Product Information
PRODUCT INFORMATION
 
 
SPC-TM_SV25J
SPEC TEMPLATE MASTER - STAB VERTICAL - SV25J
 
 



1 Part#: SPC-TM SV25J   20070114
00003869
7 Dimensions: Please See Note   20061231
00003704
The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments.
8 Terminology: Please See Note   20070113
00003705
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
11 Vertical Stabilizer Location: Vertical Slot in Top of aft end of Fuselage   20061231
00003708
12 Vertical Stabilizer Quantity: 1   20061231
00003709
13 Vertical Stabilizer Height Fuse to End Of Tip: 7.44 in. (189 mm)   20070113
00003710
14 Vertical Stabilizer Height (effective): 5.59 in. (142 mm)   20070114
00003711
15 Vertical Stabilizer Chord Maximum: 13.98 in. (355 mm)   20061231
00003712
16 Vertical Stabilizer Chord at tip end of Rudder: 4.06 in. (103 mm)   20061231
00003713
17 Vertical Stabilizer Chord (effective): 9.31 in. (236.6 mm)   20070114
00003714
18 Vertical Stabilizer Area: 52.08 sq in. (335.97 sq cm)   20070114
00003715
19 Vertical Stabilizer Area relative to Wing Area: 7.53 %   20070114
00003716
20 Vertical Stabilizer Area relative to Wing Area without wing saddle: 8.04 %   20070114
00003890
21 Vertical Stabilizer Airfoil Shape: Slab   20061231
00003717
22 Vertical Stabilizer Thickness Maximum: .335 in. (8.5 mm)   20070106
00003718
23 Vertical Stabilizer Taper along Leading Edge: Yes   20061231
00003719
24 Vertical Stabilizer Taper along Trailing Edge: Yes   20061231
00003720
25 Vertical Stabilizer Material: Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.   20061231
00003721
26 Vertical Stabilizer Construction Method: Built Up   20061231
00003722
27 Vertical Stabilizer Construction Adhesive: PVA, Cyanoacrylate and Epoxy   20070115
00004267
32 Vertical Stabilizer Attaches to Fuselage via: Slot in Fuselage and Adhesive   20061231
00003727
33 Vertical Stabilizer Adhesive Required: 30 Minute Epoxy   20061231
00003728
34 Vertical Stabilizer Requires Struts: No   20061231
00003729
35 Vertical Stabilizer Rudder Factory Installed: Yes   20061231
00003730
36 Vertical Stabilizer Rudder Quantity: 1 (i.e. not split, not dual rudders)   20061231
00003731
46 Vertical Stabilizer Rudder Hinges per Rudder: 2   20070113
00003741
47 Vertical Stabilizer Rudder Hinge Type: Flexible Live Low Gap   20070116
00003742
48 Vertical Stabilizer Rudder Hinge Material: Proprietary Super Strong   20070116
00003744
49 Vertical Stabilizer Rudder Hinge Adhesive: Cyanoacrylate   20070116
00003743
50 Vertical Stabilizer Rudder Hinges Pinned: Yes   20061231
00003745
51 Vertical Stabilizer Rudder Servo Required: Yes 1 Standard   20061231
00003746
52 Vertical Stabilizer Rudder Servo Location: In Fuselage Radio Bay   20061231
00003747
53 Vertical Stabilizer Rudder Servo Mounting Method: Tray   20070113
00003748
58 Vertical Stabilizer Color Left Schema: Diagonal Bands   20061231
00003750
59 Vertical Stabilizer Color Left Main: Dark Red & Orange & White or Dark Blue, Light Blue & White   20061231
00003751
60 Vertical Stabilizer Color Left Trim: Orange or Light Blue   20061231
00003752
61 Vertical Stabilizer Color Left Lines: Orange or Light Blue   20061231
00003753
62 Vertical Stabilizer Color Left Rivets: Gray   20061231
00003754
63 Vertical Stabilizer Color Left vs Right: Very Similar   20061231
00003755
64 Vertical Stabilizer Color Right Schema: Diagonal and Horizontal Bands   20061231
00003756
65 Vertical Stabilizer Color Right Main: Dark Red, Orange & White or Dark Blue, Light Blue & White   20061231
00003757
66 Vertical Stabilizer Color Right Trim: Orange or Light Blue   20061231
00003758
67 Vertical Stabilizer Color Right Lines: Orange or Light Blue   20061231
00003759
68 Vertical Stabilizer Color Right Rivets: Gray   20061231
00003760
69 Vertical Stabilizer Weight: 2199.998 lbs (999999 g)   20070106
00003761

20100307 23:47:02 PST. Subject to Change Without Notice.
Copyright Richmond RC Supply Ltd. SPC-TM_SV25J_spec.htm