Segment parallel to Wing:	1.50 in. (38 mm)	20070321 00008050
395	Main Gear Wire Length of Torque Segment inside and perpendicular to Wing:	.83 in. (21 mm)	20070321 00008051
404	Main Gear Wire Diameter:	.197 in. (5.000 mm)	20070321 00008060
405	Main Gear Shaped by Factory:	Yes	20070321 00008061
406	Main Gear Axles Provided:	Yes 2 as part of main gear	20070321 00008062
407	Main Gear Collars Provided:	Yes. 1 per axle	20070321 00008063
408	Main Gear Weight (without wheels):	.39 lbs (176 g). Please See Note	20070321 00008064
The weight of the main gear does not include the weight of wheels.

454	RADIO SYSTEM	Back to TOP	20070325 00008836
459	Radio Complete System Factory Installed:	No. Radio System NOT Included	20070325 00008841
460	Radio Receiver Installed:	No. Receiver NOT Included	20070325 00008842
461	Radio Servos Installed:	No. Servos NOT Included	20070325 00008843
462	Radio for Basic Remote Control of this product:	Analog or Computer 4 Channels with 6 Servos	20070325 00008844
463	Radio for Basic Remote Control - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons	20070325 00008845
464	Radio for Basic Remote Control - Additional Wiring:	3 Aileron 24 in Extensions, 1 Y-Harness for Ailerons, 1 Y for Rudder, 1 Y for Elevator	20070325 00008846
465	Radio with Retracts Function:	Analog or Computer 4+1=5 Channels with 5+3=8 Servos	20070325 00008847
466	Radio with Retracts Function - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, and 2 for Retracts	20070325 00008848
467	Radio with Retracts Function - Additional Wiring:	3 Aileron 24 in. Extensions, 1 Y-Harness for Ailerons, 1 Y-Harness for Elevator, 2 Retract 24 in. Extensions and 1 Y-Harness for Retracts	20070325 00008849
468	Radio with Flaperon Function:	Computer 5 Channels with 6 Servos	20070325 00008850
469	Radio with Flaperon Function - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons	20070325 00008851
470	Radio with Flaperon Function - Additional Wiring:	4 Aileron 24 in. Extensions, 1 Y-Harness for Elevator	20070325 00008852
471	Radio with Flaperons + Retracts:	Computer 5+1= 6 Channels with 6+2= 8 Servos	20070325 00008853
473	Radio with Flaperons + Retracts - Additional Wiring:	4 Aileron 24 in. Extensions, 1 Y-Harness for Elevator, 2 Retract 24 in. Extensions and 1 Y-Harness for Retracts	20070325 00008855
474	Radio with Flap Function:	Analog or Computer 6 Channels with 8 Servos	20070325 00008856
475	Radio with Flap Function - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, 2 for Flaps	20070325 00008857
476	Radio with Flap Function - Additional Wiring:	3 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y-Harness for Ailerons, 1 Y for Flaps, 1 Y for Elevator	20070325 00008858
477	Radio with Flaps + Retracts:	Analog or Computer 5+1=6 Channels with 6+4=10 Servos	20070325 00008859
478	Radio with Flaps + Retracts - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Ailerons, 2 for Flaps, 2 for Retracts	20070325 00008860
479	Radio with Flaps + Retracts - Additional Wiring:	For Ailerons 3x24" & 1 Y-Harness, For Elevators 1 Y-Harness, For Flaps 3x24" & 1 Y-Harness, For Retracts 2x24" & 1 Y-Harness	20070325 00008861
480	Radio with Flaperons + Flaps:	Computer 6 Channels with 8 Servos	20070325 00008862
481	Radio with Flaperons + Flaps - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons, 2 for Flaps	20070325 00008863
482	Radio with Flaperons + Flaps - Additional Wiring:	4 Aileron 24 in. Extensions, 1 Flap 24 in. plus 2 Flap 12 in. Extensions, 1 Y for Flaps, 1 Y for Elevator	20070325 00008864
483	Radio with Flaperons + Flaps + Retracts:	Computer 6+1=7 Channels with 7+3=10 Servos	20070325 00008865
484	Radio with Flaperons + Flaps + Retracts - Servo Usage:	1 for Throttle, 1 for Rudder, 2 for Elevator, 2 for Flaperons, 2 for Flaps, 2 for Retracts	20070325 00008866
485	Radio with Flaperons + Flaps + Retracts - Additional Wiring:	For Ailerons 4x24", For Elevators 1 Y-Harness, For Flaps 3x24" & 1 Y-Harness, For Retracts 2x24" & 1 Y-Harness	20070325 00008867

