NEWS FLASH... Check out our DISCOUNT LINKS and SAVE 15-70+% on Epoxy, Servos, Chargers, RC ARF Floats and MORE!!
| 1 | Part#: | VMA-F690BTH |
20070222 00005422 |
| 4 | Dimensions: | Please See Note |
20070222 00005425 |
| The dimensions of the Horizontal Stabilizer include the mounting Saddle and Elevator unless otherwise noted. The Elevator Quantity is the number of elevator segments. This is usually 1 or 2. i.e. 1 if the elevator is one piece, 2 if the elevator is split into a right and left segment. The Elevator Length is expressed as the length per elevator segment. The Elevator Area is expressed as the total of the area of all elevator segments. | |||
| 5 | Terminology: | Please See Note |
20070222 00005426 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 8 | Horiz Stabilizer Location: | Horizontal Stabilizer slot in aft end of Fuselage |
20070222 00005429 |
| 9 | Horiz Stabilizer Span Tip to Tip: | 32.48 in. (825 mm) |
20070222 00005430 |
| 10 | Horiz Stabilizer Span (effective): | 32.32 in. (821 mm) |
20070222 00005431 |
| 11 | Horiz Stabilizer Chord Maximum: | 7.76 in. (197 mm) |
20070222 00005432 |
| 12 | Horiz Stabilizer Chord at outboard end of Elevator: | 4.80 in. (122 mm) |
20070222 00005433 |
| 13 | Horiz Stabilizer Chord (effective): | 6.28 in. (160 mm) |
20070222 00005434 |
| 14 | Horiz Stabilizer Area: | 202.97 sq in. (1309.50 sq cm) |
20070222 00005435 |
| 15 | Horiz Stabilizer Area relative to Wing Area: | 27.42 % |
20070222 00005436 |
| 16 | Horiz Stabilizer Width of Saddle: | 9.02 in. (229 mm) |
20070222 00005437 |
| 17 | Horiz Stabilizer Length of Saddle: | 7.76 in. (197 mm) |
20070222 00005438 |
| 18 | Horiz Stabilizer Area of Saddle: | 69.93 sq in. (451 sq cm) |
20070222 00005439 |
| 19 | Horiz Stabilizer Area without Saddle: | 133.05 sq in. (858.37 sq cm) |
20070222 00005440 |
| 20 | Horiz Stabilizer Area without saddle relative to Wing Area without wing saddle: | 23.22 % |
20070222 00005441 |
| 21 | Horiz Stabilizer Airfoil Shape: | Slab |
20070222 00005442 |
| 22 | Horiz Stabilizer Thickness Maximum: | .394 in. (10.0 mm) |
20070222 00005443 |
| 26 | Horiz Stabilizer Taper along Leading Edge: | Yes |
20070222 00005447 |
| 27 | Horiz Stabilizer Taper along Trailing Edge: | No |
20070222 00005448 |
| 28 | Horiz Stabilizer Material: | Balsa |
20070222 00005449 |
| 29 | Horiz Stabilizer Construction Method: | Solid |
20070222 00005450 |
| 30 | Horiz Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070222 00005451 |
| 36 | Horiz Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070222 00005457 |
| 37 | Horiz Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070222 00005458 |
| 38 | Horiz Stabilizer Requires Struts: | No |
20070222 00005459 |
| 39 | Horiz Stabilizer Elevator Factory Installed: | Yes |
20070222 00005460 |
| 40 | Horiz Stabilizer Elevator Quantity: | 2 (i.e. split into left & right halves) |
20070222 00005461 |
| 41 | Horiz Stabilizer Elevator Length (effective): | 13.62 in. (346 mm) |
20070222 00005462 |
| Horiz Stabilizer Elevator Length is 346 mm at the hinge line (closest to the wing). The Elevator Length is 346 mm at the trailing edge. | |||
| 42 | Horiz Stabilizer Elevator Chord (effective): | 2.72 in. (69 mm) |
20070222 00005463 |
| Horiz Stabilizer Elevator Chord is 69 mm at the inboard end (closest to the fuselage). The Elevator Chord is 69 mm at the outboard end. | |||
| 43 | Horiz Stabilizer Elevator Area: | 74.01 sq in. (477 sq cm) |
20070222 00005464 |
| 44 | Horiz Stabilizer Elevator Area relative to Wing Area: | 10.00 % |
20070222 00005465 |
| 45 | Horiz Stabilizer Elevator Area relative to Wing Area without wing saddle: | 12.92 % |
20070222 00005466 |
| 46 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area: | 36.46 % |
20070222 00005467 |
| 47 | Horiz Stabilizer Elevator Area relative to Horiz Stabilizer Area without saddle: | 55.63 % |
20070222 00005468 |
| 48 | Horiz Stabilizer Elevator Hinges per Elevator: | 3 |
20070222 00005469 |
| 49 | Horiz Stabilizer Elevator Hinge Type: | Flexible Live Low Gap |
20070222 00005470 |
| 50 | Horiz Stabilizer Elevator Hinge Material: | Proprietary Super Strong |
20070222 00005471 |
| 51 | Horiz Stabilizer Elevator Hinge Adhesive: | Cyanoacrylate |
20070222 00005472 |
| 52 | Horiz Stabilizer Elevator Hinges Pinned: | Yes, Inboard & Outboard |
20070222 00005473 |
| 53 | Horiz Stabilizer Elevator Servo Required: | Yes 1 Standard |
20070222 00005474 |
| 54 | Horiz Stabilizer Elevator Servo Location: | In servo bay located in bottom of aft end of Fuselage |
20070222 00005475 |
| 55 | Horiz Stabilizer Elevator Servo Mounting Method: | Tray (Wood) |
20070222 00005476 |
| 59 | Horiz Stabilizer Color Top Schema: | Blue Angels |
20070222 00005480 |
| 60 | Horiz Stabilizer Color Top Main: | Blue |
20070222 00005481 |
| 61 | Horiz Stabilizer Color Top Trim: | Yellow at Tips. Very small black elements |
20070222 00005482 |
| 62 | Horiz Stabilizer Color Top Lines: | Gray |
20070222 00005483 |
| 63 | Horiz Stabilizer Color Top Rivets: | 3D Gray |
20070222 00005484 |
| 64 | Horiz Stabilizer Color Top vs Bottom: | Very Similar |
20070222 00005485 |
| 65 | Horiz Stabilizer Color Bottom Schema: | Blue Angels |
20070222 00005486 |
| 66 | Horiz Stabilizer Color Bottom Main: | Blue |
20070222 00005487 |
| 67 | Horiz Stabilizer Color Bottom Trim: | Yellow at Tips. Very small black elements |
20070222 00005488 |
| 68 | Horiz Stabilizer Color Bottom Lines: | Gray |
20070222 00005489 |
| 69 | Horiz Stabilizer Color Bottom Rivets: | 3D Gray |
20070222 00005490 |
| 70 | Horiz Stabilizer Weight: | .407 lbs (185 g) |
20070222 00005491 |
