1 | Part#: | VMA-F590GTV |
20070325 00008410 |
6 | Source Data - Horiz Stabilizer Elevator Area: | 39.28 sq in. (253 sq cm) |
20070325 00008415 |
7 | Dimensions: | Please See Note |
20070325 00008416 |
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments. | |||
8 | Terminology: | Please See Note |
20070325 00008417 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
11 | Vertical Stabilizer Location: | Vertical Slot in top of aft end of Fuselage |
20070325 00008420 |
12 | Vertical Stabilizer Quantity: | 1 |
20070325 00008421 |
13 | Vertical Stabilizer Height Fuse to End Of Tip: | 11.61 in. (295 mm) |
20070325 00008422 |
14 | Vertical Stabilizer Height (effective): | 7.17 in. (182 mm) |
20070325 00008423 |
15 | Vertical Stabilizer Chord Maximum: | 18.11 in. (460 mm) |
20070325 00008424 |
16 | Vertical Stabilizer Chord at tip: | 3.82 in. (97 mm) |
20070325 00008425 |
17 | Vertical Stabilizer Chord (effective): | 8.46 in. (215 mm) |
20070325 00008426 |
18 | Vertical Stabilizer Area: | 60.65 sq in. (391.30 sq cm) |
20070325 00008427 |
19 | Vertical Stabilizer Area relative to Wing Area: | 9.07 % |
20070506 00008428 |
20 | Vertical Stabilizer Area relative to Wing Area without wing saddle: | 11.55 % |
20070325 00008429 |
21 | Vertical Stabilizer Airfoil Shape: | Slab |
20070325 00008430 |
22 | Vertical Stabilizer Thickness Maximum: | .390 in. (9.9 mm) |
20070325 00008431 |
23 | Vertical Stabilizer Taper along Leading Edge: | Yes |
20070325 00008432 |
24 | Vertical Stabilizer Taper along Trailing Edge: | Yes |
20070325 00008433 |
25 | Vertical Stabilizer Material: | Balsa |
20070325 00008434 |
26 | Vertical Stabilizer Construction Method: | Solid |
20070325 00008435 |
27 | Vertical Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070325 00008436 |
32 | Vertical Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070325 00008441 |
33 | Vertical Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070325 00008442 |
34 | Vertical Stabilizer Requires Struts: | No |
20070325 00008443 |
35 | Vertical Stabilizer Rudder Factory Installed: | Yes |
20070325 00008444 |
36 | Vertical Stabilizer Rudder Quantity: | 1 (i.e. dual rudders) |
20070325 00008445 |
37 | Vertical Stabilizer Rudder Length (effective): | 5.57 in. (142 mm) |
20070325 00008446 |
Vertical Stabilizer Rudder Length is 138 mm at the hinge line. The Rudder Length is 145 mm at the trailing edge. | |||
38 | Vertical Stabilizer Rudder Chord (effective): | 3.41 in. (87 mm) |
20070325 00008447 |
The Vertical Stablizer Rudder Chord is 70 mm at the tip end. The Rudder Chord is 100 mm at the root end. | |||
39 | Vertical Stabilizer Rudder Area: | 18.97 sq in. (122.40 sq cm) |
20070325 00008448 |
40 | Vertical Stabilizer Rudder Area relative to Wing Area: | 2.84 % |
20070506 00008449 |
41 | Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle: | 3.61 % |
20070325 00008450 |
42 | Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area: | 31.28 % |
20070325 00008451 |
43 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area: | 12.10 % |
20070325 00008452 |
44 | Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle: | 17.70 % |
20070325 00008453 |
45 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area: | 48.29 % |
20070325 00008454 |
46 | Vertical Stabilizer Rudder Hinges per Rudder: | 2 |
20070325 00008455 |
47 | Vertical Stabilizer Rudder Hinge Type: | Flexible Live Low Gap |
20070325 00008456 |
48 | Vertical Stabilizer Rudder Hinge Material: | Proprietary Super Strong |
20070325 00008457 |
49 | Vertical Stabilizer Rudder Hinge Adhesive: | Cyanoacrylate |
20070325 00008458 |
50 | Vertical Stabilizer Rudder Hinges Pinned: | Yes |
20070325 00008459 |
51 | Vertical Stabilizer Rudder Servo Required: | Yes 2 Standard |
20070325 00008460 |
52 | Vertical Stabilizer Rudder Servo Location: | In servo bay located in bottom of aft end of Fuselage |
20070325 00008461 |
53 | Vertical Stabilizer Rudder Servo Mounting Method: | Tray (Wood) |
20070325 00008462 |
57 | Vertical Stabilizer Rudder Actuation Rod: | Yes. Along hinge line and extending down into fuselage to connect to servo via steering arm |
20070325 00008466 |
58 | Vertical Stabilizer Color Left Schema: | "VK 155669" graphic on Gray |
20070325 00008467 |
59 | Vertical Stabilizer Color Left Main: | Gray |
20070325 00008468 |
60 | Vertical Stabilizer Color Left Trim: | Small Red & Black Elements |
20070325 00008469 |
61 | Vertical Stabilizer Color Left Lines: | Gray |
20070325 00008470 |
62 | Vertical Stabilizer Color Left Rivets: | 3D Gray |
20070325 00008471 |
63 | Vertical Stabilizer Color Left vs Right: | Very Similar |
20070325 00008472 |
64 | Vertical Stabilizer Color Right Schema: | "VK 155669" graphic on Gray |
20070325 00008473 |
65 | Vertical Stabilizer Color Right Main: | Gray |
20070325 00008474 |
66 | Vertical Stabilizer Color Right Trim: | Small Red & Black Elements |
20070325 00008475 |
67 | Vertical Stabilizer Color Right Lines: | Gray |
20070325 00008476 |
68 | Vertical Stabilizer Color Right Rivets: | 3D Gray |
20070325 00008477 |
69 | Vertical Stabilizer Weight: | .253 lbs (115 g) |
20070325 00008478 |