489	SERVO MOUNTING	Back to TOP	20070325 00008871
494	Primary Location for Servos:	In Servo Bay near aft end of Fuselage (accessible via removal of Horiz Stab on bottom of Fuselage)	20070325 00008876
495	Servo Mounting Method at Primary Location:	Tray	20070325 00008877
496	Primary Servo Tray Included:	Yes	20070325 00008878
497	Primary Servo Tray Universal:	Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech	20070325 00008879
498	Primary Servo Tray Adjustable:	No	20070325 00008880
499	Primary Servo Tray Material:	Wood	20070325 00008881
500	Primary Servo Tray Number of Servos:	5	20070325 00008882
501	Primary Servo Tray hold Servos for:	Rudder and Throttle	20070325 00008883
502	Primary Servo Tray provide for Switch Mount:	No	20070325 00008884
503	Secondary Location for Servos:	In Wings	20070325 00008885
504	Servo Mounting Method at Secondary Location:	Rails	20070325 00008886
505	Secondary Servo Rails Included:	Yes	20070325 00008887
506	Secondary Servo Rails Universal:	Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech	20070325 00008888
507	Secondary Servo Rails Adjustable:	No	20070325 00008889
508	Secondary Servo Rails Material:	Wood	20070325 00008890
509	Secondary Servo Rails Number of Servos:	2	20070325 00008891
510	Secondary Servo Rails hold Servos for:	Ailerons	20070325 00008892
511	Secondary Servo Rails provide for Switch Mount:	No	20070325 00008893
512	Tertiary Location for Servos:	In Wings	20070325 00008894
513	Servo Mounting Method at Tertiary Location:	Rails	20070325 00008895
514	Tertiary Servo Rails Included:	Yes	20070325 00008896
515	Tertiary Servo Rails Universal:	Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech	20070325 00008897
516	Tertiary Servo Rails Adjustable:	No	20070325 00008898
517	Tertiary Servo Rails Material:	Wood	20070325 00008899
518	Tertiary Servo Rails Number of Servos:	2	20070325 00008900
519	Tertiary Servo Rails hold Servos for:	Flaps	20070325 00008901
520	Tertiary Servo Rails provide for Switch Mount:	No	20070325 00008902
521	Other (A) Location for Servos:	In Wings (Optional)	20070325 00008903
522	Servo Mounting Method at Other (A) Location:	Rails	20070325 00008904
523	Other (A) Servo Rails Included:	Yes	20070325 00008905
524	Other (A) Servo Rails Universal:	Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech	20070325 00008906
525	Other (A) Servo Rails Adjustable:	No	20070325 00008907
526	Other (A) Servo Rails Material:	Wood	20070325 00008908
527	Other (A) Servo Rails Number of Servos:	1	20070325 00008909
528	Other (A) Servo Rails hold Servos for:	Main Retracts (Optional)	20070325 00008910
529	Other (A) Servo Rails provide for Switch Mount:	No	20070325 00008911
530	Other (B) Location for Servos:	In Fuselage (Optional)	20070325 00008912
531	Servo Mounting Method at Other (B) Location:	Tray	20070325 00008913
532	Other (B) Servo Tray Included:	Yes	20070325 00008914
533	Other (B) Servo Tray Universal:	Yes. Fits Standard Servos from Airtronics, VRS, Futaba, JR, & HiTech	20070325 00008915
534	Other (B) Servo Tray Adjustable:	No	20070325 00008916
535	Other (B) Servo Tray Material:	Wood	20070325 00008917
536	Other (B) Servo Tray Number of Servos:	1	20070325 00008918
537	Other (B) Servo Tray hold Servos for:	Nose Retract Gear (Optional)	20070325 00008919
538	Other (B) Servo Tray provide for Switch Mount:	No	20070325 00008920

552	SET UP	Back to TOP	20070325 00008934
557	CG Measured with Respect To:	Distance Back from Forward fit of Wing Fairing (near plastic inlet) adjacent to side of Fuselage with No Fuel. (See Diagram in Assembly & Operations Manual)	20070325 00008939
558	CG Location for First Flight:	8.86 in. (225 mm)	20070325 00008940
559	CG Location Nominal:	5.71 in. (145 mm)	20070325 00008941
560	CG Location Max:	9.06 in. (230 mm)	20070325 00008942
562	Thrust Line Horizontal:	Coincident with midway point between the two factory installed T-bar engine mounts (mounts are rotated 90 degrees).	20070325 00008944
563	Thrust Line Vertical:	Up & Down through Center of Firewall	20070325 00008945
564	Rudder Movement Min & First Flight Left:	.630 in. (16 mm)	20070325 00008946
565	Rudder Movement Min & First Flight Right:	.630 in. (16 mm)	20070325 00008947
566	Rudder Movement Min & First Flight Total Left & Right:	1.260 in. (32 mm)	20070325 00008948
567	Rudder Movement Maximum Left:	.984 in. (25 mm)	20070325 00008949
568	Rudder Movement Maximum Right:	.984 in. (25 mm)	20070325 00008950
569	Rudder Movement Maximum Total Left & Right:	1.969 in. (50 mm)	20070325 00008951
570	Elevator Movement Min & First Flight Up:	.315 in. (8 mm)	20070325 00008952
571	Elevator Movement Min & First Flight Down:	.315 in. (8 mm)	20070325 00008953
572	Elevator Movement Min & First Flight Total Up & Down:	.630 in. (16 mm)	20070325 00008954
573	Elevator Movement Maximum Up:	.394 in. (10 mm)	20070325 00008955
574	Elevator Movement Maximum Down:	.394 in. (10 mm)	20070325 00008956
575	Elevator Movement Maximum Total Up & Down:	.787 in. (20 mm)	20070325 00008957
576	Aileron Movement Min & First Flight Right Up & Left Down:	.197 in. (5 mm)	20070325 00008958
577	Aileron Movement Min & First Flight Left Up & Right Down:	.197 in. (5 mm)	20070325 00008959
578	Aileron Movement Min & First Flight Total Up and Down:	.394 in. (10 mm)	20070325 00008960
579	Aileron Movement Maximum Right Up & Left Down:	.394 in. (10 mm)	20070325 00008961
580	Aileron Movement Maximum Left Up & Right Down:	.394 in. (10 mm)	20070325 00008962
581	Aileron Movement Maximum Total Up & Down:	.787 in. (20 mm)	20070325 00008963
582	Flaperon Movement Min & First Flight Down:	None. Minimize to Neutral	20070325 00008964
583	Flaperon Movement Maximum Down:	.20 in. (5.00 mm)	20070325 00008965
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
584	Flap Movement Min & First Flight Down:	None. Minimize to Neutral	20070325 00008966
585	Flap Movement Maximum Down:	.787 in. (20.00 mm)	20070325 00008967
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component
586	Speed Brake Movement Maximum (Flap) Up:	.787 in. (20.00 mm)	20070325 00008968
For more details about this component that is included with this product you may find the following link helpful: More Details about this Component

