1 | Part#: | SPC-TM SH25J |
20070114 00003868 |
4 | Dimensions: | Please See Note |
20061231 00003632 |
The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
5 | Terminology: | Please See Note |
20070115 00003633 |
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
8 | Horiz Stabilizer Location: | Horizontal Stabilizer slot in aft end of Fuselage |
20070112 00003636 |
9 | Horiz Stabilizer Span Tip to Tip: | 23.62 in. (600 mm) |
20061231 00003637 |
10 | Horiz Stabilizer Span (effective): | 23.03 in. (585 mm) |
20061231 00003638 |
11 | Horiz Stabilizer Chord Maximum: | 7.56 in. (192 mm) |
20061231 00003639 |
12 | Horiz Stabilizer Chord at outboard end of Elevator: | 6.10 in. (155 mm) |
20061231 00003640 |
13 | Horiz Stabilizer Chord (effective): | 6.83 in. (174 mm) |
20070112 00003641 |
14 | Horiz Stabilizer Area: | 157.32 sq in. (1014.98 sq cm) |
20070113 00003642 |
15 | Horiz Stabilizer Area relative to Wing Area: | 22.75 % |
20070114 00003643 |
16 | Horiz Stabilizer Length of Saddle: | 3.90 in. (99 mm) |
20070111 00004185 |
17 | Horiz Stabilizer Width of Saddle: | 3.90 in. (99 mm) |
20070111 00004186 |
18 | Horiz Stabilizer Area of Saddle: | 15.19 sq in. (98 sq cm) |
20070111 00003644 |
19 | Horiz Stabilizer Area without Saddle: | 142.13 sq in. (916.97 sq cm) |
20070113 00003645 |
20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 21.93 % |
20070506 00003646 |
21 | Horiz Stabilizer Airfoil Shape: | Slab |
20061231 00003647 |
22 | Horiz Stabilizer Thickness Maximum: | .335 in. (8.5 mm) |
20070106 00003648 |
26 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20061231 00003652 |
27 | Horiz Stabilizer Taper along Trailing Edge: | No |
20061231 00003653 |
28 | Horiz Stabilizer Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20061231 00003654 |
29 | Horiz Stabilizer Construction Method: | Built Up |
20061231 00003655 |
30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070115 00004266 |
31 | Horiz Stabilizer Sheeted Fully: | No |
20061231 00003656 |
35 | Horiz Stabilizer Ribs Capped: | Yes |
20061231 00003660 |
36 | Horiz Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20061231 00003661 |
37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20061231 00003662 |
38 | Horiz Stabilizer Requires Struts: | No |
20070111 00003663 |
39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20061231 00003664 |
40 | Horiz Stabilizer Elevator Quantity: | 1 (i.e. not split into left & right halves) |
20061231 00003665 |
41 | Horiz Stabilizer Elevator Length (effective): | 22.83 in. (580 mm) |
20070115 00003667 |
Horiz Stablizer Elevator Length is ___ mm at the hinge line (closest to the wing). The Elevator Length is ___ mm at the trailing edge. | |||
48 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070113 00003675 |
49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070116 00003676 |
50 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070116 00003677 |
51 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070116 00003678 |
52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20061231 00003679 |
53 | Horiz Stabilizer Elevator Servo Required: | Yes 1 Standard |
20061231 00003680 |
54 | Horiz Stabilizer Elevator Servo Location: | In Fuselage Radio Bay |
20061231 00003681 |
55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070111 00003682 |
59 | Horiz Stabilizer Color Top Schema: | Red or Blue Diagonal Pattern |
20061231 00003684 |
60 | Horiz Stabilizer Color Top Main: | Red or Dark Blue |
20061231 00003685 |
61 | Horiz Stabilizer Color Top Trim: | White |
20061231 00003686 |
62 | Horiz Stabilizer Color Top Lines: | Gray |
20061231 00003687 |
63 | Horiz Stabilizer Color Top Rivets: | Gray |
20061231 00003688 |
64 | Horiz Stabilizer Color Top vs Bottom: | Very Different |
20061231 00003689 |
65 | Horiz Stabilizer Color Bottom Schema: | One color |
20061231 00003690 |
66 | Horiz Stabilizer Color Bottom Main: | Yellow |
20061231 00003691 |
67 | Horiz Stabilizer Color Bottom Trim: | White |
20061231 00003692 |
68 | Horiz Stabilizer Color Bottom Lines: | Gray |
20061231 00003693 |
69 | Horiz Stabilizer Color Bottom Rivets: | Gray |
20061231 00003694 |
70 | Horiz Stabilizer Weight: | 2199.998 lbs (999999 g) |
20070106 00003695 |