590	STABILIZER - HORIZONTAL & ELEVATOR	Back to TOP	20070325 00008972
The ("Horiz") Horizontal Stabilizer ("Stab") consists of the horizontal tailplane that is attached to the fuselage and the elevator which is the moveable control surface attached to the trailing edge of the tailplane.
592	Part#:	VMA-F590GTH	20071031 00008337
595	Dimensions:	Please See Note	20070325 00008340
The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments.
596	Terminology:	Please See Note	20070325 00008341
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
599	Horiz Stabilizer Location:	Horizontal Stabilizer saddle in bottom at aft end of Fuselage	20070325 00008344
600	Horiz Stabilizer Span Tip to Tip:	27.56 in. (700 mm)	20070325 00008345
601	Horiz Stabilizer Span (effective):	27.56 in. (700 mm)	20070325 00008346
602	Horiz Stabilizer Chord Maximum:	7.91 in. (201 mm)	20070325 00008347
603	Horiz Stabilizer Chord at outboard end of Elevator:	3.46 in. (88 mm)	20070325 00008348
604	Horiz Stabilizer Chord (effective):	5.69 in. (145 mm)	20070325 00008349
Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Saddle Width is 142 mm at the aft end of the saddle.
605	Horiz Stabilizer Area:	156.78 sq in. (1011.50 sq cm)	20070325 00008350
606	Horiz Stabilizer Area relative to Wing Area:	23.45 %	20070506 00008351
607	Horiz Stabilizer Width of Saddle:	6.24 in. (159 mm)	20070325 00008352
The Horiz Stabilizer Width of Saddle is 175 mm at the front of the saddle. The Width is 142 mm at the aft end of the saddle.
608	Horiz Stabilizer Length of Saddle:	7.95 in. (202 mm)	20070325 00008353
609	Horiz Stabilizer Area of Saddle:	49.63 sq in. (320 sq cm)	20070325 00008354
610	Horiz Stabilizer Area without Saddle:	107.16 sq in. (691.33 sq cm)	20070325 00008355
611	Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle:	20.40 %	20070325 00008356
612	Horiz Stabilizer Airfoil Shape:	Slab	20070325 00008357
613	Horiz Stabilizer Thickness Maximum:	.394 in. (10.0 mm)	20070325 00008358
617	Horiz Stabilizer Taper along Leading Edge:	Yes	20070325 00008362
618	Horiz Stabilizer Taper along Trailing Edge:	Yes	20070325 00008363
619	Horiz Stabilizer Material:	Balsa	20070325 00008364
620	Horiz Stabilizer Construction Method:	Solid	20070325 00008365
621	Horiz Stabilizer Construction Adhesive:	PVA, Cyanoacrylate and Epoxy	20070325 00008366
627	Horiz Stabilizer Attaches to Fuselage via:	Metal Bolts (x3)	20070325 00008372
629	Horiz Stabilizer Requires Struts:	No	20070325 00008374
630	Horiz Stabilizer Elevator Factory Installed:	Yes	20070325 00008375
631	Horiz Stabilizer Elevator Quantity:	2 (i.e. split into left & right halves)	20070325 00008376
632	Horiz Stabilizer Elevator Length (effective):	10.08 in. (256 mm)	20070325 00008377
Horiz Stabilizer Elevator Length is 256 mm at the hinge line (closest to the wing). The Elevator Length is 256 mm at the trailing edge.
633	Horiz Stabilizer Elevator Chord (effective):	1.95 in. (50 mm)	20070325 00008378
Horiz Stabilizer Elevator Chord is 43 mm at the inboard end (closest to the fuselage). The Elevator Chord is 56 mm at the outboard end.
634	Horiz Stabilizer Elevator Area:	39.28 sq in. (253 sq cm)	20070325 00008379
635	Horiz Stabilizer Elevator Area relative to Wing Area:	5.88 %	20070506 00008380
636	Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle:	7.48 %	20070325 00008381
637	Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area:	25.06 %	20070325 00008382
638	Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle:	36.66 %	20070325 00008383
639	Horiz Stabilizer Elevator Hinges per Elevator:	3	20070325 00008384
640	Horiz Stabilizer Elevator Hinge Type:	Flexible Live Low Gap	20070325 00008385
641	Horiz Stabilizer Elevator Hinge Material:	Proprietary Super Strong	20070325 00008386
642	Horiz Stabilizer Elevator Hinge Adhesive:	Cyanoacrylate	20070325 00008387
643	Horiz Stabilizer Elevator Hinges Pinned:	Yes, Inboard & Outboard	20070325 00008388
644	Horiz Stabilizer Elevator Servo Required:	Yes 2 Standard	20070325 00008389
645	Horiz Stabilizer Elevator Servo Location:	In servo mounts attached to the upper surface of the horizontal stabilizer within the saddle area	20070325 00008390
646	Horiz Stabilizer Elevator Servo Mounting Method:	Tray (Wood)	20070325 00008391
650	Horiz Stabilizer Color Top Schema:	Predominantly One Color	20070325 00008395
651	Horiz Stabilizer Color Top Main:	Gray	20070325 00008396
652	Horiz Stabilizer Color Top Trim:	Black. Very small elements.	20070325 00008397
653	Horiz Stabilizer Color Top Lines:	Gray	20070325 00008398
654	Horiz Stabilizer Color Top Rivets:	3D Gray	20070325 00008399
655	Horiz Stabilizer Color Top vs Bottom:	Different	20070325 00008400
656	Horiz Stabilizer Color Bottom Schema:	Predominantly One Color	20070325 00008401
657	Horiz Stabilizer Color Bottom Main:	White	20070325 00008402
658	Horiz Stabilizer Color Bottom Trim:	None	20070325 00008403
659	Horiz Stabilizer Color Bottom Lines:	Black	20070325 00008404
660	Horiz Stabilizer Color Bottom Rivets:	3D White	20070325 00008405
661	Horiz Stabilizer Weight:	.348 lbs (158 g)	20070325 00008406

665	STABILIZER - VERTICAL & RUDDER	Back to TOP	20070325 00008974
The ("Vert") Vertical Stabilizer ("Stab") consists of the vertical tailplane that is attached to the fuselage and the rudder which is the moveable control surface attached to the trailing edge of the vertical tailplane. In the vast majority of cases there is one Vertical Stabilizer per aircraft, in some relatively rare cases there are two.
667	Part#:	VMA-F590GTV	20070325 00008410
672	Source Data - Horiz Stabilizer Elevator Area:	39.28 sq in. (253 sq cm)	20070325 00008415
673	Dimensions:	Please See Note	20070325 00008416
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments.
674	Terminology:	Please See Note	20070325 00008417
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
677	Vertical Stabilizer Location:	Vertical Slot in top of aft end of Fuselage	20070325 00008420
678	Vertical Stabilizer Quantity:	1	20070325 00008421
679	Vertical Stabilizer Height Fuse to End Of Tip:	11.61 in. (295 mm)	20070325 00008422
680	Vertical Stabilizer Height (effective):	7.17 in. (182 mm)	20070325 00008423
681	Vertical Stabilizer Chord Maximum:	18.11 in. (460 mm)	20070325 00008424
682	Vertical Stabilizer Chord at tip:	3.82 in. (97 mm)	20070325 00008425
683	Vertical Stabilizer Chord (effective):	8.46 in. (215 mm)	20070325 00008426
684	Vertical Stabilizer Area:	60.65 sq in. (391.30 sq cm)	20070325 00008427
685	Vertical Stabilizer Area relative to Wing Area:	9.07 %	20070506 00008428
686	Vertical Stabilizer Area relative to Wing Area without wing saddle:	11.55 %	20070325 00008429
687	Vertical Stabilizer Airfoil Shape:	Slab	20070325 00008430
688	Vertical Stabilizer Thickness Maximum:	.390 in. (9.9 mm)	20070325 00008431
689	Vertical Stabilizer Taper along Leading Edge:	Yes	20070325 00008432
690	Vertical Stabilizer Taper along Trailing Edge:	Yes	20070325 00008433
691	Vertical Stabilizer Material:	Balsa	20070325 00008434
692	Vertical Stabilizer Construction Method:	Solid	20070325 00008435
693	Vertical Stabilizer Construction Adhesive:	PVA, Cyanoacrylate and Epoxy	20070325 00008436
698	Vertical Stabilizer Attaches to Fuselage via:	Slot in Fuselage and Adhesive	20070325 00008441
699	Vertical Stabilizer Adhesive Required:	30 Minute Epoxy	20070325 00008442
700	Vertical Stabilizer Requires Struts:	No	20070325 00008443
701	Vertical Stabilizer Rudder Factory Installed:	Yes	20070325 00008444
702	Vertical Stabilizer Rudder Quantity:	1 (i.e. dual rudders)	20070325 00008445
703	Vertical Stabilizer Rudder Length (effective):	5.57 in. (142 mm)	20070325 00008446
Vertical Stabilizer Rudder Length is 138 mm at the hinge line. The Rudder Length is 145 mm at the trailing edge.
704	Vertical Stabilizer Rudder Chord (effective):	3.41 in. (87 mm)	20070325 00008447
The Vertical Stablizer Rudder Chord is 70 mm at the tip end. The Rudder Chord is 100 mm at the root end.
705	Vertical Stabilizer Rudder Area:	18.97 sq in. (122.40 sq cm)	20070325 00008448
706	Vertical Stabilizer Rudder Area relative to Wing Area:	2.84 %	20070506 00008449
707	Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle:	3.61 %	20070325 00008450
708	Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area:	31.28 %	20070325 00008451
709	Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area:	12.10 %	20070325 00008452
710	Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle:	17.70 %	20070325 00008453
711	Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area:	48.29 %	20070325 00008454
712	Vertical Stabilizer Rudder Hinges per Rudder:	2	20070325 00008455
713	Vertical Stabilizer Rudder Hinge Type:	Flexible Live Low Gap	20070325 00008456
714	Vertical Stabilizer Rudder Hinge Material:	Proprietary Super Strong	20070325 00008457
715	Vertical Stabilizer Rudder Hinge Adhesive:	Cyanoacrylate	20070325 00008458
716	Vertical Stabilizer Rudder Hinges Pinned:	Yes	20070325 00008459
717	Vertical Stabilizer Rudder Servo Required:	Yes 2 Standard	20070325 00008460
718	Vertical Stabilizer Rudder Servo Location:	In servo bay located in bottom of aft end of Fuselage	20070325 00008461
719	Vertical Stabilizer Rudder Servo Mounting Method:	Tray (Wood)	20070325 00008462
723	Vertical Stabilizer Rudder Actuation Rod:	Yes. Along hinge line and extending down into fuselage to connect to servo via steering arm	20070325 00008466
724	Vertical Stabilizer Color Left Schema:	"VK 155669" graphic on Gray	20070325 00008467
725	Vertical Stabilizer Color Left Main:	Gray	20070325 00008468
726	Vertical Stabilizer Color Left Trim:	Small Red & Black Elements	20070325 00008469
727	Vertical Stabilizer Color Left Lines:	Gray	20070325 00008470
728	Vertical Stabilizer Color Left Rivets:	3D Gray	20070325 00008471
729	Vertical Stabilizer Color Left vs Right:	Very Similar	20070325 00008472
730	Vertical Stabilizer Color Right Schema:	"VK 155669" graphic on Gray	20070325 00008473
731	Vertical Stabilizer Color Right Main:	Gray	20070325 00008474
732	Vertical Stabilizer Color Right Trim:	Small Red & Black Elements	20070325 00008475
733	Vertical Stabilizer Color Right Lines:	Gray	20070325 00008476
734	Vertical Stabilizer Color Right Rivets:	3D Gray	20070325 00008477
735	Vertical Stabilizer Weight:	.253 lbs (115 g)	20070325 00008478

739	WEIGHTS	Back to TOP	20070429 00008976
Please note the following convention for weights: When referring to the weight of a model without radio or engine (motor) (i.e. "empty"), the range between the Min and Max weights for the empty model reflect normal variations in production weights associated with material densities. When referring to the weight of a model complete with radio and engine (motor), the Min weight reflects the sum of the Min weight of the empty model plus the weight of the minimum size engine (motor) specified for the model plus the weight of a radio system using the minimum number of channels and servos required for basic remote control of this product. When referring to the weight of a model complete with radio and engine (motor), the Max weight reflects the sum of the Max weight of the empty model plus the weight of the maximum size engine (motor) specified for the model plus the weight of a radio system using the maximum number of channels and servos specified for this product.
744	Weight of Model Only without Radio or Engine Min:	7.09 lbs (3220.88 g)	20070325 00008981
745	Weight of Model Only without Radio or Engine Max:	7.44 lbs (3381.92 g)	20070325 00008982
746	Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Min:	9.96 lbs (4527.38 g)	20070325 00008983
747	Weight Assembled with Radio & 2 stroke Engine, Dry No Fuel Max:	10.56 lbs (4798.42 g)	20070325 00008984
750	Weight Flying with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min:	10.69 lbs (4857.38 g)	20070325 00008987
751	Weight Flying with Radio & 2 stroke Engine & 11.65 (330ml) Fuel Max:	11.28 lbs (5128.42 g)	20070325 00008988

757	WING	Back to TOP	20070325 00008994
759	Part#:	VMA-F590GW	20070325 00008482
760	Dimensions:	Please See Note	20070325 00008483
The dimensions of the Wing include the mounting Saddle plus any Ailerons, Flaperons, Flaps or other control surfaces unless otherwise noted. The Aileron Quantity is the number of aileron segments. This is usually 2 with one aileron on the right wing panel plus one aileron on the left wing panel. The Aileron Length is expressed as the length per aileron segment. The Aileron Area is expressed as the total of the area of all aileron segments. Flaperons by design have the same specifications as ailerons. Flap dimensions are denoted in the same manner as ailerons. Flap Quantity is usually 2 (one on the left wing panel plus one on the right wing panel). Flap Length is the length of each flap segment and Flap Area is expressed as the total of the area of all flap segments.
761	Terminology:	Please See Note	20070325 00008484
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
764	Wing Location:	Attached to sides of Fuselage	20070325 00008487
765	Wing Span Tip to Tip:	55.59 in. (1412 mm)	20070325 00008488
766	Wing Span (effective):	55.59 in. (1412 mm)	20070325 00008489
767	Wing Chord at Root:	16.38 in. (416 mm)	20070325 00008490
The Wing Chord at Root was measured without considering the wing fairings that extend forward from the leading edge in the vicinity of the wing root.
768	Wing Chord at outboard end of Aileron:	7.68 in. (195 mm)	20070325 00008491
769	Wing Chord (effective):	12.03 in. (306 mm)	20070325 00008492
770	Wing Area:	668.62 sq in. (4313.66 sq cm)	20070325 00008493
771	Wing Width of Saddle (Effective):	8.67 in. (220 mm)	20070325 00008494
The Wing Saddle has an "Hourglass" shape. The saddle is 231 mm wide at the forward and aft ends. The saddle narrows to 199 mm in width at the midway point.
772	Wing Length of Saddle:	16.54 in. (420 mm)	20070325 00008495
773	Wing Area of Saddle only:	143.44 sq in. (925.40 sq cm)	20070325 00008496
774	Wing Area without Saddle:	525.18 sq in. (3388.26 sq cm)	20070325 00008497
775	Wing Airfoil Shape:	Symmetrical	20070325 00008498
777	Wing Dihedral at Center:	0 degrees	20070325 00008500
779	Wing Taper along Leading Edge:	Yes	20070325 00008502
780	Wing Taper Along Trailing Edge:	Yes	20070325 00008503
781	Wing Thickness Maximum:	2.24 in. (57 mm)	20070325 00008504
782	Wing Material:	Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.	20070325 00008505
783	Wing Construction Method:	Built Up	20070325 00008506
784	Wing Construction Adhesive:	PVA, Cyanoacrylate and Epoxy	20070325 00008507
785	Wing Sheeted Fully:	Yes	20070325 00008508
790	Wing Plugs In to Fuselage:	No. This is a "one piece" wing.	20070325 00008513
791	Wing Front attaches to Fuselage with:	Wood dowel in leading edge of wing	20070325 00008514
792	Wing Back attaches to Fuselage with:	2 nylon bolts	20070325 00008515
793	Wing Requires Struts:	No	20070325 00008516
806	Wing Ailerons Factory Installed:	Yes	20070325 00008529
807	Wing Ailerons Quantity:	2	20070325 00008530
808	Wing Aileron Type:	Semi-Strip (2)	20070325 00008531
809	Wing Aileron Length per Aileron (effective):	11.22 in. (285 mm)	20070325 00008532
810	Wing Aileron Chord (effective):	2.539 in. (65 mm)	20070325 00008533
Wing Aileron Chord tapers from 76 mm at the inboard end (closest to the fuselage) to 53 mm at the outboard end.
811	Wing Aileron Area:	56.99 sq in. (368 sq cm)	20070325 00008534
812	Wing Aileron Area relative to Wing Area:	8.52 %	20070325 00008535
813	Wing Aileron Area relative to Wing Area without wing saddle:	10.85 %	20070325 00008536
814	Wing Aileron Hinges per Aileron:	3	20070325 00008537
815	Wing Aileron Hinge Type:	Flexible Live Low Gap	20070325 00008538
816	Wing Aileron Hinge Material:	Proprietary Super Strong	20070325 00008539
817	Wing Aileron Hinge Adhesive:	Cyanoacrylate	20070325 00008540
818	Wing Aileron Hinges Pinned:	Yes	20070325 00008541
819	Wing Aileron Servo Required:	Yes 2 Standard	20070325 00008542
820	Wing Aileron Servo Location:	Bottom of Wing aligned approximately 30% outboard from inboard end of aileron	20070325 00008543
821	Wing Aileron Servo Rails:	Yes in Servo Cavity	20070325 00008544
823	Wing Aileron Servo Wiring Tube:	Yes	20070325 00008546
824	Wing Ailerons Flaperon Ready with Computer Radio:	Yes	20070325 00008547
825	Wing Flaps Factory Installed:	Yes	20070325 00008548
826	Wing Flaps Mandatory:	No. Can be locked at neutral position	20070325 00008549
827	Wing Flaps Quantity:	2	20070325 00008550
828	Wing Flaps useable as Spoilers or Speed Brakes by deflecting upwards:	Yes	20070426 00008551
829	Wing Flap Length per Flap (effective):	9.29 in. (236 mm)	20070325 00008552
830	Wing Flap Chord (effective):	3.130 in. (80 mm)	20070325 00008553
Wing Flap Chord tapers from 90 mm at the inboard end (closest to the fuselage) to 69 mm at the outboard end.
831	Wing Flaps Area:	58.16 sq in. (375 sq cm)	20070325 00008554
832	Wing Flap Area relative to Wing Area:	8.70 %	20070325 00008555
833	Wing Flap Area relative to Wing Area without wing saddle:	11.07 %	20070325 00008556
834	Wing Flap Hinges per Flap:	2	20070325 00008557
835	Wing Flap Hinge Type:	Flexible Live Low Gap	20070325 00008558
836	Wing Flap Hinge Material:	Proprietary Super Strong	20070325 00008559
837	Wing Flaps Hinge Adhesive:	Cyanoacrylate	20070325 00008560
838	Wing Flap Hinges Pinned:	Yes	20070325 00008561
839	Wing Flap Servo Required:	Yes 2 Standard	20070325 00008562
840	Wing Flap Servo Location:	Bottom of Wing aligned approximately with the inboard end of the flap	20070325 00008563
841	Wing Flap Servo Rails:	Yes in Servo Cavity	20070325 00008564
843	Wing Flap Servo Wiring Tube:	Yes	20070325 00008566
845	Wing Color Top Schema:	Predominantly One Color	20070325 00008568
846	Wing Color Top Main:	Gray	20070325 00008569
847	Wing Color Top Trim:	Single Stars and Bars (Red, White and Blue) Left US MARINES text Right	20070325 00008570
848	Wing Color Top Lines:	Gray	20070325 00008571
849	Wing Color Top Rivets:	3D Gray	20070325 00008572
850	Wing Color Top vs Bottom:	Different	20070325 00008573
851	Wing Color Bottom Schema:	Predominantly One Color	20070325 00008574
852	Wing Color Bottom Main:	White	20070325 00008575
853	Wing Color Bottom Trim:	Single Stars and Bars (Red, White and Blue) Right. US MARINES text Left	20070325 00008576
854	Wing Color Bottom Lines:	Gray	20070325 00008577
855	Wing Color Bottom Rivets:	3D White	20070325 00008578
856	Wing Weight:	1.64 lbs (745 g). Please See Note	20070325 00008579
The weight of the Wing is as it was when it is removed from the shipping box. This weight does NOT include the weight associated with any adhesives, spar joiners or other weight associated with end user assembly.

860	WING LOADING	Back to TOP	20070425 00008996
Please note the following convention for Wing Loading: When we say Min we mean the wing loading to be expected when using the minimum size engine (motor) specified for this model and the minimum number of servos specified for this model. When we say Max we mean the wing loading to be expected when using the maximum size engine (motor) specified for this model and the maximum number of servos specified for this model.
865	Wing Area:	668.62 sq in. (4313.66 sq cm)	20070325 00009001
866	Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Min:	34.32 oz/sq ft (1.05 g/sq cm)	20070325 00009002
867	Wing Loading with Radio & 2 Stroke Engine, Dry No Fuel Max:	36.38 oz/sq ft (1.11 g/sq cm)	20070325 00009003
868	Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Min:	36.82 oz/sq ft (1.13 g/sq cm)	20070325 00009004
869	Wing Loading with Radio & 2 stroke Engine & 11.65 oz (330 ml) Fuel Max:	38.88 oz/sq ft (1.19 g/sq cm)	20070325 00009005

875	APPENDICES	Back to TOP	20070325 00009011
The Appendice tables below provide additional information associated with this product, it's components, it's packaging or other related information.

876	PACKING LIST	Back to TOP	20070325 00009012
881	Major Component:	1 Fuselage with pre-installed Control Rods, Servo Tray and Engine Mounts.	20070325 00009017
882	Major Component:	1 Wing (Factory built as one piece)	20070325 00009018
884	Major Component:	1 Horizontal Stabilizer with pre-installed Elevators	20070325 00009020
885	Major Component:	1 Vertical Stabilizer with pre-installed Rudder	20070325 00009021
887	Major Component:	1 Main Landing Gear Bag	20070325 00009023
888	Major Component:	1 Nose Gear Bag (may be shipped in Main Gear Parts Bag)	20070325 00009024
889	Major Component:	1 Master Bag of Hardware	20070325 00009025
890	Major Component:	1 Documentation Set	20070325 00009026
891	Major Component:	Drop Tank (Dummy) and Screws	20070325 00009027
892	Major Component:	Missile Set (Dummy)	20070325 00009028
894	Major Component:	Canopy	20070325 00009030
895	Major Component:	Spinner	20070325 00009031
896	Major Component:	Retract Cavity Cover Set and Belly Pan	20070325 00009032
899	Master Bag contains:	1 Wing Parts Bag	20070325 00009035
900	Master Bag contains:	1 Control Horn Parts Bag	20070325 00009036
902	Master Bag contains:	1 Main Gear Parts Bag	20070325 00009038
904	Master Bag contains:	1 Nose Gear Parts Bag (packed in Main Gear Parts Bag)	20070325 00009040
907	Master Bag contains:	1 Miscellaneous Parts Bag (may be packed mixed with items in Spare Parts Bag)	20070325 00009043
908	Master Bag contains:	1 Spare Parts Bag	20070325 00009044
909	Master Bag contains:	1 Fuel Tank with stopper & clunk(s)	20070325 00009045
910	Master Bag contains:	1 Other Parts Bag	20070325 00009046
920	Wing Parts Bag contains:	4 Control Horn assemblies (2 for ailerons, 2 for flaps) each consisting of a metal nut, metal bolt & plastic horn, T-nut & bevelled washer	20070325 00009056
921	Wing Parts Bag contains:	2 Plastic wing mounting bolts	20070325 00009057
922	Wing Parts Bag contains:	2 Aileron control rods each with a clevis on each end	20070325 00009058
923	Wing Parts Bag contains:	2 Flap control rods each with a clevis on each end	20070325 00009059
927	Control Horn Parts Bag contains:	1 Rudder Control Rod with Clevis, EZ connector & Steering Arm	20070325 00009063
928	Control Horn Parts Bag contains:	2 Control Rods each with a Clevis on each end	20070325 00009064
929	Main Gear Parts Bag contains:	1 Main Gear (left) with Simulated Oleo Strut and Wheel with Collar	20070325 00009065
930	Main Gear Parts Bag contains:	1 Main Gear (right) with Simulated Oleo Strut and Wheel with Collar	20070325 00009066
940	Nose Gear Parts Bag contains:	1 Nose Gear with Simulated Oleo Strut with Wheel and Collar	20070325 00009076
941	Nose Gear Parts Bag contains:	1 Steering Arm with retaining screw	20070325 00009077
942	Nose Gear Parts Bag contains:	1 Wheel Collar	20070325 00009078
963	Miscellaneous Parts Bag contains:	1 Tray for optional servo for Nose Retract, 2 Wood Rails and 4 large self tapping Screws to attach the Engine to the Engine Mounts	20070325 00009099
964	Spare Parts Bag contains:	1 Control Horn assembly each consisting of a metal nut, metal bolt and plastic horn, T-nut and bevelled washer	20070325 00009100
965	Spare Parts Bag contains:	1 Plastic wing bolt	20070325 00009101
966	Spare Parts Bag contains:	1 Clevis	20070325 00009102
967	Spare Parts Bag contains:	1 Metal bolt (long) with washers and nut	20070325 00009103
970	Spare Parts Bag contains:	2 Extra Clevis Screws	20070325 00009106
972	Spare Parts Bag contains:	4 small wood Screws	20070326 00009108
973	Other Parts Bag contains:	8 pan head Phillips Screws for the Main Gear	20070325 00009109
974	Other Parts Bag contains:	1 Allen Wrench	20070325 00009110
978	Documentation Set contains:	1 Assembly and Operations Manual	20070325 00009114

986	PACKAGING (BOX 1 OF 2) - FUSELAGE	Back to TOP	20070325 00009122
This Product is shipped in 2 boxes. The following information pertains to Box 1 of 2. This box contains the Fuselage and may contain other smaller components.
987	Dimensions:	Please See Note	20070325 00009123
The Display Box contains the product and is intended for display in a retail or end user environment. The Display Box weight also includes the weight of the protective Shipping Bog. The Shipping Box completely surrounds and contains the Display Box and the product itself.
988	Terminology:	Please See Note	20070325 00009124
The term "Length" refers to the longest side of a box, "Width" refers to the second longest side and "Height" refers to the shortest side of a box. The term "Girth" refers to the sum of the Width + Width + Height + Height. Think of this as the distance around (i.e. waistline) an object. The term "Length + Girth" refers to the sum of the Length plus the Girth and is used by some carriers for the calculation of size limits. The term "Volume" refers to the multiple of the Length x Width x Height. The term "Density" refers to Weight/Volume. The term "Dimensional Weight" refers to the weight that is calculated for an object assuming a density requirement of X lbs per cubic foot where X is typically in the range of 8 to 15 lbs/cuft. Carriers charge freight based on the larger of the actual Weight or the Dimensional Weight. For light bulky items such as ARF model airplanes the Dimensional Weight is usually the larger and many carriers use this as the basis for shipping charges. Air Shipments always use the Dimensional Weight applicable for Air Shipments. For reference purposes we show Dimensional Weights here for both Ground and Air shipments.
991	Packaging:	1 Shipping Box	20070325 00009127
993	Packaging:	1 Plastic Shipping Bag	20070325 00009129
994	Packaging:	1 Display Box	20070325 00009130
995	Display Box Material:	White Cardboard with Color Label	20070325 00009131
996	Display Box Weight with Contents:	9.50 lbs (4318 g)	20070325 00009132
997	Display Box Size Outside Length:	62.60 in. (1590 mm)	20070325 00009133
998	Display Box Size Outside Width:	10.55 in. (268 mm)	20070325 00009134
999	Display Box Size Outside Height:	9.06 in. (230 mm)	20070325 00009135
1000	Display Box Size Outside Length + Width + Height:	82.20 in. (2088 mm)	20070325 00009136
1001	Display Box Size Outside Length + Girth:	101.81 in. (2586 mm)	20070325 00009137
1002	Display Box Size Outside Volume:	3.46 cu ft. (.10 cbm)	20070325 00009138
1003	Display Box Size Outside Density:	2.74 lbs/cu ft. (44 kg/cbm)	20070325 00009139
1004	Display Box Label Colors Primary:	Red, White & Black	20070325 00009140
1005	Display Box Label Coverage Front:	41.93 x 9.76 in. (1065 248 mm)	20070325 00009141
1008	Display Box Label End Panel A:	3.74 x .75 in. (95 19 mm)	20070325 00009144
1011	Shipping Box Material:	Brown Cardboard with inner Plywood Shields	20070325 00009147
1012	Shipping Box Weight with Contents:	12.60 lbs (5727 g)	20110223 00009148
1013	Shipping Box Size Outside Length:	64.17 in. (1630 mm)	20110223 00009149
1014	Shipping Box Size Outside Width:	11.34 in. (288 mm)	20110223 00009150
1015	Shipping Box Size Outside Height:	9.49 in. (241 mm)	20110223 00009151
1016	Shipping Box Size Outside Length + Width + Height:	85.00 in. (2159 mm)	20110223 00009152
1017	Shipping Box Size Outside Length + Girth:	105.83 in. (2688 mm)	20110223 00009153
1018	Shipping Box Size Outside Volume:	4.00 cu ft. (.11 cbm)	20110223 00009154
1019	Shipping Box Size Outside Density:	3.15 lbs/cu ft. (51 kg/cbm)	20110223 00009155
1020	Shipping Box has a Dimensional Weight of:	35.59 lbs @ UPS Ground Requirement of 8.91 lbs/cu ft. (per factor of 194.00)	20110223 00009156
1021	Shipping Box has a Dimensional Weight of:	41.59 lbs @ UPS Air Requirement of 10.41 lbs/cu ft. (per factor of 166.00)	20110223 00009157

1026	PACKAGING (BOX 2 OF 2) - WING	Back to TOP	20070325 00009162
This Product is shipped in 2 boxes. The following information pertains to Box 2 of 2. This box contains the Wing and may contain other smaller components.
1027	Dimensions:	Please See Note	20070325 00009163
The Display Box contains the product and is intended for display in a retail or end user environment. The Display Box weight also includes the weight of the protective Shipping Bog. The Shipping Box completely surrounds and contains the Display Box and the product itself.
1028	Terminology:	Please See Note	20070325 00009164
The term "Length" refers to the longest side of a box, "Width" refers to the second longest side and "Height" refers to the shortest side of a box. The term "Girth" refers to the sum of the Width + Width + Height + Height. Think of this as the distance around (i.e. waistline) an object. The term "Length + Girth" refers to the sum of the Length plus the Girth and is used by some carriers for the calculation of size limits. The term "Volume" refers to the multiple of the Length x Width x Height. The term "Density" refers to Weight/Volume. The term "Dimensional Weight" refers to the weight that is calculated for an object assuming a density requirement of X lbs per cubic foot where X is typically in the range of 8 to 15 lbs/cuft. Carriers charge freight based on the larger of the actual Weight or the Dimensional Weight. For light bulky items such as ARF model airplanes the Dimensional Weight is usually the larger and many carriers use this as the basis for shipping charges. Air Shipments always use the Dimensional Weight applicable for Air Shipments. For reference purposes we show Dimensional Weights here for both Ground and Air shipments.
1031	Packaging:	1 Shipping Box	20070325 00009167
1032	Packaging:	2 Plywood Shipping Shield	20070325 00009168
1033	Packaging:	1 Plastic Shipping Bag	20070325 00009169
1034	Packaging:	1 Display Box	20070325 00009170
1035	Display Box Material:	White Cardboard with Color Label	20070325 00009171
1036	Display Box Weight with Contents:	11.95 lbs (5432 g)	20070325 00009172
1037	Display Box Size Outside Length:	62.52 in. (1588 mm)	20070325 00009173
1038	Display Box Size Outside Width:	21.85 in. (555 mm)	20070325 00009174
1039	Display Box Size Outside Height:	4.33 in. (110 mm)	20070325 00009175
1040	Display Box Size Outside Length + Width + Height:	88.70 in. (2253 mm)	20070325 00009176
1041	Display Box Size Outside Length + Girth:	114.88 in. (2918 mm)	20070325 00009177
1042	Display Box Size Outside Volume:	3.42 cu ft. (.10 cbm)	20070325 00009178
1043	Display Box Size Outside Density:	3.49 lbs/cu ft. (56 kg/cbm)	20070325 00009179
1044	Display Box Label Colors Primary:	Red, White & Black	20070325 00009180
1045	Display Box Label Coverage Front:	41.93 x 20.47 in. (1065 520 mm)	20070325 00009181
1048	Display Box Label End Panel A:	3.74 x .75 in. (95 19 mm)	20070325 00009184
1051	Shipping Box Material:	Brown Cardboard with inner Plywood Shields	20070325 00009187
1052	Shipping Box Weight with Contents:	17.40 lbs (7909 g)	20070325 00009188
1053	Shipping Box Size Outside Length:	63.90 in. (1623 mm)	20070325 00009189
1054	Shipping Box Size Outside Width:	22.83 in. (580 mm)	20070325 00009190
1055	Shipping Box Size Outside Height:	4.92 in. (125 mm)	20070325 00009191
1056	Shipping Box Size Outside Length + Width + Height:	91.65 in. (2328 mm)	20070325 00009192
1057	Shipping Box Size Outside Length + Girth:	119.41 in. (3033 mm)	20070325 00009193
1058	Shipping Box Size Outside Volume:	4.16 cu ft. (.12 cbm)	20070325 00009194
1059	Shipping Box Size Outside Density:	4.19 lbs/cu ft. (67 kg/cbm)	20070325 00009195
1060	Shipping Box has a Dimensional Weight of:	37.01 lbs @ UPS Ground Requirement of 8.91 lbs/cu ft. (per factor of 194.00)	20070325 00009196
1061	Shipping Box has a Dimensional Weight of:	43.26 lbs @ UPS Air Requirement of 10.41 lbs/cu ft. (per factor of 166.00)	20070325 00009197

1066	PRECISION	Back to TOP	20100217 00009202
In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice Within the limitations of this Condition of Use and the Liability Disclaimer, the data published here is intended to meet the following standards of precision.
1072	Units of Measure:	All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial.	20070106 00003923
1073	In general, measurements are accurate to within:	+ - 3% except + - .30 for measurements of magnitude 10.0 or less.	20070106 00003916
1074	Distances such as length, width, depth, thickness etc are measured to the nearest:	1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less	20070106 00003917
When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision.
1075	Weights and Mass are measured to the nearest:	1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less	20070106 00003924
1076	Volumes related to fluids are measured to the nearest:	1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less	20070106 00003925
1077	Volumes related to non-fluids are measured to the nearest:	.01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less.	20070106 00003926

20120828 04:09:40 PST. Subject to Change Without Notice.

Copyright Richmond RC Supply Ltd. VMA-F590G_spec.htm